799 lines
25 KiB
ReStructuredText
799 lines
25 KiB
ReStructuredText
*********
|
|
Changelog
|
|
*********
|
|
|
|
0.15.0
|
|
======
|
|
|
|
- Add codespell to detect typo
|
|
- Add support for fuzzing and bagde for oss-fuzz
|
|
- [osal]
|
|
|
|
- Allow the use of non-static allocation for FreeRTOS
|
|
- Fix FreeRTOS wrong task switch in some cases
|
|
|
|
- Fix tu_fifo memory overflown when repeatedly write to overwritable fifo (accumulated more than 2 depths)
|
|
- Better support for IAR (ARM) with ci build check for stm32 mcus.
|
|
- Fix Windows build for some mingw gnu make situations
|
|
|
|
Controller Driver (DCD & HCD)
|
|
-----------------------------
|
|
|
|
- Add new port support (WIP) for WCH CH32V307 USB Highspeed
|
|
- Add new port support (WIP) for PIC32MM/MX & PIC24
|
|
|
|
- [nRF]
|
|
|
|
- Fix endpoint internal state when closed
|
|
- Fix reception of large ISO packets
|
|
|
|
- [rp2040]
|
|
|
|
- [dcd] Implement workaround for Errata 15. This enable SOF when bulk-in endpoint is in use and reduce its bandwidth to only 80%
|
|
- [hcd] Fix shared irq slots filling up when hcd_init() is called multiple times
|
|
- [hcd] Support host bulk endpoint using hw "interrupt" endpoint. Note speed limit is 64KB/s
|
|
|
|
- [samd][dcd] Add support for ISO endpoint
|
|
- [dwc2][dcd] Add support for stm32u5xx
|
|
- [esp32sx] Fix Isochronous transfers only transmitted on even frame
|
|
- [lpc_ip3511][dcd] Add isochronous support and fix endpoint accidental write
|
|
- [ft90x] Improve and enhance support for FT9xx MCU, tested with more examples
|
|
|
|
Device Stack
|
|
------------
|
|
|
|
- [Video]
|
|
|
|
- Add support for MJPEG
|
|
- Fix probe on macOS
|
|
|
|
- [MIDI]
|
|
|
|
- Support port name strings
|
|
- fix MS Header wTotalLength computation
|
|
|
|
- [HID]
|
|
|
|
- Add FIDO descriptor template
|
|
- change length in tud_hid_report_complete_cb() from uint8 to uint16
|
|
|
|
- [CDC]
|
|
|
|
- Fix autoflush for FIFO < MPS
|
|
- Fix tx fifo memory overflown when DTR is not set and tud_cdc_write() is called repeatedly with large enough data
|
|
|
|
- [USBTMC] Fix packet size with highspeed
|
|
|
|
Host Stack
|
|
----------
|
|
|
|
- Retry a few times with transfers in enumeration since device can be unstable when starting up
|
|
- [MSC] Rework host masstorage API. Add new **host/msc_file_explorer** example
|
|
- [CDC]
|
|
|
|
- Add support for host cdc
|
|
- Fix host cdc with device without IAD e.g Arduino Due
|
|
|
|
0.14.0
|
|
======
|
|
|
|
- Improve compiler support for CCRX and IAR
|
|
- Add timeout to osal_queue_receive()
|
|
- Add tud_task_ext(timeout, in_isr) as generic version of tud_task(). Same as tuh_task_ext(), tuh_task()
|
|
- Enable more warnings -Wnull-dereference -Wuninitialized -Wunused -Wredundant-decls -Wconversion
|
|
- Add new examples
|
|
|
|
- host/bare_api to demonstrate generic (app-level) enumeration and endpoint transfer
|
|
- dual/host_hid_to_device_cdc to run both device and host stack concurrently, get HID report from host and print out to device CDC. This example only work with multiple-controller MCUs and rp2040 with the help of pio-usb as added controller.
