824 lines
35 KiB
Plaintext
824 lines
35 KiB
Plaintext
/*
|
|
Linker File for Renesas FSP
|
|
*/
|
|
|
|
INCLUDE memory_regions.ld
|
|
|
|
/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/
|
|
/*
|
|
XIP_SECONDARY_SLOT_IMAGE = 1;
|
|
*/
|
|
|
|
QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH);
|
|
OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH);
|
|
OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH);
|
|
|
|
/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */
|
|
__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0);
|
|
|
|
ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0;
|
|
ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0;
|
|
DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0;
|
|
DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0;
|
|
RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0;
|
|
RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0;
|
|
RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH;
|
|
RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH;
|
|
|
|
OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80;
|
|
OPTION_SETTING_DATA_FLASH_S_START = DEFINED(OPTION_SETTING_DATA_FLASH_S_START) ? OPTION_SETTING_DATA_FLASH_S_START : 0;
|
|
OPTION_SETTING_DATA_FLASH_S_LENGTH = DEFINED(OPTION_SETTING_DATA_FLASH_S_LENGTH) ? OPTION_SETTING_DATA_FLASH_S_LENGTH : 0;
|
|
|
|
/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings.
|
|
* Bootloader images do not configure option settings because they are owned by the bootloader.
|
|
* FSP_BOOTABLE_IMAGE is only defined in bootloader images. */
|
|
__bl_FSP_BOOTABLE_IMAGE = 1;
|
|
__bln_FSP_BOOTABLE_IMAGE = 1;
|
|
PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE);
|
|
USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE);
|
|
USE_OPTION_SETTING_DATA_FLASH = PROJECT_SECURE_OR_FLAT && (OPTION_SETTING_DATA_FLASH_S_LENGTH != 0);
|
|
|
|
__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH :
|
|
(DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH :
|
|
FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH;
|
|
__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH;
|
|
__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH;
|
|
__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH;
|
|
__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH;
|
|
__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
|
|
__bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH;
|
|
__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
|
|
__bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH;
|
|
__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
|
|
RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH;
|
|
__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
|
|
__bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH;
|
|
__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
|
|
__bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2;
|
|
__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START);
|
|
__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
|
|
FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
|
|
FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2;
|
|
|
|
XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0;
|
|
FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START :
|
|
XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START :
|
|
FLASH_IMAGE_START;
|
|
LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH :
|
|
DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH :
|
|
FLASH_LENGTH;
|
|
OPTION_SETTING_SAS_SIZE = 0x34;
|
|
OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 :
|
|
OPTION_SETTING_LENGTH == 0 ? 0 :
|
|
OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE;
|
|
|
|
/* Define memory regions. */
|
|
MEMORY
|
|
{
|
|
ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH
|
|
DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH
|
|
FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH
|
|
RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
|
|
DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH
|
|
QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH
|
|
OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
|
|
OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
|
|
OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
|
|
OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
|
|
SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH
|
|
OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH
|
|
OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18
|
|
OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH
|
|
OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH
|
|
OPTION_SETTING_DATA_FLASH_S (r) : ORIGIN = OPTION_SETTING_DATA_FLASH_S_START, LENGTH = OPTION_SETTING_DATA_FLASH_S_LENGTH
|
|
ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH
|
|
}
|
|
|
|
/* Library configurations */
|
|
GROUP(libgcc.a libc.a libm.a)
|
|
|
|
/* Linker script to place sections and symbol values. Should be used together
|
|
* with other linker script that defines memory regions FLASH and RAM.
