189 lines
8.0 KiB
C
189 lines
8.0 KiB
C
/*
|
|
* @brief Error code returned by Boot ROM drivers/library functions
|
|
* @ingroup Common
|
|
*
|
|
* This file contains unified error codes to be used across driver,
|
|
* middleware, applications, hal and demo software.
|
|
*
|
|
*
|
|
* @note
|
|
* Copyright(C) NXP Semiconductors, 2012
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Software that is described herein is for illustrative purposes only
|
|
* which provides customers with programming information regarding the
|
|
* LPC products. This software is supplied "AS IS" without any warranties of
|
|
* any kind, and NXP Semiconductors and its licensor disclaim any and
|
|
* all warranties, express or implied, including all implied warranties of
|
|
* merchantability, fitness for a particular purpose and non-infringement of
|
|
* intellectual property rights. NXP Semiconductors assumes no responsibility
|
|
* or liability for the use of the software, conveys no license or rights under any
|
|
* patent, copyright, mask work right, or any other intellectual property rights in
|
|
* or to any products. NXP Semiconductors reserves the right to make changes
|
|
* in the software without notification. NXP Semiconductors also makes no
|
|
* representation or warranty that such application will be suitable for the
|
|
* specified use without further testing or modification.
|
|
*
|
|
* @par
|
|
* Permission to use, copy, modify, and distribute this software and its
|
|
* documentation is hereby granted, under NXP Semiconductors' and its
|
|
* licensor's relevant copyrights in the software, without fee, provided that it
|
|
* is used in conjunction with NXP Semiconductors microcontrollers. This
|
|
* copyright, permission, and disclaimer notice must appear in all copies of
|
|
* this code.
|
|
*/
|
|
|
|
#ifndef __LPC_ERROR_H__
|
|
#define __LPC_ERROR_H__
|
|
|
|
/** Error code returned by Boot ROM drivers/library functions
|
|
*
|
|
* Error codes are a 32-bit value with :
|
|
* - The 16 MSB contains the peripheral code number
|
|
* - The 16 LSB contains an error code number associated to that peripheral
|
|
*
|
|
*/
|
|
typedef enum {
|
|
/**\b 0x00000000*/ LPC_OK = 0, /**< enum value returned on Success */
|
|
/**\b 0xFFFFFFFF*/ ERR_FAILED = -1, /**< enum value returned on general failure */
|
|
/**\b 0xFFFFFFFE*/ ERR_TIME_OUT = -2, /**< enum value returned on general timeout */
|
|
/**\b 0xFFFFFFFD*/ ERR_BUSY = -3, /**< enum value returned when resource is busy */
|
|
|
|
/* ISP related errors */
|
|
ERR_ISP_BASE = 0x00000000,
|
|
/*0x00000001*/ ERR_ISP_INVALID_COMMAND = ERR_ISP_BASE + 1,
|
|
/*0x00000002*/ ERR_ISP_SRC_ADDR_ERROR, /* Source address not on word boundary */
|
|
/*0x00000003*/ ERR_ISP_DST_ADDR_ERROR, /* Destination address not on word or 256 byte boundary */
|
|
/*0x00000004*/ ERR_ISP_SRC_ADDR_NOT_MAPPED,
|
|
/*0x00000005*/ ERR_ISP_DST_ADDR_NOT_MAPPED,
|
|