|
|
|
|
Controller Driver (DCD & HCD)
|
|
-----------------------------
|
|
|
|
- Enhance rhports management to better support dual roles
|
|
|
|
- CFG_TUD_ENABLED/CFG_TUH_ENABLED, CFG_TUD_MAX_SPEED/CFG_TUH_MAX_SPEED can be used to replace CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE
|
|
- tud_init(rphort), tuh_init(rhport) can be used to init stack on specified roothub port (controller) instead of tusb_init(void)
|
|
- Add dcd/hcd port specific defines TUP_ (stand for tinyusb port-specific)
|
|
- [dwc2]
|
|
|
|
- Update to support stm32 h72x, h73x with only 1 otg controller
|
|
- Fix overwrite with grstctl when disable endpoint
|
|
- [EHCI] Fix an issue with EHCI driver
|
|
- [msp430] Fix for possible bug in msp430-elf-gcc 9.3.0
|
|
- [nrf5x] Fix DMA access race condition using atomic function
|
|
- [pic32] Fix PIC32 santiy
|
|
- [rp2040]
|
|
|
|
- Add PICO-PIO-USB as controller (device/host) support for rp2040
|
|
- Use shared IRQ handlers, so user can also hook the USB IRQ
|
|
- Fix resumed signal not reported to device stack
|
|
- [stm32fsdev] Add support for stm32wb55
|
|
|
|
Device Stack
|
|
------------
|
|
|
|
- [Audio] Add support for feedback endpoint computation
|
|
|
|
- New API tud_audio_feedback_params_cb(), tud_audio_feedback_interval_isr().
|
|
- Supported computation method are: frequency with fixed/float or power of 2. Feedback with fifo count is not yet supported.
|
|
- Fix nitfs (should be 3) in TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR
|
|
- Fix typo in audiod_rx_done_cb()
|
|
|
|
- [DFU] Fix coexistence with other interfaces BTH, RNDIS
|
|
- [MSC] Fix inquiry response additional length field
|
|
- [Venndor] Improve write performance
|
|
|
|
Host Stack
|
|
----------
|
|
|
|
- Add new API tuh_configure(rhport, cfg_id, cfg_param) for dynamnic port specific behavior configuration
|
|
- [HID] Open OUT endpoint if available
|
|
- [Hub] hub clear port and device interrupts
|
|
- [USBH] Major improvement
|
|
|
|
- Rework usbh control transfer with complete callback. New API tuh_control_xfer() though still only carry 1 usbh (no queueing) at a time.
|
|
- Add generic endpoint transfer with tuh_edpt_open(), tuh_edpt_xfer(). Require `CFG_TUH_API_EDPT_XFER=1`
|
|
- Support app-level enumeration with new APIs
|
|
|
|
- tuh_descriptor_get(), tuh_descriptor_get_device(), tuh_descriptor_get_configuration(), tuh_descriptor_get_hid_report()
|
|
- tuh_descriptor_get_string(), tuh_descriptor_get_manufacturer_string(), tuh_descriptor_get_product_string(), tuh_descriptor_get_serial_string()
|
|
- Also add _sync() as sync/blocking version for above APIs
|
|
|
|
0.13.0
|
|
======
|
|
|
|
- [tu_fifo] Fix locked mutex when full, and return type in peek_n()
|
|
|
|
Controller Driver (DCD & HCD)
|
|
-----------------------------
|
|
|
|
- [DWC2] Generalize synopsys dwc2 with synopsys/dwc2 which support both FS and HS phy (UTMI and ULPI) for various MCUs.
|
|
- Broadcom 28/27xx on raspberrypi SBC
|
|
- Silicon Labs EFM32
|
|
- Espressif ESP32 Sx
|
|
- GigaDevice GD32
|
|
- ST STM32
|
|
- Infineon XMC
|
|
- [KL25] Add new HCD for NXP KL25
|
|
- [MUSB] Add new DCD and HCD for Mentor musb with TI MSP432E4
|
|
- [F1C100s] Add new DCD for Allwinner F1C100s family
|
|
- [PIC32MZ] Add new DCD for PIC32MZ
|
|
- [nRF] Fix/Enhance various race condition with: EASY DMA, request HFXO, EPOUT
|
|
- [ChipIdea] rename Transdimension to more popular ChipIdea Highspeed,
|
|
- [RP2040] various update/fix for hcd/dcd
|
|
- [FT9XX] new DCD port for Bridgetek FT90x and FT93x devices
|
|
- [DA1469X] Fix resume
|
|
- [OHCI] Fix device array out of bound
|
|
|
|
Note: legacy drivers such as st/synopsys, nxp/transdimension are still present in this release but won't receive more update and could be removed in the future.
