hathach
c0d1d0c101
rename port.c for different cortex --> able to add them in keil uvision
2014-03-03 17:37:40 +07:00
hathach
17c94b2e5e
clean up freeRTOS folders
2014-03-03 17:32:56 +07:00
hathach
9604645f24
ported freeRTOS with lpc175x_6x, all host demo work
2014-03-03 16:54:17 +07:00
hathach
22a84f744d
able to build freeRTOS with lpc175x_6x
2014-03-03 16:25:34 +07:00
hathach
6770a36cba
added port FreeRTOS for lpc175x
2014-03-03 15:28:16 +07:00
hathach
037c49489c
freeRTOS host demo work with keil
2014-03-02 21:46:14 +07:00
hathach
90b7ead017
refine keyboard host demo (added new line for enter key)
2014-03-02 21:39:18 +07:00
hathach
b5ce076d8d
increase msc host app task stack size to 512 so that copy command can be executed
2014-03-02 18:11:30 +07:00
hathach
5f8f046eaa
refractor remove tusbh_msc_is_failed
...
increase usbh enum task from 150 to 200 due to stack overflow when mounting msc device
added task for msc host freeRTOS with stack = 300 (still cannot execute copy command)
2014-02-28 18:42:33 +07:00
hathach
da6b2fbef8
EHCI: immediately reset port when device connected. This proves to help prevent duplication connection event (also with OHCI)
...
increase delay after reset to 100 ms (NXP's EHCI does not work with 50ms)
--> fix all duplication connection with OHCI & EHCI
2014-02-28 17:08:47 +07:00
hathach
e979f22f93
remove test unit ready with disk_ioctl (cmd=CTRL_SYNC) as it is proved to be not needed
2014-02-28 16:31:57 +07:00
hathach
a1978e20fe
merge common define in osal/osal_cmsis_rtx.h & osal/osal_freeRTOS.h
2014-02-28 15:50:04 +07:00
hathach
856be67189
keil support for lpc17xx host
2014-02-20 16:31:34 +07:00
hathach
4b6c6929cb
fix the duplicated plug connection status change with lpc17xx by using immediate reset on isr. However Khanh's G5 mouse is not enumerated !!
...
remove TUSB_CFG_CONFIGURATION_MAX from config file
fix some warning
2014-02-20 16:06:31 +07:00
hathach
533c8d2eed
use hcd_pipe_is_busy instead of hcd_pipe_is_idle
...
remove hcd_pipe_is_idle
2014-02-20 10:41:31 +07:00
hathach
d86523b16c
re-enable blocking waiting in ehci controller reset (otherwise it wont works)
2014-02-19 15:50:39 +07:00
hathach
bbe26facb3
some code clean up
...
NOTE: host on ea4357 does not work anymore
2014-02-19 15:29:29 +07:00
hathach
03ad1afef9
clean up warnings
2014-01-24 22:04:59 +07:00
hathach
a982a52ab3
refractor __n2be_16
2014-01-24 21:51:24 +07:00
hathach
275e834bbe
add device_os_none keil project for all boards
2013-12-27 13:40:59 +07:00
hathach
8de6ee22dc
move device app code
2013-12-24 16:15:18 +07:00
hathach
d020c2f609
remove immediately reset when device plug.
...
check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
2013-12-19 13:55:22 +07:00
hathach
cfcef0558a
fix plug & unplug issue by reseting port immediately instead of waiting for usbh enumeration task to do so
2013-12-19 12:43:22 +07:00
hathach
fce6252456
hub works with ohci as well. There is some problem when plug & unplug device hmm
2013-12-19 12:21:40 +07:00
hathach
2715650751
refractor ohci.c
2013-12-19 12:11:13 +07:00
hathach
cc736fd45e
able to run ohci hid mouse demo
...
- an old mouse cause double plug event
- an old mouse failed to response the first get 8 byte device descriptor
2013-12-19 11:59:19 +07:00
hathach
b828aabbe4
implement hcd_pipe_close, able to plug & unplug device from ohci lpc17xx
2013-12-18 16:23:09 +07:00
hathach
eaacbd4a36
able to run MSC host demo on lpc17xx
...
implement walk around for halted ED in OHCI
2013-12-18 14:57:34 +07:00
hathach
915296013e
add in hcd_pipe_open & hcd_pipe_xfer
2013-12-17 11:26:39 +07:00
hathach
75ffc0bfec
implement ohci
...
- hcd_port_reset
- hcd_port_connect_status
- hcd_port_speed_get
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- done_queue_isr for control xfer
able to go through enumeration with MSC device
2013-12-16 12:35:05 +07:00
hathach
736cbdc276
using PINSEL_ConfigPin for setting pinsel
2013-12-13 12:41:29 +07:00
hathach
30c8f68930
able to get connect status change interrupt occured
2013-12-13 12:26:37 +07:00
hathach
51b6c6ff41
implement inline bit manipulation function
2013-12-12 12:21:38 +07:00
hathach
4d14e2ac50
add structure & define for ohci
2013-12-11 14:31:27 +07:00
hathach
b35d2c8f43
add lpc17xx build config for host demo
2013-12-11 12:13:22 +07:00
hathach
8bd6440547
fix error in dcd_lpc175x_6x (still has problem with control transfer)
...
fix build error for host
start to add keil support for device
opt out pca9532.c when ea4357 is not the selected board
2013-12-11 11:31:09 +07:00
hathach
b35acbdcb2
add some doxygen
2013-12-10 10:57:59 +07:00
hathach
a40d20387d
complete dcd 17xx control xfer with soft DMA
...
keyboard LED set report run ok with lpc17xx
there is problem with cdc set line encoding
2013-12-09 16:11:10 +07:00
hathach
b08ecda657
house keeping, lpc43xx works okie
2013-12-09 11:57:09 +07:00
hathach
2af9ecbed5
refractor dcd lpc43xx control xfer (with int on complete)
2013-12-09 11:49:34 +07:00
hathach
055285c559
minor refractor
2013-12-09 11:28:11 +07:00
hathach
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
hathach
1ad78f104e
refractor hid device driver
2013-12-02 14:17:51 +07:00
hathach
2c8b8ea529
add board lpclink2, able to run device stack without any problems
2013-12-02 00:40:10 +07:00
hathach
4b78578266
fix potential wrong endpoint handle for stalling unsupported scsi command
2013-12-01 22:34:59 +07:00
hathach
24e92f79e7
adjust packet per TD for lpc13u is 1023, 11u is 64
2013-12-01 16:11:41 +07:00
hathach
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
hathach
edb4226f23
change class_ixr to class_cb
...
use IAD whenever enable CDC to make sure windows driver can detect
change keyboard, mouse send report to int_on_complete = true
2013-12-01 13:53:36 +07:00
hathach
d2f91af6b3
add some document for msc_device API
2013-12-01 12:18:26 +07:00
hathach
e0db04e6b4
tested with lpc13u
2013-12-01 00:34:18 +07:00
