256 lines
8.2 KiB
C
256 lines
8.2 KiB
C
/*
|
|
* @brief LPC13XX Pin Interrupt and Pattern Match Registers and driver
|
|
*
|
|
* @note
|
|
* Copyright(C) NXP Semiconductors, 2012
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Software that is described herein is for illustrative purposes only
|
|
* which provides customers with programming information regarding the
|
|
* LPC products. This software is supplied "AS IS" without any warranties of
|
|
* any kind, and NXP Semiconductors and its licensor disclaim any and
|
|
* all warranties, express or implied, including all implied warranties of
|
|
* merchantability, fitness for a particular purpose and non-infringement of
|
|
* intellectual property rights. NXP Semiconductors assumes no responsibility
|
|
* or liability for the use of the software, conveys no license or rights under any
|
|
* patent, copyright, mask work right, or any other intellectual property rights in
|
|
* or to any products. NXP Semiconductors reserves the right to make changes
|
|
* in the software without notification. NXP Semiconductors also makes no
|
|
* representation or warranty that such application will be suitable for the
|
|
* specified use without further testing or modification.
|
|
*
|
|
* @par
|
|
* Permission to use, copy, modify, and distribute this software and its
|
|
* documentation is hereby granted, under NXP Semiconductors' and its
|
|
* licensor's relevant copyrights in the software, without fee, provided that it
|
|
* is used in conjunction with NXP Semiconductors microcontrollers. This
|
|
* copyright, permission, and disclaimer notice must appear in all copies of
|
|
* this code.
|
|
*/
|
|
|
|
#ifndef __PININT_13XX_H_
|
|
#define __PININT_13XX_H_
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** @defgroup PININT_13XX CHIP: LPC13xx Pin Interrupt and Pattern Match driver
|
|
* @ingroup CHIP_13XX_Drivers
|
|
* @{
|
|
*/
|
|
|
|
#if defined(CHIP_LPC1347)
|
|
|
|
/**
|
|
* @brief LPC13xx Pin Interrupt and Pattern Match register block structure
|
|
*/
|
|
typedef struct { /*!< PIN_INT Structure */
|
|
__IO uint32_t ISEL; /*!< Pin Interrupt Mode register */
|
|
__IO uint32_t IENR; /*!< Pin Interrupt Enable (Rising) register */
|
|
__IO uint32_t SIENR; /*!< Set Pin Interrupt Enable (Rising) register */
|
|
__IO uint32_t CIENR; /*!< Clear Pin Interrupt Enable (Rising) register */
|
|
__IO uint32_t IENF; /*!< Pin Interrupt Enable Falling Edge / Active Level register */
|
|
__IO uint32_t SIENF; /*!< Set Pin Interrupt Enable Falling Edge / Active Level register */
|
|
__IO uint32_t CIENF; /*!< Clear Pin Interrupt Enable Falling Edge / Active Level address */
|
|
__IO uint32_t RISE; /*!< Pin Interrupt Rising Edge register */
|
|
__IO uint32_t FALL; /*!< Pin Interrupt Falling Edge register */
|
|
__IO uint32_t IST; /*!< Pin Interrupt Status register */
|
|
} LPC_PIN_INT_T;
|
|
|
|
/**
|
|
* LPC13xx Pin Interrupt channel values
|
|
*/
|
|
#define PININTCH0 (1 << 0)
|
|
#define PININTCH1 (1 << 1)
|
|
#define PININTCH2 (1 << 2)
|
|
#define PININTCH3 (1 << 3)
|
|
#define PININTCH4 (1 << 4)
|
|
#define PININTCH5 (1 << 5)
|
|
#define PININTCH6 (1 << 6)
|
|
#define PININTCH7 (1 << 7)
|
|
#define PININTCH(ch) (1 << (ch))
|
|
|
|
/**
|
|
* @brief Initialize Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Nothing
|
|
* @note This function should be used after the Chip_GPIO_Init() function.
|
|
*/
|
|
STATIC INLINE void Chip_PININT_Init(LPC_PIN_INT_T *pPININT) {}
|
|
|
|
/**
|
|
* @brief De-Initialize Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_DeInit(LPC_PIN_INT_T *pPININT) {}
|
|
|
|
/**
|
|
* @brief Configure the pins as edge sensitive in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_SetPinModeEdge(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->ISEL &= ~pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Configure the pins as level sensitive in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_SetPinModeLevel(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->ISEL |= pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Return current PININT rising edge or high level interrupt enable state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return A bifield containing the high edge/level interrupt enables for each
|
|
* interrupt. Bit 0 = PININT0, 1 = PININT1, etc.
|
|
* For each bit, a 0 means the high edge/level interrupt is disabled, while a 1
|
|
* means it's enabled.
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetHighEnabled(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->IENR;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable high edge/level PININT interrupts for pins
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins to enable (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_EnableIntHigh(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->SIENR = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable high edge/level PININT interrupts for pins
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins to disable (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_DisableIntHigh(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->CIENR = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Return current PININT falling edge or low level interrupt enable state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return A bifield containing the low edge/level interrupt enables for each
|
|
* interrupt. Bit 0 = PININT0, 1 = PININT1, etc.
|
|
* For each bit, a 0 means the low edge/level interrupt is disabled, while a 1
|
|
* means it's enabled.
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetLowEnabled(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->IENF;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable low edge/level PININT interrupts for pins
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins to enable (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_EnableIntLow(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->SIENF = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable low edge/level PININT interrupts for pins
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins to disable (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_DisableIntLow(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->CIENF = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Return pin states that have a detected latched high edge (RISE) state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return PININT states (bit n = high) with a latched rise state detected
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetRiseStates(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->RISE;
|
|
}
|
|
|
|
/**
|
|
* @brief Clears pin states that had a latched high edge (RISE) state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins with latched states to clear
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_ClearRiseStates(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->RISE = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Return pin states that have a detected latched falling edge (FALL) state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return PININT states (bit n = high) with a latched rise state detected
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetFallStates(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->FALL;
|
|
}
|
|
|
|
/**
|
|
* @brief Clears pin states that had a latched falling edge (FALL) state
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pins with latched states to clear
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_ClearFallStates(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->FALL = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Get interrupt status from Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @return Interrupt status (bit n for PININTn = high means interrupt ie pending)
|
|
*/
|
|
STATIC INLINE uint32_t Chip_PININT_GetIntStatus(LPC_PIN_INT_T *pPININT)
|
|
{
|
|
return pPININT->IST;
|
|
}
|
|
|
|
/**
|
|
* @brief Clear interrupt status in Pin interrupt block
|
|
* @param pPININT : The base address of Pin interrupt block
|
|
* @param pins : Pin interrupts to clear (ORed value of PININTCH*)
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_PININT_ClearIntStatus(LPC_PIN_INT_T *pPININT, uint32_t pins)
|
|
{
|
|
pPININT->IST = pins;
|
|
}
|
|
|
|
#endif /* if defined(CHIP_LPC1347) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __PININT_13XX_H_ */
|