|
|
* It references following symbols, which must be DEFINED in code:
|
|
* Reset_Handler : Entry of reset handler
|
|
*
|
|
* It defines following symbols, which code can use without definition:
|
|
* __exidx_start
|
|
* __exidx_end
|
|
* __copy_table_start__
|
|
* __copy_table_end__
|
|
* __zero_table_start__
|
|
* __zero_table_end__
|
|
* __etext
|
|
* __data_start__
|
|
* __preinit_array_start
|
|
* __preinit_array_end
|
|
* __init_array_start
|
|
* __init_array_end
|
|
* __fini_array_start
|
|
* __fini_array_end
|
|
* __data_end__
|
|
* __bss_start__
|
|
* __bss_end__
|
|
* __HeapLimit
|
|
* __StackLimit
|
|
* __StackTop
|
|
* __stack
|
|
* __Vectors_End
|
|
* __Vectors_Size
|
|
* __qspi_flash_start__
|
|
* __qspi_flash_end__
|
|
* __qspi_flash_code_size__
|
|
* __qspi_region_max_size__
|
|
* __qspi_region_start_address__
|
|
* __qspi_region_end_address__
|
|
* __ospi_device_0_start__
|
|
* __ospi_device_0_end__
|
|
* __ospi_device_0_code_size__
|
|
* __ospi_device_0_region_max_size__
|
|
* __ospi_device_0_region_start_address__
|
|
* __ospi_device_0_region_end_address__
|
|
* __ospi_device_1_start__
|
|
* __ospi_device_1_end__
|
|
* __ospi_device_1_code_size__
|
|
* __ospi_device_1_region_max_size__
|
|
* __ospi_device_1_region_start_address__
|
|
* __ospi_device_1_region_end_address__
|
|
*/
|
|
ENTRY(Reset_Handler)
|
|
|
|
SECTIONS
|
|
{
|
|
.text :
|
|
{
|
|
__tz_FLASH_S = ABSOLUTE(FLASH_START);
|
|
__ROM_Start = .;
|
|
|
|
/* Even though the vector table is not 256 entries (1KB) long, we still allocate that much
|
|
* space because ROM registers are at address 0x400 and there is very little space
|
|
* in between. */
|
|
KEEP(*(.fixed_vectors*))
|
|
KEEP(*(.application_vectors*))
|
|
__Vectors_End = .;
|
|
|
|
/* Some devices have a gap of code flash between the vector table and ROM Registers.
|
|
* The flash gap section allows applications to place code and data in this section. */
|
|
*(.flash_gap*)
|
|
|
|
/* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */
|
|
. = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400;
|
|
KEEP(*(.rom_registers*))
|
|
|
|
/* Reserving 0x100 bytes of space for ROM registers. */
|
|
. = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500;
|
|
|
|
/* Allocate flash write-boundary-aligned
|
|
* space for sce9 wrapped public keys for mcuboot if the module is used.
|
|
*/
|
|
KEEP(*(.mcuboot_sce9_key*))
|
|
|
|
*(.text*)
|
|
|
|
KEEP(*(.version))
|
|
KEEP(*(.init))
|
|
KEEP(*(.fini))
|
|
|
|
/* .ctors */
|
|
*crtbegin.o(.ctors)
|
|
*crtbegin?.o(.ctors)
|
|
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
|
*(SORT(.ctors.*))
|
|
*(.ctors)
|
|
|
|
/* .dtors */
|
|
*crtbegin.o(.dtors)
|
|
*crtbegin?.o(.dtors)
|
|
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
|
*(SORT(.dtors.*))
|
|
*(.dtors)
|
|
|
|
*(.rodata*)
|
|
__usb_dev_descriptor_start_fs = .;
|
|
KEEP(*(.usb_device_desc_fs*))
|
|
__usb_cfg_descriptor_start_fs = .;
|
|
KEEP(*(.usb_config_desc_fs*))
|
|
__usb_interface_descriptor_start_fs = .;
|
|