|
|
|
|
Device Stack
|
|
------------
|
|
|
|
- [Audio] Support disabling feedback format correction (16.16 <-> 10.14 format)
|
|
- [MSC] Add tud_msc_request_sense_cb() callback, change most default sense error to medium not present (0x02, 0x3A, 0x00)
|
|
- [Video] Fix video_capture example fails enumeration when 8FPS
|
|
|
|
Host Stack
|
|
----------
|
|
|
|
No notable changes
|
|
|
|
0.12.0
|
|
======
|
|
|
|
- add CFG_TUSB_OS_INC_PATH for os include path
|
|
|
|
Device Controller Driver (DCD)
|
|
------------------------------
|
|
|
|
- Getting device stack to pass USB Compliance Verification test (chapter9, HID, MSC). Ports are tested:
|
|
nRF, SAMD 21/51, rp2040, stm32f4, Renesas RX, iMXRT, ESP32-S2/3, Kinetic KL25/32, DA146xx
|
|
- Added dcd_edpt_close_all() for switching configuration
|
|
- [Transdimension] Support dcd_edpt_xfer_fifo() with auto wrap over if fifo buffer is 4K aligned and size is multiple of 4K.
|
|
- [DA146xx] Improve vbus, reset, suspend, resume detection, and remote wakeup.
|
|
|
|
Device Stack
|
|
------------
|
|
|
|
- Add new network driver Network Control Model (CDC-NCM), update net_lwip_webserver to work with NCM (need re-configure example)
|
|
- Add new USB Video Class UVC 1.5 driver and video_capture example ((work in progress)
|
|
- Fix potential buffer overflow for HID, bluetooth drivers
|
|
|
|
Host Controller Driver (HCD)
|
|
----------------------------
|
|
|
|
No notable changes
|
|
|
|
Host Stack
|
|
----------
|
|
|
|
No notable changes
|
|
|
|
0.11.0 (2021-08-29)
|
|
===================
|
|
|
|
- Add host/hid_controller example: only worked/tested with Sony PS4 DualShock controller
|
|
- Add device/hid_boot_interface example
|
|
- Add support for Renesas CCRX toolchain for RX mcu
|
|
|
|
Device Controller Driver (DCD)
|
|
------------------------------
|
|
|
|
- Add new DCD port for SAMx7x (E70, S70, V70, V71)
|
|
- Add new mcu K32L2Bxx
|
|
- Add new mcu GD32VF103
|
|
- Add new mcu STM32l151
|
|
- Add new mcu SAML21
|
|
- Add new mcu RX65n RX72n
|
|
- Fix NUC120/121/126 USBRAM can only be accessed in byte manner. Also improve set_address & disable sof
|
|
- Add Suspend/Resume handling for Renesas RX family.
|
|
- Fix DA1469x no VBUS startup
|
|
|
|
Synopsys
|
|
^^^^^^^^
|
|
|
|
- Fix Synopsys set address bug which could cause re-enumeration failed
|
|
- Fix dcd_synopsys driver integer overflow in HS mode (issue #968)
|
|
|
|
nRF5x
|
|
^^^^^
|
|
|
|
- Add nRF5x suspend, resume and remote wakeup
|
|
- Fix nRF5x race condition with TASKS_EP0RCVOUT
|
|
|
|
RP2040
|
|
^^^^^^
|
|
|
|
- Add RP2040 suspend & resume support
|
|
- Implement double buffer for both host and device (#891). However device EPOUT is still single buffered due to techinical issue with short packet
|
|
|
|
Device Stack
|
|
------------
|
|
|
|
USBD
|
|
^^^^
|
|
|
|
- Better support big endian mcu
|
|
- Add tuh_inited() and tud_inited(), will separate tusb_init/inited() to tud/tuh init/inited
|
|
- Add dcd_attr.h for defining common controller attribute such as max endpoints
|
|
|
|
Bluetooth
|
|
^^^^^^^^^
|
|
|
|
- Fix stridx error in descriptor template
|
|
|
|
DFU
|
|
^^^
|
|
|
|
- Enhance DFU implementation to support multiple alternate interface and better support bwPollTimeout
|
|
- Rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU
|
|
|
|
HID
|
|
^^^
|
|
|
|
- Fix newline usage keyboard (ENTER 0x28)
|
|
- Better support Hid Get/Set report
|
|
- Change max gamepad support from 16 to 32 buttons
|
|
|
|
MIDI
|
|
^^^^
|
|
|
|
- Fix midi available
|
|
- Fix midi data
|
|
- Fix an issue when calling midi API when not enumerated yet
|
|
|
|
UAC2
|
|
^^^^
|
|
|
|
- Fix bug and enhance of UAC2
|
|
|
|
Vendor
|
|
^^^^^^
|
|
|
|
- Fix vendor fifo deadlock in certain case
|
|
- Add tud_vendor_n_read_flush
|
|
|
|
Host Controller Driver (HCD)
|
|
----------------------------
|
|
|
|
RP2040
|
|
^^^^^^
|
|
|
|
- Implement double buffered to fix E4 errata and boost performance
|
|
- Lots of rp2040 update and enhancement
|
|
|
|
Host Stack
|
|
----------
|
