/*********************************************************************
*
*       OnProjectLoad
*
* Function description
*   Project load routine. Required.
*
**********************************************************************
*/
void OnProjectLoad (void) {
  Project.AddSvdFile ("Cortex-M33.svd");
  Project.AddSvdFile ("./R7FA6M5BH.svd");

  Project.SetDevice ("R7FA6M5BH");
  Project.SetHostIF ("USB", "");
  Project.SetTargetIF ("SWD");
  Project.SetTIFSpeed ("50 MHz");

  Project.SetTraceSource ("Trace Pins");
  Project.SetTracePortWidth (4);

  //File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf");
  //File.Open ("../../../../../../examples/dual/cmake-build-ra6m5/host_hid_to_device_cdc/host_hid_to_device_cdc.elf");
  File.Open ("../../../../../../examples/cmake-build-ra6m5/host/cdc_msc_hid/cdc_msc_hid.elf");
}
/*********************************************************************
*
*       BeforeTargetConnect
*
**********************************************************************
*/
void BeforeTargetConnect (void) {
  // Trace pin init is done by J-Link script file as J-Link script files are IDE independent
	Project.SetJLinkScript("../../../debug.jlinkscript");
}

/*********************************************************************
*
*       AfterTargetReset
*
* Function description
*   Event handler routine.
*    - Sets the PC register to program reset value.
*    - Sets the SP register to program reset value on Cortex-M.
*
**********************************************************************
*/
void AfterTargetReset (void) {
  unsigned int SP;
  unsigned int PC;
  unsigned int VectorTableAddr;

  VectorTableAddr = Elf.GetBaseAddr();

  if (VectorTableAddr != 0xFFFFFFFF) {
    SP = Target.ReadU32(VectorTableAddr);
    Target.SetReg("SP", SP);
  } else {
    Util.Log("Project file error: failed to get program base");
  }

  PC = Elf.GetEntryPointPC();

  if (PC != 0xFFFFFFFF) {
    Target.SetReg("PC", PC);
  } else if (VectorTableAddr != 0xFFFFFFFF) {
    PC = Target.ReadU32(VectorTableAddr + 4);
    Target.SetReg("PC", PC);
  }
}

/*********************************************************************
*
*      AfterTargetDownload
*
* Function description
*   Event handler routine.
*    - Sets the PC register to program reset value.
*    - Sets the SP register to program reset value on Cortex-M.
*
**********************************************************************
*/
void AfterTargetDownload (void) {
  unsigned int SP;
  unsigned int PC;
  unsigned int VectorTableAddr;

  VectorTableAddr = Elf.GetBaseAddr();

  if (VectorTableAddr != 0xFFFFFFFF) {
    SP = Target.ReadU32(VectorTableAddr);
    Target.SetReg("SP", SP);
  } else {
    Util.Log("Project file error: failed to get program base");
  }

  PC = Elf.GetEntryPointPC();

  if (PC != 0xFFFFFFFF) {
    Target.SetReg("PC", PC);
  } else if (VectorTableAddr != 0xFFFFFFFF) {
    PC = Target.ReadU32(VectorTableAddr + 4);
    Target.SetReg("PC", PC);
  }
}