KEEP(*(.usb_interface_desc_fs*))
|
|
__usb_descriptor_end_fs = .;
|
|
__usb_dev_descriptor_start_hs = .;
|
|
KEEP(*(.usb_device_desc_hs*))
|
|
__usb_cfg_descriptor_start_hs = .;
|
|
KEEP(*(.usb_config_desc_hs*))
|
|
__usb_interface_descriptor_start_hs = .;
|
|
KEEP(*(.usb_interface_desc_hs*))
|
|
__usb_descriptor_end_hs = .;
|
|
|
|
KEEP(*(.eh_frame*))
|
|
|
|
__ROM_End = .;
|
|
} > FLASH = 0xFF
|
|
|
|
__Vectors_Size = __Vectors_End - __Vectors;
|
|
|
|
. = .;
|
|
__itcm_data_pre_location = .;
|
|
|
|
/* Initialized ITCM data. */
|
|
/* Aligned to FCACHE2 for RA8. */
|
|
.itcm_data : ALIGN(16)
|
|
{
|
|
/* Start of ITCM Secure Trustzone region. */
|
|
__tz_ITCM_S = ABSOLUTE(ITCM_START);
|
|
|
|
/* All ITCM data start */
|
|
__itcm_data_start = .;
|
|
|
|
KEEP(*(.itcm_data*))
|
|
|
|
/* Pad to eight byte alignment in case of ECC initialization. Fill zero. */
|
|
. = ALIGN(8);
|
|
|
|
/* All ITCM data end */
|
|
__itcm_data_end = .;
|
|
|
|
/*
|
|
* Start of the ITCM Non-Secure Trustzone region.
|
|
* ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects.
|
|
*/
|
|
__tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192);
|
|
} > ITCM AT > FLASH = 0x00
|
|
|
|
/* Addresses exported for ITCM initialization. */
|
|
__itcm_data_init_start = LOADADDR(.itcm_data);
|
|
__itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data);
|
|
|
|
ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.")
|
|
ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.")
|
|
ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.")
|
|
ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.")
|
|
|
|
/* Restore location counter. */
|
|
/* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */
|
|
/* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */
|
|
. = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location;
|
|
|
|
__exidx_start = .;
|
|
/DISCARD/ :
|
|
{
|
|
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
|
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
|
}
|
|
__exidx_end = .;
|
|
|
|
/* To copy multiple ROM to RAM sections,
|
|
* uncomment .copy.table section and,
|
|
* define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
|
|
/*
|
|
.copy.table :
|
|
{
|
|
. = ALIGN(4);
|
|
__copy_table_start__ = .;
|
|
LONG (__etext)
|
|
LONG (__data_start__)
|
|
LONG (__data_end__ - __data_start__)
|
|
LONG (__etext2)
|
|
LONG (__data2_start__)
|
|
LONG (__data2_end__ - __data2_start__)
|
|
__copy_table_end__ = .;
|
|
} > FLASH
|
|
*/
|
|
|
|
/* To clear multiple BSS sections,
|
|
* uncomment .zero.table section and,
|
|
* define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
|
|
/*
|
|
.zero.table :
|
|
{
|
|
. = ALIGN(4);
|
|
__zero_table_start__ = .;
|
|
LONG (__bss_start__)
|
|
LONG (__bss_end__ - __bss_start__)
|
|
LONG (__bss2_start__)
|
|
LONG (__bss2_end__ - __bss2_start__)
|
|
__zero_table_end__ = .;
|
|
} > FLASH
|
|
*/
|
|
|
|
__etext = .;
|
|
|
|
__tz_RAM_S = ORIGIN(RAM);
|
|
|
|
/* If DTC is used, put the DTC vector table at the start of SRAM.