|
|
|
- Major update and rework most of host stack, still needs more improvement
|
|
- Lots of improvement and update in parsing configuration and control
|
|
- Rework and major update to HID driver. Will default to enable boot interface if available
|
|
- Separate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB for better management and reduce SRAM usage
|
|
|
|
0.10.1 (2021-06-03)
|
|
===================
|
|
|
|
- rework rp2040 examples and CMake build, allow better integration with pico-sdk
|
|
|
|
Host Controller Driver (HCD)
|
|
----------------------------
|
|
|
|
- Fix rp2040 host driver: incorrect PID with low speed device with max packet size of 8 bytes
|
|
- Improve hub driver
|
|
- Remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer()
|
|
- Use hcd_frame_number() instead of micro frame
|
|
- Fix OHCI endpoint address and xferred_bytes in xfer complete event
|
|
|
|
0.10.0 (2021-05-28)
|
|
===================
|
|
|
|
- Rework tu_fifo_t with separated mutex for read and write, better support DMA with read/write buffer info. And constant address mode
|
|
- Improve audio_test example and add audio_4_channel_mic example
|
|
- Add new dfu example
|
|
- Remove pico-sdk from submodule
|
|
|
|
Device Controller Driver (DCD)
|
|
------------------------------
|
|
|
|
- Add new DCD port for Silabs EFM32GG12 with board Thunderboard Kit (SLTB009A)
|
|
- Add new DCD port Renesas RX63N, board GR-CITRUS
|
|
- Add new (optional) endpoint API dcd_edpt_xfer_fifo
|
|
- Fix build with nRF5340
|
|
- Fix build with lpc15 and lpc54
|
|
- Fix build with lpc177x_8x
|
|
- STM32 Synopsys: greatly improve Isochronous transfer with edpt_xfer_fifo API
|
|
- Support LPC55 port1 highspeed
|
|
- Add support for Espressif esp32s3
|
|
- nRF: fix race condition that could cause drop packet of Bulk OUT transfer
|
|
|
|
USB Device Driver (USBD)
|
|
------------------------
|
|
|
|
- Add new (optional) endpoint ADPI usbd_edpt_xfer_fifo
|
|
|
|
Device Class Driver
|
|
-------------------
|
|
|
|
CDC
|
|
|
|
- [Breaking] tud_cdc_peek(), tud_vendor_peek() no longer support random offset and dropped position parameter.
|
|
|
|
DFU
|
|
|
|
- Add new DFU 1.1 class driver (WIP)
|
|
|
|
HID
|
|
|
|
- Fix keyboard report descriptor template
|
|
- Add more hid keys constant from 0x6B to 0xA4
|
|
|
|
- [Breaking] rename API
|
|
- HID_PROTOCOL_NONE/KEYBOARD/MOUST to HID_ITF_PROTOCOL_NONE/KEYBOARD/MOUSE
|
|
- tud_hid_boot_mode() to tud_hid_get_protocol()
|
|
- tud_hid_boot_mode_cb() to tud_hid_set_protocol_cb()
|
|
|
|
MIDI
|
|
|
|
- Fix MIDI buffer overflow issue
|
|
|
|
- [Breaking] rename API
|
|
- Rename tud_midi_read() to tud_midi_stream_read()
|
|
- Rename tud_midi_write() to tud_midi_stream_write()
|
|
- Rename tud_midi_receive() to tud_midi_packet_read()
|
|
- Rename tud_midi_send() to tud_midi_packet_write()
|
|
|
|
Host Controller Driver (HCD)
|
|
----------------------------
|
|
|
|
- No noticeable changes
|
|
|
|
USB Host Driver (USBH)
|
|
----------------------
|
|
|
|
- No noticeable changes
|
|
|
|
Host Class Driver
|
|
-----------------
|
|
|
|
- HID: Rework host hid driver, basically everything changes
|
|
|
|
|
|
0.9.0 (2021-03-12)
|
|
==================
|
|
|
|
Device Stack
|
|
------------
|
|
|
|
Device Controller Driver (DCD)
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
RP2040
|
|
|
|
- Fix endpoint buffer reallocation overrun problem
|
|
- Fix osal_pico queue overflow in initialization
|
|
- Fix Isochronous endpoint buffer size in transfer
|
|
- Optimize hardware endpoint struct to reduce RAM usage
|
|
- Fix enum walkaround forever check for SE0 when pull up is disabled
|
|
|
|
Sony CXD56
|
|
|
|
- Pass the correct speed on Spresense
|
|
- Fix setup processed flag
|
|
|
|
NXP Transdimention
|
|
|
|
- Update dcd_init() to reset controller to device mode
|
|
|
|
USB Device Driver (USBD)
|
|
^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
- Fix issue with status zlp (tud_control_status) is returned by class driver with SET/CLEAR_FEATURE for endpoint.
