andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
705753f448f5cf3b24a6fa49ec02fe1ab0b400aa
tinyUSB/src/tusb_option.h
Alex Lisitsyn 2f0cb8b5f1 tinyusb: add support of esp32s3 target 
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00

303 lines
9.7 KiB
C
Raw Blame History

/*
* The MIT License (MIT)
*
* Copyright (c) 2019 Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#ifndef _TUSB_OPTION_H_
#define _TUSB_OPTION_H_
#define TUSB_VERSION_MAJOR 0
#define TUSB_VERSION_MINOR 9
#define TUSB_VERSION_REVISION 0
#define TUSB_VERSION_STRING TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION)
/** \defgroup group_mcu Supported MCU
* \ref CFG_TUSB_MCU must be defined to one of these
* @{ */
#define OPT_MCU_NONE 0
// LPC
#define OPT_MCU_LPC11UXX 1 ///< NXP LPC11Uxx
#define OPT_MCU_LPC13XX 2 ///< NXP LPC13xx
#define OPT_MCU_LPC15XX 3 ///< NXP LPC15xx
#define OPT_MCU_LPC175X_6X 4 ///< NXP LPC175x, LPC176x
#define OPT_MCU_LPC177X_8X 5 ///< NXP LPC177x, LPC178x
#define OPT_MCU_LPC18XX 6 ///< NXP LPC18xx
#define OPT_MCU_LPC40XX 7 ///< NXP LPC40xx
#define OPT_MCU_LPC43XX 8 ///< NXP LPC43xx
#define OPT_MCU_LPC51UXX 9 ///< NXP LPC51U6x
#define OPT_MCU_LPC54XXX 10 ///< NXP LPC54xxx
#define OPT_MCU_LPC55XX 11 ///< NXP LPC55xx
// NRF
#define OPT_MCU_NRF5X 100 ///< Nordic nRF5x series
// SAM
#define OPT_MCU_SAMD11 204 ///< MicroChip SAMD11
#define OPT_MCU_SAMD21 200 ///< MicroChip SAMD21
#define OPT_MCU_SAMD51 201 ///< MicroChip SAMD51
#define OPT_MCU_SAME5X 203 ///< MicroChip SAM E5x
#define OPT_MCU_SAMG 202 ///< MicroChip SAMDG series
#define OPT_MCU_SAML22 205 ///< MicroChip SAML22
// STM32
#define OPT_MCU_STM32F0 300 ///< ST STM32F0
#define OPT_MCU_STM32F1 301 ///< ST STM32F1
#define OPT_MCU_STM32F2 302 ///< ST STM32F2
#define OPT_MCU_STM32F3 303 ///< ST STM32F3
#define OPT_MCU_STM32F4 304 ///< ST STM32F4
#define OPT_MCU_STM32F7 305 ///< ST STM32F7
#define OPT_MCU_STM32H7 306 ///< ST STM32H7
#define OPT_MCU_STM32L0 307 ///< ST STM32L0
#define OPT_MCU_STM32L1 308 ///< ST STM32L1
#define OPT_MCU_STM32L4 309 ///< ST STM32L4
// Sony
#define OPT_MCU_CXD56 400 ///< SONY CXD56
// TI MSP430
#define OPT_MCU_MSP430x5xx 500 ///< TI MSP430x5xx
// ValentyUSB eptri
#define OPT_MCU_VALENTYUSB_EPTRI 600 ///< Fomu eptri config
// NXP iMX RT
#define OPT_MCU_MIMXRT10XX 700 ///< NXP iMX RT10xx
// Nuvoton
#define OPT_MCU_NUC121 800
#define OPT_MCU_NUC126 801
#define OPT_MCU_NUC120 802
#define OPT_MCU_NUC505 803
// Espressif
#define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2
#define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3
// Dialog
#define OPT_MCU_DA1469X 1000 ///< Dialog Semiconductor DA1469x
// Raspberry Pi
#define OPT_MCU_RP2040 1100 ///< Raspberry Pi RP2040
// NXP Kinetis
#define OPT_MCU_MKL25ZXX 1200 ///< NXP MKL25Zxx
// Silabs
#define OPT_MCU_EFM32GG 1300 ///< Silabs EFM32GG
#define OPT_MCU_EFM32GG11 1301 ///< Silabs EFM32GG11
#define OPT_MCU_EFM32GG12 1302 ///< Silabs EFM32GG12
// Renesas RX
#define OPT_MCU_RX63X 1400 ///< Renesas RX63N/631
/** @} */
/** \defgroup group_supported_os Supported RTOS
* \ref CFG_TUSB_OS must be defined to one of these
* @{ */
#define OPT_OS_NONE 1 ///< No RTOS
#define OPT_OS_FREERTOS 2 ///< FreeRTOS
#define OPT_OS_MYNEWT 3 ///< Mynewt OS
#define OPT_OS_CUSTOM 4 ///< Custom OS is implemented by application
#define OPT_OS_PICO 5 ///< Raspberry Pi Pico SDK
#define OPT_OS_RTTHREAD 6 ///< RT-Thread
/** @} */
// Allow to use command line to change the config name/location
#ifdef CFG_TUSB_CONFIG_FILE
#include CFG_TUSB_CONFIG_FILE
#else
#include "tusb_config.h"
#endif
/** \addtogroup group_configuration
* @{ */
//--------------------------------------------------------------------
// RootHub Mode Configuration
// CFG_TUSB_RHPORTx_MODE contains operation mode and speed for that port
//--------------------------------------------------------------------
// Lower 4-bit is operational mode
#define OPT_MODE_NONE 0x00 ///< Disabled
#define OPT_MODE_DEVICE 0x01 ///< Device Mode
#define OPT_MODE_HOST 0x02 ///< Host Mode
// Higher 4-bit is max operational speed (corresponding to tusb_speed_t)
#define OPT_MODE_FULL_SPEED 0x00 ///< Max Full Speed
#define OPT_MODE_LOW_SPEED 0x10 ///< Max Low Speed
#define OPT_MODE_HIGH_SPEED 0x20 ///< Max High Speed
