193 lines
6.2 KiB
C
193 lines
6.2 KiB
C
/**************************************************************************/
|
|
/*!
|
|
@file board_ea4357.c
|
|
@author hathach (tinyusb.org)
|
|
|
|
@section LICENSE
|
|
|
|
Software License Agreement (BSD License)
|
|
|
|
Copyright (c) 2013, hathach (tinyusb.org)
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
1. Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holders nor the
|
|
names of its contributors may be used to endorse or promote products
|
|
derived from this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
|
|
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
|
|
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
|
|
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
This file is part of the tinyusb stack.
|
|
*/
|
|
/**************************************************************************/
|
|
|
|
#include "../board.h"
|
|
|
|
#if BOARD == BOARD_EA4357
|
|
|
|
|
|
#define BOARD_UART_PORT LPC_USART0
|
|
#define BOARD_UART_PIN_PORT 0x0f
|
|
#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
|
|
#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD
|
|
|
|
void board_init(void)
|
|
{
|
|
SystemInit();
|
|
CGU_Init();
|
|
SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
|
|
|
|
// USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
|
|
scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7); // USB0 VBus Power
|
|
|
|
// USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required
|
|
|
|
// TODO Device only USB0
|
|
// 1.5Kohm pull-up resistor is needed on the USB DP data signal. GPIO28 (base), P9_5 (LPC4357) controls
|
|
scu_pinmux(0x9, 5, MD_PUP|MD_EZI|MD_ZI, FUNC4); // GPIO5[18]
|
|
GPIO_SetDir(5, BIT_(18), 1); // output
|
|
GPIO_ClearValue(5, BIT_(18));
|
|
|
|
|
|
// init I2C and set up MIC2555 to have 15k pull-down on USB1 D+ & D-
|
|
I2C_Init(LPC_I2C0, 100000);
|
|
I2C_Cmd(LPC_I2C0, ENABLE);
|
|
|
|
pca9532_init(); // Leds Init
|
|
|
|
// ASSERT_INT(0x058d, mic255_get_vendorid(), (void) 0); // verify vendor id
|
|
// ASSERT( mic255_regs_write(6, BIN8(1100)), (void) 0); // pull down D+/D- for host
|
|
|
|
#if CFG_UART_ENABLE
|
|
//------------- UART init -------------//
|
|
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN , FUNC1);
|
|
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
|
|
|
|
UART_CFG_Type UARTConfigStruct;
|
|
UART_ConfigStructInit(&UARTConfigStruct);
|
|
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
|
|
UARTConfigStruct.Clock_Speed = 0;
|
|
|
|
UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
|
|
UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
|
|
#endif
|
|
|
|
#if CFG_PRINTF_TARGET == PRINTF_TARGET_SWO
|
|
#endif
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// LEDS
|
|
//--------------------------------------------------------------------+
|
|
void board_leds(uint32_t on_mask, uint32_t off_mask)
|
|
{
|
|
pca9532_setLeds( on_mask << 8, off_mask << 8);
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// UART
|
|
//--------------------------------------------------------------------+
|
|
#if CFG_UART_ENABLE
|
|
uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
|
|
{
|
|
return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
|
|
}
|
|
|
|
uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
|
|
{
|
|
return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
|
|
}
|
|
#endif
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* Description:
|
|
* Initialize the trim potentiometer, i.e. ADC connected to TrimPot on
|
|
* Base Board.
|
|
*
|
|
*****************************************************************************/
|
|
//void trimpot_init(void)
|
|
//{
|
|
// // pinsel for AD0.3 on p7.5
|
|
// scu_pinmux( 7 , 5 , PDN_DISABLE | PUP_DISABLE | INBUF_DISABLE, 0 );
|
|
// LPC_SCU->ENAIO0 |= (1<<3);
|
|
//
|
|
// ADC_Init(LPC_ADC0, 400000, 10);
|
|
//
|
|
// ADC_IntConfig(LPC_ADC0, ADC_ADINTEN2, DISABLE);
|
|
// ADC_ChannelCmd(LPC_ADC0, ADC_CH_TRIMPOT, ENABLE);
|
|
//}
|
|
|
|
//------------- MIC2555 external OTG transceiver on USB1 -------------//
|
|
|
|
// MIC2555 1YML = 0101111, 0YML = 0101101
|
|
//#define MIC255_ADDR BIN8(0101111)
|
|
|
|
//static uint8_t mic255_regs_read(uint8_t regs_addr)
|
|
//{
|
|
// uint8_t value;
|
|
//
|
|
// ASSERT( SUCCESS == I2C_MasterTransferData(
|
|
// LPC_I2C0,
|
|
// & (I2C_M_SETUP_Type)
|
|
// {
|
|
// .sl_addr7bit = MIC255_ADDR,
|
|
// .retransmissions_max = 3,
|
|
//
|
|
// .tx_data = ®s_addr,
|
|
// .tx_length = 1,
|
|
//
|
|
// .rx_data = &value,
|
|
// .rx_length = 1
|
|
// },
|
|
// I2C_TRANSFER_POLLING), 0xFF);
|
|
//
|
|
// return value;
|
|
//}
|
|
|
|
//static bool mic255_regs_write(uint8_t regs_addr, uint8_t data)
|
|
//{
|
|
// uint8_t xfer_data[2] = { regs_addr, data} ;
|
|
//
|
|
// ASSERT( SUCCESS == I2C_MasterTransferData(
|
|
// LPC_I2C0,
|
|
// & (I2C_M_SETUP_Type)
|
|
// {
|
|
// .sl_addr7bit = MIC255_ADDR,
|
|
// .retransmissions_max = 3,
|
|
//
|
|
// .tx_data = xfer_data,
|
|
// .tx_length = 2,
|
|
// },
|
|
// I2C_TRANSFER_POLLING), false);
|
|
//
|
|
// return true;
|
|
//}
|
|
|
|
|
|
//static uint16_t mic255_get_vendorid(void)
|
|
//{
|
|
// uint8_t vendor_low = mic255_regs_read(0);
|
|
// uint8_t vendor_high = mic255_regs_read(1);
|
|
//
|
|
// return (vendor_high << 8) | vendor_low;
|
|
//}
|
|
|
|
#endif
|