|
|
- Correct endpoint size check for fullspeed bulk, can be 8, 16, 32, 64
|
|
- Ack SET_INTERFACE even if it is not implemented by class driver.
|
|
|
|
Device Class Driver
|
|
^^^^^^^^^^^^^^^^^^^
|
|
|
|
DFU Runtime
|
|
|
|
- rename dfu_rt to dfu_runtime for easy reading
|
|
|
|
CDC
|
|
|
|
- Add tud_cdc_send_break_cb() to support break request
|
|
- Improve CDC receive, minor behavior changes: when tud_cdc_rx_wanted_cb() is invoked wanted_char may not be the last byte in the fifo
|
|
|
|
HID
|
|
|
|
- [Breaking] Add itf argument to hid API to support multiple instances, follow API has signature changes
|
|
|
|
- tud_hid_descriptor_report_cb()
|
|
- tud_hid_get_report_cb()
|
|
- tud_hid_set_report_cb()
|
|
- tud_hid_boot_mode_cb()
|
|
- tud_hid_set_idle_cb()
|
|
|
|
- Add report complete callback tud_hid_report_complete_cb() API
|
|
- Add DPad/Hat support for HID Gamepad
|
|
|
|
- `TUD_HID_REPORT_DESC_GAMEPAD()` now support 16 buttons, 2 joysticks, 1 hat/dpad
|
|
- Add hid_gamepad_report_t along with `GAMEPAD_BUTTON_` and `GAMEPAD_HAT_` enum
|
|
- Add Gamepad to hid_composite / hid_composite_freertos example
|
|
|
|
MIDI
|
|
|
|
- Fix dropping MIDI sysex message when fifo is full
|
|
- Fix typo in tud_midi_write24(), make example less ambiguous for cable and channel
|
|
- Fix incorrect endpoint descriptor length, MIDI v1 use Audio v1 which has 9-byte endpoint descriptor (instead of 7)
|
|
|
|
Host Stack
|
|
----------
|
|
|
|
Host Controller Driver (HCD)
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
- Add rhport to hcd_init()
|
|
- Improve EHCI/OHCI driver abstraction
|
|
|
|
- Move echi/ohci files to portable/
|
|
- Rename hcd_lpc18_43 to hcd_transdimension
|
|
- Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr()
|
|
|
|
- Update NXP transdimention hcd_init() to reset controller to host mode
|
|
|
|
- Ported hcd to rt10xx
|
|
|
|
USB Host Driver (USBH)
|
|
^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
- No noticeable changes to usbh
|
|
|
|
Host Class Driver
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
MSC
|
|
|
|
- Rename tuh_msc_scsi_inquiry() to tuh_msc_inquiry()
|
|
- Rename tuh_msc_mounted_cb/tuh_msc_unmounted_cb to tuh_msc_mount_cb/tuh_msc_unmount_cb to match device stack naming
|
|
- Change tuh_msc_is_busy() to tuh_msc_ready()
|
|
- Add read10 and write10 function: tuh_msc_read10(), tuh_msc_write10()
|
|
- Read_Capacity is invoked as part of enumeration process
|
|
- Add tuh_msc_get_block_count(), tuh_msc_get_block_size()
|
|
- Add CFG_TUH_MSC_MAXLUN (default to 4) to hold lun capacities
|
|
|
|
Others
|
|
------
|
|
|
|
- Add basic support for rt-thread OS
|
|
- Change zero bitfield length to more explicit padding
|
|
- Build example now fetch required submodules on the fly while running `make` without prio submodule init for mcu drivers
|
|
- Update pico-sdk to v1.1.0
|
|
|
|
**New Boards**
|
|
|
|
- Microchip SAM E54 Xplained Pro
|
|
- LPCXpresso 55s28
|
|
- LPCXpresso 18s37
|
|
|
|
|
|
0.8.0 (2021-02-05)
|
|
==================
|
|
|
|
Device Controller Driver
|
|
------------------------
|
|
|
|
- Added new device support for Raspberry Pi RP2040
|
|
- Added new device support for NXP Kinetis KL25ZXX
|
|
- Use dcd_event_bus_reset() with link speed to replace bus_signal
|
|
|
|
- ESP32-S2:
|
|
- Add bus suspend and wakeup support
|
|
|
|
- SAMD21:
|
|
- Fix (walkaround) samd21 setup_packet overflow by USB DMA