#ifndef CFG_TUSB_RHPORT0_MODE
#define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE
#endif
#ifndef CFG_TUSB_RHPORT1_MODE
#define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE
#endif
#if (((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST ) && ((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HOST )) || \
(((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) && ((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE))
#error "TinyUSB currently does not support same modes on more than 1 roothub port"
#endif
// Which roothub port is configured as host
#define TUH_OPT_RHPORT ( ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST) ? 0 : (((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HOST) ? 1 : -1) )
#define TUSB_OPT_HOST_ENABLED ( TUH_OPT_RHPORT >= 0 )
// Which roothub port is configured as device
#define TUD_OPT_RHPORT ( ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) ? 0 : (((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE) ? 1 : -1) )
#if TUD_OPT_RHPORT == 0
#define TUD_OPT_HIGH_SPEED ( (CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HIGH_SPEED )
#else
#define TUD_OPT_HIGH_SPEED ( (CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HIGH_SPEED )
#endif
#define TUSB_OPT_DEVICE_ENABLED ( TUD_OPT_RHPORT >= 0 )
//--------------------------------------------------------------------+
// COMMON OPTIONS
//--------------------------------------------------------------------+
// Debug enable to print out error message
#ifndef CFG_TUSB_DEBUG
#define CFG_TUSB_DEBUG 0
#endif
// place data in accessible RAM for usb controller
#ifndef CFG_TUSB_MEM_SECTION
#define CFG_TUSB_MEM_SECTION
#endif
#ifndef CFG_TUSB_MEM_ALIGN
#define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4)
#endif
#ifndef CFG_TUSB_OS
#define CFG_TUSB_OS OPT_OS_NONE
#endif
//--------------------------------------------------------------------
// DEVICE OPTIONS
//--------------------------------------------------------------------
#ifndef CFG_TUD_ENDPOINT0_SIZE
#define CFG_TUD_ENDPOINT0_SIZE 64
#endif
#ifndef CFG_TUD_CDC
#define CFG_TUD_CDC 0
#endif
#ifndef CFG_TUD_MSC
#define CFG_TUD_MSC 0
#endif
#ifndef CFG_TUD_HID
#define CFG_TUD_HID 0
#endif
#ifndef CFG_TUD_AUDIO
#define CFG_TUD_AUDIO 0
#endif
#ifndef CFG_TUD_MIDI
#define CFG_TUD_MIDI 0
#endif
#ifndef CFG_TUD_VENDOR
#define CFG_TUD_VENDOR 0
#endif
#ifndef CFG_TUD_USBTMC
#define CFG_TUD_USBTMC 0
#endif
#ifndef CFG_TUD_DFU_RUNTIME
#define CFG_TUD_DFU_RUNTIME 0
#endif
#ifndef CFG_TUD_NET
#define CFG_TUD_NET 0
#endif
#ifndef CFG_TUD_BTH
#define CFG_TUD_BTH 0
#endif
//--------------------------------------------------------------------
// HOST OPTIONS
//--------------------------------------------------------------------
#if TUSB_OPT_HOST_ENABLED
#ifndef CFG_TUSB_HOST_DEVICE_MAX
#define CFG_TUSB_HOST_DEVICE_MAX 1
#warning CFG_TUSB_HOST_DEVICE_MAX is not defined, default value is 1
#endif
//------------- HUB CLASS -------------//
#if CFG_TUH_HUB && (CFG_TUSB_HOST_DEVICE_MAX == 1)
#error there is no benefit enable hub with max device is 1. Please disable hub or increase CFG_TUSB_HOST_DEVICE_MAX
#endif
//------------- HID CLASS -------------//
#define HOST_CLASS_HID ( CFG_TUH_HID_KEYBOARD + CFG_TUH_HID_MOUSE + CFG_TUSB_HOST_HID_GENERIC )
#ifndef CFG_TUSB_HOST_ENUM_BUFFER_SIZE
#define CFG_TUSB_HOST_ENUM_BUFFER_SIZE 256
#endif
//------------- CLASS -------------//
#endif // TUSB_OPT_HOST_ENABLED
//--------------------------------------------------------------------+
// Port Options
// TUP for TinyUSB Port (can be renamed)
//--------------------------------------------------------------------+
// TUP_ARCH_STRICT_ALIGN if arch cannot access unaligned memory
// ARMv7+ (M3-M7, M23-M33) can access unaligned memory
#if (defined(__ARM_ARCH) && (__ARM_ARCH >= 7))
#define TUP_ARCH_STRICT_ALIGN 0
#else
#define TUP_ARCH_STRICT_ALIGN 1
#endif
//------------------------------------------------------------------
// Configuration Validation
//------------------------------------------------------------------
#if CFG_TUD_ENDPOINT0_SIZE > 64
#error Control Endpoint Max Packet Size cannot be larger than 64
#endif
#endif /* _TUSB_OPTION_H_ */
/** @} */
Reference in New Issue View Git Blame Copy Permalink