/***********************************************************************************************************************
 * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
 * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
 **********************************************************************************************************************/

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v13.1
processor: MIMXRT1062xxxxA
package_id: MIMXRT1062DVL6A
mcu_data: ksdk2_0
processor_version: 13.0.2
board: MIMXRT1060-EVK
pin_labels:
- {pin_num: E7, pin_signal: GPIO_B0_01, label: LCDIF_ENABLE, identifier: USER_BUTTON}
- {pin_num: D8, pin_signal: GPIO_B0_03, label: LCDIF_VSYNC, identifier: USER_LED}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "fsl_gpio.h"
#include "pin_mux.h"

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitBootPins
 * Description   : Calls initialization functions.
 *
 * END ****************************************************************************************************************/
void BOARD_InitBootPins(void) {
    BOARD_InitPins();
    BOARD_InitDEBUG_UARTPins();
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: D8, peripheral: GPIO2, signal: 'gpio_io, 03', pin_signal: GPIO_B0_03, direction: OUTPUT}
  - {pin_num: E7, peripheral: GPIO2, signal: 'gpio_io, 01', pin_signal: GPIO_B0_01, direction: INPUT, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);

  /* GPIO configuration of USER_BUTTON on GPIO_B0_01 (pin E7) */
  gpio_pin_config_t USER_BUTTON_config = {
      .direction = kGPIO_DigitalInput,
      .outputLogic = 0U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_B0_01 (pin E7) */
  GPIO_PinInit(GPIO2, 1U, &USER_BUTTON_config);

  /* GPIO configuration of USER_LED on GPIO_B0_03 (pin D8) */
  gpio_pin_config_t USER_LED_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 0U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_B0_03 (pin D8) */
  GPIO_PinInit(GPIO2, 3U, &USER_LED_config);

  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_GPIO2_IO03, 0U);
  IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 &
    (~(BOARD_INITPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK)))
      | IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U)
    );
  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0xB0B0U);
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitDEBUG_UARTPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
  - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitDEBUG_UARTPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitDEBUG_UARTPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);

  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U);
  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U);
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitUSDHCPins:
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
  - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
  - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
  - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
  - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
  - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
  - {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitUSDHCPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitUSDHCPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);

  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitQSPIPins:
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
  - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
  - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
  - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
  - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
  - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
  - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitQSPIPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitQSPIPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);

  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U);
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U);
}

/***********************************************************************************************************************
 * EOF
 **********************************************************************************************************************/