|
|
|
|
- STM32 Synopsys:
|
|
- Rework USB FIFO allocation scheme and allow RX FIFO size reduction
|
|
|
|
- Sony CXD56
|
|
- Update Update Spresense SDK to 2.0.2
|
|
- Fix dcd issues with setup packets
|
|
- Correct EP number for cdc_msc example
|
|
|
|
USB Device
|
|
----------
|
|
|
|
**USBD**
|
|
|
|
- Rework usbd control transfer to have additional stage parameter for setup, data, status
|
|
- Fix tusb_init() return true instead of TUSB_ERROR_NONE
|
|
- Added new API tud_connected() that return true after device got out of bus reset and received the very first setup packet
|
|
|
|
**Class Driver**
|
|
|
|
- CDC
|
|
- Allow to transmit data, even if the host does not support control line states i.e set DTR
|
|
|
|
- HID
|
|
- change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64
|
|
|
|
- MIDI
|
|
- Fix midi sysex sending bug
|
|
|
|
- MSC
|
|
- Invoke only scsi complete callback after status transaction is complete.
|
|
- Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error.
|
|
|
|
- USBTMC
|
|
- Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu
|
|
|
|
**Example**
|
|
|
|
- Support make from windows cmd.exe
|
|
- Add HID Consumer Control (media keys) to hid_composite & hid_composite_freertos examples
|
|
|
|
|
|
USB Host
|
|
--------
|
|
|
|
No noticeable changes to host stack
|
|
|
|
New Boards
|
|
----------
|
|
|
|
- NXP/Freescale Freedom FRDM-KL25Z
|
|
- Feather Double M33 express
|
|
- Raspberry Pi Pico
|
|
- Adafruit Feather RP2040
|
|
- Adafruit Itsy Bitsy RP2040
|
|
- Adafruit QT RP2040
|
|
- Adfruit Feather ESP32-S2
|
|
- Adafruit Magtag 29" Eink
|
|
- Adafruit Metro ESP32-S2
|
|
- Adafruit PyBadge
|
|
- Adafruit PyPortal
|
|
- Great Scott Gadgets' LUNA D11 & D21
|
|
|
|
|
|
0.7.0 (2020-11-08)
|
|
==================
|
|
|
|
Device Controller Driver
|
|
------------------------
|
|
|
|
- Added new support for Espressif ESP32-S2
|
|
- Added new support for Dialog DA1469x
|
|
- Enhance STM32 Synopsys
|
|
|
|
- Support bus events disconnection/suspend/resume/wakeup
|
|
- Improve transfer performance with optimizing xfer and fifo size
|
|
- Support Highspeed port (OTG_HS) with both internal and external PHY
|
|
- Support multiple usb ports with rhport=1 is highspeed on selected MCUs e.g H743, F23. It is possible to have OTG_HS to run on Fullspeed PHY (e.g lacking external PHY)
|
|
- Add ISO transfer, fix odd/even frame
|
|
- Fix FIFO flush during stall
|
|
- Implement dcd_edpt_close() API
|
|
- Support F105, F107
|
|
|
|
- Enhance STM32 fsdev
|
|
- Improve dcd fifo allocation
|
|
- Fix ISTR race condition
|
|
- Support remap USB IRQ on supported MCUs
|
|
- Implement dcd_edpt_close() API
|
|
|
|
- Enhance NUC 505: enhance set configure behavior
|
|
|
|
- Enhance SAMD
|
|
- Fix race condition with setup packet
|
|
- Add SAMD11 option `OPT_MCU_SAMD11`
|
|
- Add SAME5x option `OPT_MCU_SAME5X`
|
|
|
|
- Fix SAMG control data toggle and stall race condition
|
|
|
|
- Enhance nRF
|
|
- Fix hanged when tud_task() is called within critical section (disabled interrupt)
|
|
- Fix disconnect bus event not submitted
|
|
- Implement ISO transfer and dcd_edpt_close()
|
|
|
|
|
|
USB Device
|
|
----------
|
|
|
|
**USBD**
|
|
|
|
- Add new class driver for **Bluetooth HCI** class driver with example can be found in [mynewt-tinyusb-example](https://github.com/hathach/mynewt-tinyusb-example) since it needs mynewt OS to run with.