|
|
This avoids memory holes due to 1K alignment required by it. */
|
|
.fsp_dtc_vector_table (NOLOAD) :
|
|
{
|
|
. = ORIGIN(RAM);
|
|
*(.fsp_dtc_vector_table)
|
|
} > RAM
|
|
|
|
/* Initialized data section. */
|
|
.data :
|
|
{
|
|
__data_start__ = .;
|
|
. = ALIGN(4);
|
|
|
|
__Code_In_RAM_Start = .;
|
|
|
|
KEEP(*(.code_in_ram*))
|
|
__Code_In_RAM_End = .;
|
|
|
|
*(vtable)
|
|
/* Don't use *(.data*) because it will place data meant for .data_flash in this section. */
|
|
*(.data.*)
|
|
*(.data)
|
|
|
|
. = ALIGN(4);
|
|
/* preinit data */
|
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
KEEP(*(.preinit_array))
|
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
|
|
. = ALIGN(4);
|
|
/* init data */
|
|
PROVIDE_HIDDEN (__init_array_start = .);
|
|
KEEP(*(SORT(.init_array.*)))
|
|
KEEP(*(.init_array))
|
|
PROVIDE_HIDDEN (__init_array_end = .);
|
|
|
|
|
|
. = ALIGN(4);
|
|
/* finit data */
|
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
KEEP(*(SORT(.fini_array.*)))
|
|
KEEP(*(.fini_array))
|
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
|
|
KEEP(*(.jcr*))
|
|
|
|
. = ALIGN(4);
|
|
|
|
/* All data end */
|
|
__data_end__ = .;
|
|
|
|
} > RAM AT > FLASH
|
|
|
|
. = .;
|
|
__dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data);
|
|
|
|
/* Initialized DTCM data. */
|
|
/* Aligned to FCACHE2 for RA8. */
|
|
.dtcm_data : ALIGN(16)
|
|
{
|
|
/* Start of DTCM Secure Trustzone region. */
|
|
__tz_DTCM_S = ABSOLUTE(DTCM_START);
|
|
|
|
/* Initialized DTCM data start */
|
|
__dtcm_data_start = .;
|
|
|
|
KEEP(*(.dtcm_data*))
|
|
|
|
/* Pad to eight byte alignment in case of ECC initialization. Fill zero. */
|
|
. = ALIGN(8);
|
|
|
|
/* Initialized DTCM data end */
|
|
__dtcm_data_end = .;
|
|
} > DTCM AT > FLASH = 0x00
|
|
|
|
. = __dtcm_data_end;
|
|
/* Uninitialized DTCM data. */
|
|
/* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */
|
|
.dtcm_bss ALIGN(8) (NOLOAD) :
|
|
{
|
|
/* Uninitialized DTCM data start */
|
|
__dtcm_bss_start = .;
|
|
|
|
KEEP(*(.dtcm_bss*))
|
|
|
|
/* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */
|
|
. = ALIGN(8);
|
|
|
|
/* Uninitialized DTCM data end */
|
|
__dtcm_bss_end = .;
|
|
|
|
/*
|
|
* Start of the DTCM Non-Secure Trustzone region.
|
|
* DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects.
|
|
*/
|
|
__tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192);
|
|
} > DTCM
|
|
|
|
/* Addresses exported for DTCM initialization. */
|
|
__dtcm_data_init_start = LOADADDR(.dtcm_data);
|
|
__dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data);
|
|
|
|
ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.")
|
|
ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.")
|
|
ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).")
|
|
ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.")
|
|
ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.")
|
|
ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.")
|
|
ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.")
|
|
ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.")