/*0x00000006*/ ERR_ISP_COUNT_ERROR, /* Byte count is not multiple of 4 or is not a permitted value */
|
|
/*0x00000007*/ ERR_ISP_INVALID_SECTOR,
|
|
/*0x00000008*/ ERR_ISP_SECTOR_NOT_BLANK,
|
|
/*0x00000009*/ ERR_ISP_SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION,
|
|
/*0x0000000A*/ ERR_ISP_COMPARE_ERROR,
|
|
/*0x0000000B*/ ERR_ISP_BUSY,/* Flash programming hardware interface is busy */
|
|
/*0x0000000C*/ ERR_ISP_PARAM_ERROR, /* Insufficient number of parameters */
|
|
/*0x0000000D*/ ERR_ISP_ADDR_ERROR, /* Address not on word boundary */
|
|
/*0x0000000E*/ ERR_ISP_ADDR_NOT_MAPPED,
|
|
/*0x0000000F*/ ERR_ISP_CMD_LOCKED, /* Command is locked */
|
|
/*0x00000010*/ ERR_ISP_INVALID_CODE,/* Unlock code is invalid */
|
|
/*0x00000011*/ ERR_ISP_INVALID_BAUD_RATE,
|
|
/*0x00000012*/ ERR_ISP_INVALID_STOP_BIT,
|
|
/*0x00000013*/ ERR_ISP_CODE_READ_PROTECTION_ENABLED,
|
|
|
|
/* ROM API related errors */
|
|
ERR_API_BASE = 0x00010000,
|
|
/**\b 0x00010001*/ ERR_API_INVALID_PARAMS = ERR_API_BASE + 1, /**< Invalid parameters*/
|
|
/**\b 0x00010002*/ ERR_API_INVALID_PARAM1, /**< PARAM1 is invalid */
|
|
/**\b 0x00010003*/ ERR_API_INVALID_PARAM2, /**< PARAM2 is invalid */
|
|
/**\b 0x00010004*/ ERR_API_INVALID_PARAM3, /**< PARAM3 is invalid */
|
|
/**\b 0x00010005*/ ERR_API_MOD_INIT,/**< API is called before module init */
|
|
|
|
/* SPIFI API related errors */
|
|
ERR_SPIFI_BASE = 0x00020000,
|
|
/*0x00020001*/ ERR_SPIFI_DEVICE_ERROR = ERR_SPIFI_BASE + 1,
|
|
/*0x00020002*/ ERR_SPIFI_INTERNAL_ERROR,
|
|
/*0x00020003*/ ERR_SPIFI_TIMEOUT,
|
|
/*0x00020004*/ ERR_SPIFI_OPERAND_ERROR,
|
|
/*0x00020005*/ ERR_SPIFI_STATUS_PROBLEM,
|
|
/*0x00020006*/ ERR_SPIFI_UNKNOWN_EXT,
|
|
/*0x00020007*/ ERR_SPIFI_UNKNOWN_ID,
|
|
/*0x00020008*/ ERR_SPIFI_UNKNOWN_TYPE,
|
|
/*0x00020009*/ ERR_SPIFI_UNKNOWN_MFG,
|
|
|
|
/* Security API related errors */
|
|
ERR_SEC_BASE = 0x00030000,
|
|
/*0x00030001*/ ERR_SEC_AES_WRONG_CMD = ERR_SEC_BASE + 1,
|
|
/*0x00030002*/ ERR_SEC_AES_NOT_SUPPORTED,
|
|
/*0x00030003*/ ERR_SEC_AES_KEY_ALREADY_PROGRAMMED,
|
|
|
|
/* USB device stack related errors */
|
|
ERR_USBD_BASE = 0x00040000,
|
|
/**\b 0x00040001*/ ERR_USBD_INVALID_REQ = ERR_USBD_BASE + 1,/**< invalid request */
|
|
/**\b 0x00040002*/ ERR_USBD_UNHANDLED, /**< Callback did not process the event */
|
|
/**\b 0x00040003*/ ERR_USBD_STALL, /**< Stall the endpoint on which the call back is called */
|
|
/**\b 0x00040004*/ ERR_USBD_SEND_ZLP, /**< Send ZLP packet on the endpoint on which the call back is called */
|
|
/**\b 0x00040005*/ ERR_USBD_SEND_DATA, /**< Send data packet on the endpoint on which the call back is called */
|
|
/**\b 0x00040006*/ ERR_USBD_BAD_DESC, /**< Bad descriptor*/
|
|
/**\b 0x00040007*/ ERR_USBD_BAD_CFG_DESC, /**< Bad config descriptor*/
|
|
/**\b 0x00040008*/ ERR_USBD_BAD_INTF_DESC, /**< Bad interface descriptor*/
|
|
/**\b 0x00040009*/ ERR_USBD_BAD_EP_DESC,/**< Bad endpoint descriptor*/
|
|