|
|
- Fix USBD endpoint usage racing condition with `usbd_edpt_claim()/usbd_edpt_release()`
|
|
- Added `tud_task_event_ready()` and `osal_queue_empty()`. This API is needed to check before enter low power mode with WFI/WFE
|
|
- Rename USB IRQ Handler to `dcd_int_handler()`. Application must define IRQ handler in which it calls this API.
|
|
- Add `dcd_connect()` and `dcd_disconnect()` to enable/disable internal pullup on D+/D- on supported MCUs.
|
|
- Add `usbd_edpt_open()`
|
|
- Remove `dcd_set_config()`
|
|
- Add *OPT_OS_CUMSTOM* as hook for application to overwrite and/or add their own OS implementation
|
|
- Support SET_INTERFACE, GET_INTERFACE request
|
|
- Add Logging for debug with optional uart/rtt/swo printf retarget or `CFG_TUSB_DEBUG_PRINTF` hook
|
|
- Add IAR compiler support
|
|
- Support multiple configuration descriptors. `TUD_CONFIG_DESCRIPTOR()` template has extra config_num as 1st argument
|
|
- Improve USB Highspeed support with actual link speed detection with `dcd_event_bus_reset()`
|
|
|
|
- Enhance class driver management
|
|
- `usbd_driver_open()` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver
|
|
- Add application implemented class driver via `usbd_app_driver_get_cb()`
|
|
- IAD is handled to assign driver id
|
|
|
|
- Added `tud_descriptor_device_qualifier_cb()` callback
|
|
- Optimize `tu_fifo` bulk write/read transfer
|
|
- Forward non-std control request to class driver
|
|
- Let application handle Microsoft OS 1.0 Descriptors (the 0xEE index string)
|
|
- Fix OSAL FreeRTOS yield from ISR
|
|
|
|
**Class Drivers**
|
|
|
|
- USBNET: remove ACM-EEM due to lack of support from host
|
|
- USBTMC: fix descriptors when INT EP is disabled
|
|
|
|
- CDC:
|
|
- Send zero length packet for end of data when needed
|
|
- Add `tud_cdc_tx_complete_cb()` callback
|
|
- Change tud_cdc_n_write_flush() return number of bytes forced to transfer, and flush when writing enough data to fifo
|
|
|
|
- MIDI:
|
|
- Add packet interface
|
|
- Add multiple jack descriptors
|
|
- Fix MIDI driver for sysex
|
|
|
|
- DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request
|
|
|
|
- Rename some configure macro to make it clear that those are used directly for endpoint transfer
|
|
- CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE
|
|
- CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE
|
|
- CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE
|
|
- CFG_TUD_MIDI_EPSIZE to CFG_TUD_MIDI_EP_BUFSIZE
|
|
|
|
- HID:
|
|
- Fix gamepad template descriptor
|
|
- Add multiple HID interface API
|
|
- Add extra comma to HID_REPORT_ID
|
|
|
|
USB Host
|
|
--------
|
|
|
|
- Rework USB host stack (still work in progress)
|
|
- Fix compile error with pipehandle
|
|
- Rework usbh control and enumeration as non-blocking
|
|
|
|
- Improve Hub, MSC, HID host driver
|
|
|
|
Examples
|
|
--------
|
|
|
|
- Add new hid_composite_freertos
|
|
- Add new dynamic_configuration to demonstrate how to switch configuration descriptors
|
|
- Add new hid_multiple_interface
|
|
|
|
- Enhance `net_lwip_webserver` example
|
|
- Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both)
|
|
- Update lwip to STABLE-2_1_2_RELEASE for net_lwip_webserver
|
|
|
|
- Added new Audio example: audio_test uac2_headsest
|
|
|
|
New Boards
|
|
----------
|
|
|
|
- Espressif ESP32-S2: saola_1, kaluga_1
|
|
- STM32: F746 Nucleo, H743 Eval, H743 Nucleo, F723 discovery, stlink v3 mini, STM32L4r5 Nucleo
|
|
- Dialog DA1469x dk pro and dk usb
|
|
- Microchip: Great Scoot Gadgets' LUNA, samd11_xplained, D5035-01, atsamd21 xplained pro
|
|
- nRF: ItsyBitsy nRF52840
|
|
|
|
|
|
0.6.0 (2020-03-30)
|
|
==================
|
|
|
|
Added **CONTRIBUTORS.md** to give proper credit for contributors to the stack. Special thanks to `Nathan Conrad <https://github.com/pigrew>`__ , `Peter Lawrence <https://github.com/majbthrd>`__ , `William D. Jones <https://github.com/cr1901>`__ and `Sean Cross <https://github.com/xobs>`__ and others for spending their precious time to add lots of features and ports for this release.
