263 lines
8.7 KiB
C
263 lines
8.7 KiB
C
/*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*
|
|
* This file is part of the TinyUSB stack.
|
|
*/
|
|
|
|
/* metadata:
|
|
name: STM32 H7S3L8 Nucleo
|
|
url: https://www.st.com/en/evaluation-tools/nucleo-h7s3l8.html
|
|
*/
|
|
|
|
#ifndef BOARD_H_
|
|
#define BOARD_H_
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include "tcpp0203.h"
|
|
#include "stm32h7rsxx_ll_exti.h"
|
|
#include "stm32h7rsxx_ll_system.h"
|
|
|
|
#define UART_DEV USART3
|
|
#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE
|
|
|
|
// VBUS Sense detection
|
|
#define OTG_FS_VBUS_SENSE 1
|
|
#define OTG_HS_VBUS_SENSE 0
|
|
|
|
#define PINID_LED 0
|
|
#define PINID_BUTTON 1
|
|
#define PINID_UART_TX 2
|
|
#define PINID_UART_RX 3
|
|
#define PINID_TCPP0203_EN 4
|
|
|
|
static board_pindef_t board_pindef[] = {
|
|
{ // LED
|
|
.port = GPIOD,
|
|
.pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 },
|
|
.active_state = 1
|
|
},
|
|
{ // Button
|
|
.port = GPIOC,
|
|
.pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 },
|
|
.active_state = 1
|
|
},
|
|
{ // UART TX
|
|
.port = GPIOD,
|
|
.pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART3 },
|
|
.active_state = 0
|
|
},
|
|
{ // UART RX
|
|
.port = GPIOD,
|
|
.pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART3 },
|
|
.active_state = 0
|
|
},
|
|
{ // VBUS input pin used for TCPP0203 EN
|
|
.port = GPIOM,
|
|
.pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 },
|
|
.active_state = 0
|
|
},
|
|
{ // I2C SCL for TCPP0203
|
|
.port = GPIOA,
|
|
.pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF4_I2C3 },
|
|
},
|
|
{ // I2C SDA for TCPP0203
|
|
.port = GPIOA,
|
|
.pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF4_I2C3 },
|
|
},
|
|
{ // INT for TCPP0203
|
|
.port = GPIOM,
|
|
.pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 },
|
|
},
|
|
};
|
|
|
|
//--------------------------------------------------------------------+
|
|
// RCC Clock
|
|
//--------------------------------------------------------------------+
|
|
static inline void SystemClock_Config(void)
|
|
{
|
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
|
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_CSI;
|
|
RCC_OscInitStruct.CSIState = RCC_CSI_ON;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/** Configure the main internal regulator output voltage
|
|
*/
|
|
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE0) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/** Initializes the RCC Oscillators according to the specified parameters
|
|
* in the RCC_OscInitTypeDef structure.
|
|
*/
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.PLL1.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL1.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL1.PLLM = 12;
|
|
RCC_OscInitStruct.PLL1.PLLN = 300;
|
|
RCC_OscInitStruct.PLL1.PLLP = 1;
|
|
RCC_OscInitStruct.PLL1.PLLQ = 2;
|
|
RCC_OscInitStruct.PLL1.PLLR = 2;
|
|
RCC_OscInitStruct.PLL1.PLLS = 2;
|
|
RCC_OscInitStruct.PLL1.PLLT = 2;
|
|
RCC_OscInitStruct.PLL1.PLLFractional = 0;
|
|
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL2.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL2.PLLM = 12;
|
|
RCC_OscInitStruct.PLL2.PLLN = 200;
|
|
RCC_OscInitStruct.PLL2.PLLP = 2;
|
|
RCC_OscInitStruct.PLL2.PLLQ = 2;
|
|
RCC_OscInitStruct.PLL2.PLLR = 2;
|
|
RCC_OscInitStruct.PLL2.PLLS = 2;
|
|
RCC_OscInitStruct.PLL2.PLLT = 2;
|
|
RCC_OscInitStruct.PLL2.PLLFractional = 0;
|
|
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/** Initializes the CPU, AHB and APB buses clocks
|
|
*/
|
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
|
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
|
|RCC_CLOCKTYPE_PCLK4|RCC_CLOCKTYPE_PCLK5;
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
|
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
|
RCC_ClkInitStruct.APB5CLKDivider = RCC_APB5_DIV2;
|
|
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USBPHYC;
|
|
PeriphClkInit.UsbPhycClockSelection = RCC_USBPHYCCLKSOURCE_HSE;
|
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
__HAL_RCC_SBS_CLK_ENABLE();
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// USB PD
|
|
//--------------------------------------------------------------------+
|
|
static I2C_HandleTypeDef i2c_handle = {
|
|
.Instance = I2C3,
|
|
.Init = {
|
|
.Timing = 0x20C0EDFF,
|
|
.OwnAddress1 = 0,
|
|
.AddressingMode = I2C_ADDRESSINGMODE_7BIT,
|
|
.DualAddressMode = I2C_DUALADDRESS_DISABLE,
|
|
.OwnAddress2 = 0,
|
|
.OwnAddress2Masks = I2C_OA2_NOMASK,
|
|
.GeneralCallMode = I2C_GENERALCALL_DISABLE,
|
|
.NoStretchMode = I2C_NOSTRETCH_DISABLE,
|
|
}
|
|
};
|
|
static TCPP0203_Object_t tcpp0203_obj = { 0 };
|
|
|
|
int32_t board_tcpp0203_init(void) {
|
|
board_pindef_t* pindef = &board_pindef[PINID_TCPP0203_EN];
|
|
HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, GPIO_PIN_SET);
|
|
|
|
__HAL_RCC_I2C3_CLK_ENABLE();
|
|
__HAL_RCC_I2C3_FORCE_RESET();
|
|
__HAL_RCC_I2C3_RELEASE_RESET();
|
|
if (HAL_I2C_Init(&i2c_handle) != HAL_OK) {
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
NVIC_SetPriority(EXTI8_IRQn, 12);
|
|
NVIC_EnableIRQ(EXTI8_IRQn);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int32_t board_tcpp0203_deinit(void) {
|
|
return 0;
|
|
}
|
|
|
|
int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) {
|
|
TU_ASSERT (HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000));
|
|
return 0;
|
|
}
|
|
|
|
int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) {
|
|
TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000));
|
|
return 0;
|
|
}
|
|
|
|
static inline void board_init2(void) {
|
|
TCPP0203_IO_t io_ctx;
|
|
|
|
io_ctx.Address = TCPP0203_I2C_ADDRESS_X68;
|
|
io_ctx.Init = board_tcpp0203_init;
|
|
io_ctx.DeInit = board_tcpp0203_deinit;
|
|
io_ctx.ReadReg = i2c_readreg;
|
|
io_ctx.WriteReg = i2c_writereg;
|
|
|
|
TU_ASSERT(TCPP0203_RegisterBusIO(&tcpp0203_obj, &io_ctx) == TCPP0203_OK, );
|
|
|
|
TU_ASSERT(TCPP0203_Init(&tcpp0203_obj) == TCPP0203_OK, );
|
|
|
|
TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, );
|
|
}
|
|
|
|
void board_vbus_set(uint8_t rhport, bool state) {
|
|
(void) state;
|
|
if (rhport == 1) {
|
|
TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, );
|
|
}
|
|
}
|
|
|
|
void EXTI8_IRQHandler(void) {
|
|
__HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_8);
|
|
if (tcpp0203_obj.IsInitialized) {
|
|
TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, );
|
|
TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, );
|
|
}
|
|
}
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif
|