/*
 * The MIT License (MIT)
 *
 * Copyright (c) 2024 Ha Thach (tinyusb.org)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 * This file is part of the TinyUSB stack.
 */

#include "tusb_option.h"

#if CFG_TUH_ENABLED && defined(TUP_USBIP_DWC2)

// Debug level for DWC2
#define DWC2_DEBUG    2

#include "host/hcd.h"
#include "dwc2_common.h"

//--------------------------------------------------------------------+
// Controller API
//--------------------------------------------------------------------+

// optional hcd configuration, called by tuh_configure()
bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) {
  (void) rhport;
  (void) cfg_id;
  (void) cfg_param;

  return false;
}

// Initialize controller to host mode
bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) {
  (void) rhport;
  (void) rh_init;
  return false;
}

// Interrupt Handler
void hcd_int_handler(uint8_t rhport, bool in_isr) {
  (void) rhport;
  (void) in_isr;
}

// Enable USB interrupt
void hcd_int_enable (uint8_t rhport) {
  (void) rhport;
}

// Disable USB interrupt
void hcd_int_disable(uint8_t rhport) {
  (void) rhport;
}

// Get frame number (1ms)
uint32_t hcd_frame_number(uint8_t rhport) {
  (void) rhport;

  return 0;
}

//--------------------------------------------------------------------+
// Port API
//--------------------------------------------------------------------+

// Get the current connect status of roothub port
bool hcd_port_connect_status(uint8_t rhport) {
  (void) rhport;

  return false;
}

// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete.
// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence.
void hcd_port_reset(uint8_t rhport) {
  (void) rhport;
}

// Complete bus reset sequence, may be required by some controllers
void hcd_port_reset_end(uint8_t rhport) {
  (void) rhport;
}

// Get port link speed
tusb_speed_t hcd_port_speed_get(uint8_t rhport) {
  (void) rhport;

  return TUSB_SPEED_FULL;
}

// HCD closes all opened endpoints belong to this device
void hcd_device_close(uint8_t rhport, uint8_t dev_addr) {
  (void) rhport;
  (void) dev_addr;
}

//--------------------------------------------------------------------+
// Endpoints API
//--------------------------------------------------------------------+

// Open an endpoint
bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) {
  (void) rhport;
  (void) dev_addr;
  (void) ep_desc;

  return false;
}

// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked
bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) {
  (void) rhport;
  (void) dev_addr;
  (void) ep_addr;
  (void) buffer;
  (void) buflen;

  return false;
}

// Abort a queued transfer. Note: it can only abort transfer that has not been started
// Return true if a queued transfer is aborted, false if there is no transfer to abort
bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
  (void) rhport;
  (void) dev_addr;
  (void) ep_addr;

  return false;
}

// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked
bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) {
  (void) rhport;
  (void) dev_addr;
  (void) setup_packet;

  return false;
}

// clear stall, data toggle is also reset to DATA0
bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
  (void) rhport;
  (void) dev_addr;
  (void) ep_addr;

  return false;
}

#endif