|
|
|
|
Added
|
|
-----
|
|
|
|
**MCU**
|
|
|
|
- Added support for Microchip SAMG55
|
|
- Added support for Nordic nRF52833
|
|
- Added support for Nuvoton: NUC120, NUC121/NUC125, NUC126, NUC505
|
|
- Added support for NXP LPC: 51Uxx, 54xxx, 55xx
|
|
- Added support for NXP iMXRT: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
|
|
- Added support for Sony CXD56 (Spresense)
|
|
- Added support for STM32: L0, F0, F1, F2, F3, F4, F7, H7
|
|
- Added support for TI MSP430
|
|
- Added support for ValentyUSB's eptri
|
|
|
|
**Class Driver**
|
|
|
|
- Added DFU Runtime class driver
|
|
- Added Network class driver with RNDIS, CDC-ECM, CDC-EEM (work in progress)
|
|
- Added USBTMC class driver
|
|
- Added WebUSB class driver using vendor-specific class
|
|
- Added multiple instances support for CDC and MIDI
|
|
- Added a handful of unit test with Ceedling.
|
|
- Added LOG support for debugging with CFG_TUSB_DEBUG
|
|
- Added `tud_descriptor_bos_cb()` for BOS descriptor (required for USB 2.1)
|
|
- Added `dcd_edpt0_status_complete()` as optional API for DCD
|
|
|
|
**Examples**
|
|
|
|
Following examples are added:
|
|
|
|
- board_test
|
|
- cdc_dual_ports
|
|
- dfu_rt
|
|
- hid_composite
|
|
- net_lwip_webserver
|
|
- usbtmc
|
|
- webusb_serial
|
|
|
|
Changed
|
|
-------
|
|
|
|
- Changed `tud_descriptor_string_cb()` to have additional Language ID argument
|
|
- Merged hal_nrf5x.c into dcd_nrf5x.c
|
|
- Merged dcd_samd21.c and dcd_samd51.c into dcd_samd.c
|
|
- Generalized dcd_stm32f4.c to dcd_synopsys.c
|
|
- Changed cdc_msc_hid to cdc_msc (drop hid) due to limited endpoints number of some MCUs
|
|
- Improved DCD SAMD stability, fix missing setup packet occasionally
|
|
- Improved usbd/usbd_control with proper handling of zero-length packet (ZLP)
|
|
- Improved STM32 DCD FSDev
|
|
- Improved STM32 DCD Synopsys
|
|
- Migrated CI from Travis to Github Action
|
|
- Updated nrfx submodule to 2.1.0
|
|
- Fixed mynewt osal queue definition
|
|
- Fixed cdc_msc_freertos example build for all MCUs
|
|
|
|
|
|
0.5.0 (2019-06)
|
|
===============
|
|
|
|
First release, device stack works great, host stack works but still need improvement.
|
|
|
|
- Special thanks to @adafruit team, especially @tannewt to help out immensely to rework device stack: simplify osal & control transfer, adding SAMD21/SAMD51 ports, writing porting docs, adding MIDI class support etc...
|
|
- Thanks to @cr1901 for adding STM32F4 port.
|
|
- Thanks to @PTS93 and @todbot for HID raw API
|