|
|
|
|
/* Restore location counter. */
|
|
/* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */
|
|
/* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */
|
|
. = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location;
|
|
|
|
/* TrustZone Secure Gateway Stubs Section */
|
|
|
|
/* Store location counter for SPI non-retentive sections. */
|
|
sgstubs_pre_location = .;
|
|
|
|
/* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */
|
|
SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024);
|
|
.gnu.sgstubs SGSTUBS_LOC : ALIGN(1024)
|
|
{
|
|
__FLASH_NSC_START = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024);
|
|
_start_sg = .;
|
|
*(.gnu.sgstubs*)
|
|
. = ALIGN(32);
|
|
_end_sg = .;
|
|
} > FLASH
|
|
|
|
__tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768);
|
|
FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH);
|
|
|
|
/* QSPI_FLASH section to be downloaded via debugger */
|
|
.qspi_flash :
|
|
{
|
|
__qspi_flash_start__ = .;
|
|
KEEP(*(.qspi_flash*))
|
|
KEEP(*(.code_in_qspi*))
|
|
__qspi_flash_end__ = .;
|
|
} > QSPI_FLASH
|
|
__qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__;
|
|
|
|
/* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */
|
|
__qspi_flash_code_addr__ = sgstubs_pre_location;
|
|
.qspi_non_retentive : AT(__qspi_flash_code_addr__)
|
|
{
|
|
__qspi_non_retentive_start__ = .;
|
|
KEEP(*(.qspi_non_retentive*))
|
|
__qspi_non_retentive_end__ = .;
|
|
} > QSPI_FLASH
|
|
__qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__;
|
|
|
|
__qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */
|
|
__qspi_region_start_address__ = __qspi_flash_start__;
|
|
__qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_QSPI_FLASH_N = __qspi_non_retentive_end__;
|
|
|
|
/* Support for OctaRAM */
|
|
.OSPI_DEVICE_0_NO_LOAD (NOLOAD):
|
|
{
|
|
. = ALIGN(4);
|
|
__ospi_device_0_start__ = .;
|
|
*(.ospi_device_0_no_load*)
|
|
. = ALIGN(4);
|
|
__ospi_device_0_end__ = .;
|
|
} > OSPI_DEVICE_0_RAM
|
|
|
|
.OSPI_DEVICE_1_NO_LOAD (NOLOAD):
|
|
{
|
|
. = ALIGN(4);
|
|
__ospi_device_1_start__ = .;
|
|
*(.ospi_device_1_no_load*)
|
|
. = ALIGN(4);
|
|
__ospi_device_1_end__ = .;
|
|
} > OSPI_DEVICE_1_RAM
|
|
|
|
/* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0);
|
|
|
|
/* OSPI_DEVICE_0 section to be downloaded via debugger */
|
|
.OSPI_DEVICE_0 :
|
|
{
|
|
__ospi_device_0_start__ = .;
|
|
KEEP(*(.ospi_device_0*))
|
|
KEEP(*(.code_in_ospi_device_0*))
|
|
__ospi_device_0_end__ = .;
|
|
} > OSPI_DEVICE_0
|
|
__ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__;
|
|
|
|
/* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
|
|
__ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive));
|
|
.ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__)
|
|
{
|
|
__ospi_device_0_non_retentive_start__ = .;
|
|
KEEP(*(.ospi_device_0_non_retentive*))
|
|
__ospi_device_0_non_retentive_end__ = .;
|
|
} > OSPI_DEVICE_0
|
|
__ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__;
|
|
|
|
__ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */
|
|
__ospi_device_0_region_start_address__ = __ospi_device_0_start__;
|
|
__ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1);
|
|
|
|
/* OSPI_DEVICE_1 section to be downloaded via debugger */
|
|
.OSPI_DEVICE_1 :
|
|
{
|
|
__ospi_device_1_start__ = .;
|
|
KEEP(*(.ospi_device_1*))
|
|
KEEP(*(.code_in_ospi_device_1*))
|
|
__ospi_device_1_end__ = .;
|
|
} > OSPI_DEVICE_1
|
|
__ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__;
|
|
|
|
/* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
|
|
__ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive));
|
|
.ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__)
|
|
{
|
|
__ospi_device_1_non_retentive_start__ = .;
|
|
KEEP(*(.ospi_device_1_non_retentive*))
|
|