/**\b 0x0004000a*/ ERR_USBD_BAD_MEM_BUF,/**< Bad alignment of buffer passed. */
|
|
/**\b 0x0004000b*/ ERR_USBD_TOO_MANY_CLASS_HDLR,/**< Too many class handlers. */
|
|
|
|
/* CGU related errors */
|
|
ERR_CGU_BASE = 0x00050000,
|
|
/*0x00050001*/ ERR_CGU_NOT_IMPL = ERR_CGU_BASE + 1,
|
|
/*0x00050002*/ ERR_CGU_INVALID_PARAM,
|
|
/*0x00050003*/ ERR_CGU_INVALID_SLICE,
|
|
/*0x00050004*/ ERR_CGU_OUTPUT_GEN,
|
|
/*0x00050005*/ ERR_CGU_DIV_SRC,
|
|
/*0x00050006*/ ERR_CGU_DIV_VAL,
|
|
/*0x00050007*/ ERR_CGU_SRC,
|
|
|
|
/* I2C related errors */
|
|
ERR_I2C_BASE = 0x00060000,
|
|
/*0x00060001*/ ERR_I2C_NAK = ERR_I2C_BASE + 1,
|
|
/*0x00060002*/ ERR_I2C_BUFFER_OVERFLOW,
|
|
/*0x00060003*/ ERR_I2C_BYTE_COUNT_ERR,
|
|
/*0x00060004*/ ERR_I2C_LOSS_OF_ARBRITRATION,
|
|
/*0x00060005*/ ERR_I2C_SLAVE_NOT_ADDRESSED,
|
|
/*0x00060006*/ ERR_I2C_LOSS_OF_ARBRITRATION_NAK_BIT,
|
|
/*0x00060007*/ ERR_I2C_GENERAL_FAILURE,
|
|
/*0x00060008*/ ERR_I2C_REGS_SET_TO_DEFAULT,
|
|
/*0x00060009*/ ERR_I2C_TIMEOUT,
|
|
/*0x0006000A*/ ERR_I2C_BUFFER_UNDERFLOW,
|
|
/*0x0006000B*/ ERR_I2C_UNKNOWN_MODE,
|
|
/*0x0006000C*/ ERR_I2C_PARAM,
|
|
/*0x0006000D*/ ERR_I2C_DMA_SETUP,
|
|
/*0x0006000E*/ ERR_I2C_BUS_ERROR,
|
|
|
|
/* UART related errors */
|
|
ERR_UART_BASE = 0x00080000,
|
|
/**\b 0x00080001*/ ERR_UART_RXD_BUSY = ERR_UART_BASE + 1, /*!< Receive is busy */
|
|
/**\b 0x00080002*/ ERR_UART_TXD_BUSY, /*!< Transmit is busy */
|
|
/**\b 0x00080003*/ ERR_UART_OVERRUN_FRAME_PARITY_NOISE, /*!< Overrun, Frame, Parity , Receive Noise error */
|
|
/**\b 0x00080004*/ ERR_UART_UNDERRUN, /*!< Underrun */
|
|
/**\b 0x00080005*/ ERR_UART_PARAM, /*!< Parameter error */
|
|
|
|
ERR_DMA_BASE = 0x000D0000,
|
|
/*0x000D0001*/ ERR_DMA_ERROR_INT = ERR_DMA_BASE + 1,
|
|
/*0x000D0002*/ ERR_DMA_CHANNEL_NUMBER,
|
|
/*0x000D0003*/ ERR_DMA_CHANNEL_DISABLED,
|
|
/*0x000D0004*/ ERR_DMA_BUSY,
|
|
/*0x000D0005*/ ERR_DMA_NOT_ALIGNMENT,
|
|
/*0x000D0006*/ ERR_DMA_PING_PONG_EN,
|
|
/*0x000D0007*/ ERR_DMA_CHANNEL_VALID_PENDING,
|
|
|
|
/* SPI related errors */
|
|
ERR_SPI_BASE = 0x000E0000,
|
|
/*0x000E0001*/ ERR_SPI_RXOVERRUN=ERR_SPI_BASE+1,
|
|
/*0x000E0002*/ ERR_SPI_TXUNDERRUN,
|
|
/*0x000E0003*/ ERR_SPI_SELNASSERT,
|
|
/*0x000E0004*/ ERR_SPI_SELNDEASSERT,
|
|
/*0x000E0005*/ ERR_SPI_CLKSTALL,
|
|
/*0x000E0006*/ ERR_SPI_PARAM,
|
|
/*0x000E0007*/ ERR_SPI_INVALID_LENGTH,
|
|
|
|
/* ADC related errors */
|
|
ERR_ADC_BASE = 0x000F0000,
|
|
/*0x000F0001*/ ERR_ADC_OVERRUN = ERR_ADC_BASE + 1,
|
|
/*0x000F0002*/ ERR_ADC_INVALID_CHANNEL,
|
|
/*0x000F0003*/ ERR_ADC_INVALID_SEQUENCE,
|
|
/*0x000F0004*/ ERR_ADC_INVALID_SETUP,
|
|
/*0x000F0005*/ ERR_ADC_PARAM,
|
|
/*0x000F0006*/ ERR_ADC_INVALID_LENGTH,
|
|
/*0x000F0007*/ ERR_ADC_NO_POWER
|
|
} ErrorCode_t;
|
|
|
|
#ifndef offsetof
|
|
#define offsetof(s, m) (int) &(((s *) 0)->m)
|
|
#endif
|
|
|
|
#define COMPILE_TIME_ASSERT(pred) switch (0) { \
|
|
case 0: \
|
|
case pred:; }
|
|
|
|
#endif /* __LPC_ERROR_H__ */
|