andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
6,905 Commits 2 Branches 0 Tags
d5d1b43eb9d1a619b71879892ada7cb85ca3c00f
Commit Graph

1195 Commits

Author SHA1 Message Date
hathach
d407341d1e fix usb pin config with idf latest 2020-10-07 19:15:53 +07:00
Jean Gressmann
f92fe1e23e D5035-01: more natural Makefile variable use 2020-10-06 17:39:36 +02:00
Jean Gressmann
1730a5dcba D5035-01 bsp: fix paths, default to hw rev 1 (automated build) 2020-10-05 20:30:04 +02:00
Jean Gressmann
61aacf07d6 Adds files for the open source D5035-01 hardware 
The board's files are here:

	https://github.com/RudolphRiedel/USB_CAN-FD
 2020-10-05 18:35:35 +02:00
hathach
15ad585e67 replacing hcd_pipe_xfer by usbh_edpt_xfer 2020-09-06 11:49:00 +07:00
hathach
10d5dac913 update doc 2020-09-04 11:20:09 +07:00
hathach
4ecedc70c8 fix vector assign 2020-09-03 23:48:56 +07:00
hathach
1d83ad0ebb rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler 2020-09-03 13:12:25 +07:00
hathach
1cee2da7b9 revert to use __USE_LPCOPEN 
properly init fpu on LPC M4
 2020-09-03 12:58:09 +07:00
hathach
c7d2d0ae29 ohci work, tested with lpc1769 2020-09-02 01:40:04 +07:00
hathach
52b5748e8d fix ci build 2020-09-02 00:56:43 +07:00
hathach
c492aef4c7 revert to use float-abi 
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
 2020-09-02 00:46:08 +07:00
hathach
84425c50b3 add more logging to host stack 
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
 2020-09-01 19:16:50 +07:00
hathach
f4e3c6fd8e clean up 2020-09-01 17:12:31 +07:00
hathach
be708bb8a4 Merge branch 'master' into update-host 2020-09-01 12:02:25 +07:00
hathach
7a443d6bea add itsybitsy nrf52840 board support 2020-08-27 16:40:24 +07:00
hathach
9d3a9cf546 add OPT_MCU_SAMD11 
skip ci build for example that need more ROM/RAM could fit into SAMD11
 2020-08-22 18:46:19 +07:00
Katherine Temkin
91f7ce9769 add support for SAMD11 devices / add samd11_xplained board 2020-08-21 13:15:07 -06:00
hathach
76fe8ac612 fix samg55 ci build 2020-08-21 12:19:38 +07:00
hathach
0407cfe16c fix samd21 race condition with setup packet 
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
 2020-07-23 01:39:15 +07:00
Ha Thach
798fad397a Merge pull request #464 from hathach/improve-highspeed 
Better support highspeed mode
 2020-07-19 13:24:57 +07:00
hathach
dc00f0cae1 update link speed detection for nuc505 2020-07-16 20:44:06 +07:00
Kate Temkin
9181ce55fb add BSP for Great Scott Gadgets' LUNA boards (SAMD21) 2020-07-14 21:51:31 -06:00
hathach
0fd074afd8 change REDUCE_SPEED=0/1 to explicitly SPEED=high/full 
update readme, boards.md to add link to new stm boards
 2020-07-08 16:29:48 +07:00
Uwe Bonnes
8f433e67ac Add stm32l4r5nucleo. USB and UARTwork. 
USB runs from LSE stabilized MSI48
LPUART on PORTG needs VDDIO2 enabled.
 2020-07-03 16:34:08 +02:00
Uwe Bonnes
11c6d4cdae stlinkv3mini: Only OTG_HS has connector. 2020-07-03 10:59:02 +02:00
Uwe Bonnes
5c24d5ca72 stm32h745disco: HAL_PWREx_EnableUSBVoltageDetector() is needed for hot replug. 2020-07-03 10:53:51 +02:00
Uwe Bonnes
4b7539bd63 stm32h745disco: Only OTG_FS is available. Does not enumerate on replug yet. 2020-07-03 10:53:51 +02:00
Uwe Bonnes
fd38178189 STM32/OTG_HS: Allow OTG_HS port to run at FS speed. 
Add "REDUCE_SPEED=1" to the compile options.
 2020-07-03 10:52:57 +02:00
hathach
4cec866994 correct HSE_VALUE in hal_conf 
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
 2020-07-02 14:57:00 +07:00
hathach
9a290febcd change default port some stm bsp 
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
 2020-07-02 11:58:40 +07:00
hathach
c2289777f7 Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs 2020-07-01 23:53:33 +07:00
Uwe Bonnes
5b3a67a1e2 Add bsp for stlinkv3mini. 2020-07-01 15:42:53 +02:00
hathach
77315ba7ce added uart for h743 2020-07-01 18:27:48 +07:00
hathach
a512a31c9d Merge branch 'master' into add-stm-hs 2020-07-01 17:58:02 +07:00
Ha Thach
530b0099a5 Merge pull request #439 from UweBonnes/add-stm-hs 
Add stm hs
 2020-07-01 13:09:07 +07:00
hathach
463e978134 added DA14695 DK USB bsp 2020-07-01 12:47:14 +07:00
hathach
2f946e765d rename file 2020-07-01 12:42:12 +07:00
hathach
0477446224 more clean up 2020-06-30 16:31:59 +07:00
hathach
f3a88477dc revert rhport config in nxp mcus 2020-06-30 16:18:43 +07:00
Uwe Bonnes
30a18e2605 stm32f723disco: USB HS enumerates. 2020-06-30 11:07:53 +02:00
Uwe Bonnes
f6660c39a1 Add Stm32F7xxdisco board support files 
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco        => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco        => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco        => Hangs during enumeration
 2020-06-30 11:02:38 +02:00
Uwe Bonnes
4b7f848e1f stm32h743nucleo: Enable Log via STLINK-VCP. 2020-06-30 11:01:44 +02:00
hathach
ab75998316 Merge branch 'master' into add-stm-hs 2020-06-30 01:55:57 +07:00
Ha Thach
05996aee64 Merge pull request #427 from kasjer/kasjer/add-da1469x-support 
Support for DA1469x MCU from Dialog Semiconductor
 2020-06-30 01:20:56 +07:00
hathach
2dff40236c add kaluga files 2020-06-29 18:40:23 +07:00
hathach
50b569ad1b added esp32s2 kaluga bsp 2020-06-29 16:52:08 +07:00
Jerzy Kasenberg
8e143fc962 Add board support for Dialog DA1469x-dk-pro 
This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board.
Source files .c .S and .ld are taken from Apache Mynewt repository.
Those files were stripped to allow starting board without Mynewt os.
 2020-06-29 11:02:32 +02:00
hathach
667eaa6dd6 fix stm32h743 priority with freeRTOS 2020-06-16 00:03:52 +07:00
hathach
0bfa839ac0 clean up, update other example config 2020-06-15 23:06:17 +07:00