__ospi_device_1_non_retentive_end__ = .;
|
|
} > OSPI_DEVICE_1
|
|
__ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__;
|
|
|
|
__ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */
|
|
__ospi_device_1_region_start_address__ = __ospi_device_1_start__;
|
|
__ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__;
|
|
|
|
.noinit (NOLOAD):
|
|
{
|
|
. = ALIGN(4);
|
|
__noinit_start = .;
|
|
KEEP(*(.noinit*))
|
|
. = ALIGN(8);
|
|
/* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */
|
|
KEEP(*(.heap.*))
|
|
__noinit_end = .;
|
|
} > RAM
|
|
|
|
. = .;
|
|
__nocache_pre_location = .;
|
|
.nocache ALIGN(32) (NOLOAD):
|
|
{
|
|
__nocache_start = .;
|
|
|
|
KEEP(*(.nocache))
|
|
|
|
. = ALIGN(32);
|
|
__nocache_end = .;
|
|
} > RAM
|
|
. = (SIZEOF(.nocache) > 0) ? __nocache_end : __nocache_pre_location;
|
|
|
|
.bss :
|
|
{
|
|
. = ALIGN(4);
|
|
__bss_start__ = .;
|
|
*(.bss*)
|
|
*(COMMON)
|
|
. = ALIGN(4);
|
|
__bss_end__ = .;
|
|
} > RAM
|
|
|
|
.heap (NOLOAD):
|
|
{
|
|
. = ALIGN(8);
|
|
__HeapBase = .;
|
|
/* Place the STD heap here. */
|
|
KEEP(*(.heap))
|
|
__HeapLimit = .;
|
|
} > RAM
|
|
|
|
/* Stacks are stored in this section. */
|
|
.stack_dummy (NOLOAD):
|
|
{
|
|
. = ALIGN(8);
|
|
__StackLimit = .;
|
|
/* Main stack */
|
|
KEEP(*(.stack))
|
|
__StackTop = .;
|
|
/* Thread stacks */
|
|
KEEP(*(.stack*))
|
|
__StackTopAll = .;
|
|
} > RAM
|
|
|
|
PROVIDE(__stack = __StackTopAll);
|
|
|
|
/* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used
|
|
at run time for things such as ThreadX memory pool allocations. */
|
|
__RAM_segment_used_end__ = ALIGN(__StackTopAll , 4);
|
|
|
|
/* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects.
|
|
* If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary.
|
|
* In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
|
|
__RAM_NSC_START = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024);
|
|
|
|
/* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects.
|
|
* RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not
|
|
* specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary.
|
|
* In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
|
|
__tz_RAM_N = DEFINED(FLASH_BOOTLOADER_LENGTH) ? (RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH) : DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_NSC_START, 8192);
|
|
|
|
/* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects.
|
|
* The EDMAC is a non-secure bus master and can only access non-secure RAM. */
|
|
.ns_buffer (NOLOAD):
|
|
{
|
|
/* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */
|
|
. = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .;
|
|
|
|
KEEP(*(.ns_buffer*))
|
|
} > RAM
|
|
|
|
/* Data flash. */
|
|
.data_flash :
|
|
{
|
|
. = ORIGIN(DATA_FLASH);
|
|
__tz_DATA_FLASH_S = .;
|
|
__Data_Flash_Start = .;
|
|
KEEP(*(.data_flash*))
|
|
__Data_Flash_End = .;
|
|
|
|
__tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024);
|
|
} > DATA_FLASH
|
|
|
|
/* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */
|
|
__tz_SDRAM_S = ORIGIN(SDRAM);
|
|
|
|
/* SDRAM */
|
|
.sdram (NOLOAD):
|
|
{
|
|
__SDRAM_Start = .;
|
|
KEEP(*(.sdram*))
|
|
KEEP(*(.frame*))
|
|
__SDRAM_End = .;
|
|
} > SDRAM
|
|
|
|
. = .;
|
|
__nocache_sdram_pre_location = .;
|
|
.nocache_sdram ALIGN(32) (NOLOAD):
|
|
{
|
|
__nocache_sdram_start = .;
|
|
|
|
KEEP(*(.nocache_sdram))
|
|
|
|
. = ALIGN(32);
|
|
__nocache_sdram_end = .;
|
|
} > SDRAM
|
|
. = (SIZEOF(.nocache_sdram) > 0) ? __nocache_sdram_end : __nocache_sdram_pre_location;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */
|
|
__tz_SDRAM_N = __SDRAM_End;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */
|
|
__tz_ID_CODE_S = ORIGIN(ID_CODE);
|
|
|
|
/* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool.
|
|
* Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE
|
|
* memory region between TrustZone projects. */
|
|
__tz_ID_CODE_N = __tz_ID_CODE_S;
|
|
|
|
.id_code :
|
|
{
|
|
__ID_Code_Start = .;
|
|
KEEP(*(.id_code*))
|
|
__ID_Code_End = .;
|
|
} > ID_CODE
|
|
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS);
|
|
|
|
.option_setting_ofs :
|
|
{
|
|
__OPTION_SETTING_OFS_Start = .;
|
|
KEEP(*(.option_setting_ofs0))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start;
|
|
KEEP(*(.option_setting_ofs2))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start;
|
|
KEEP(*(.option_setting_dualsel))
|
|
__OPTION_SETTING_OFS_End = .;
|
|
} > OPTION_SETTING_OFS = 0xFF
|
|
|
|
.option_setting_sas :
|
|
{
|
|
__OPTION_SETTING_SAS_Start = .;
|
|
KEEP(*(.option_setting_sas))
|
|
__OPTION_SETTING_SAS_End = .;
|
|
} > OPTION_SETTING_SAS = 0xFF
|
|
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS);
|
|
|
|
.option_setting_ns :
|
|
{
|
|
__OPTION_SETTING_NS_Start = .;
|
|
KEEP(*(.option_setting_ofs1))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_ofs3))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_banksel))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_bps0))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_bps1))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_bps2))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_bps3))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_pbps0))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_pbps1))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_pbps2))
|
|
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_pbps3))
|
|
__OPTION_SETTING_NS_End = .;
|
|
} > OPTION_SETTING = 0xFF
|
|
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S);
|
|
|
|
.option_setting_s :
|
|
{
|
|
__OPTION_SETTING_S_Start = .;
|
|
KEEP(*(.option_setting_ofs1_sec))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_ofs3_sec))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_banksel_sec))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sec0))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sec1))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sec2))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sec3))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_pbps_sec0))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_pbps_sec1))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_pbps_sec2))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_pbps_sec3))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_ofs1_sel))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_ofs3_sel))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_banksel_sel))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sel0))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sel1))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sel2))
|
|
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sel3))
|
|
__OPTION_SETTING_S_End = .;
|
|
} > OPTION_SETTING_S = 0xFF
|
|
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End;
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_DATA_FLASH_S_S = ORIGIN(OPTION_SETTING_DATA_FLASH_S);
|
|
|
|
.option_setting_data_flash_s :
|
|
{
|
|
__OPTION_SETTING_DATA_FLASH_S_Start = .;
|
|
KEEP(*(.option_setting_data_flash_fsblctrl0))
|
|
. = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x04 : __OPTION_SETTING_DATA_FLASH_S_Start;
|
|
KEEP(*(.option_setting_data_flash_fsblctrl1))
|
|
. = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x08 : __OPTION_SETTING_DATA_FLASH_S_Start;
|
|
KEEP(*(.option_setting_data_flash_fsblctrl2))
|
|
. = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x0C : __OPTION_SETTING_DATA_FLASH_S_Start;
|
|
KEEP(*(.option_setting_data_flash_sacc0))
|
|
. = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x10 : __OPTION_SETTING_DATA_FLASH_S_Start;
|
|
KEEP(*(.option_setting_data_flash_sacc1))
|
|
. = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x14 : __OPTION_SETTING_DATA_FLASH_S_Start;
|
|
KEEP(*(.option_setting_data_flash_samr))
|
|
. = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x2E0 : __OPTION_SETTING_DATA_FLASH_S_Start;
|
|
KEEP(*(.option_setting_data_flash_hoemrtpk))
|
|
__OPTION_SETTING_DATA_FLASH_S_End = .;
|
|
} > OPTION_SETTING_DATA_FLASH_S = 0xFF
|
|
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_DATA_FLASH_S_N = __OPTION_SETTING_DATA_FLASH_S_End;
|
|
}
|