472 lines
16 KiB
C
472 lines
16 KiB
C
/*
|
|
* @brief LPC11u6x GPIO driver
|
|
*
|
|
* @note
|
|
* Copyright(C) NXP Semiconductors, 2013
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Software that is described herein is for illustrative purposes only
|
|
* which provides customers with programming information regarding the
|
|
* LPC products. This software is supplied "AS IS" without any warranties of
|
|
* any kind, and NXP Semiconductors and its licensor disclaim any and
|
|
* all warranties, express or implied, including all implied warranties of
|
|
* merchantability, fitness for a particular purpose and non-infringement of
|
|
* intellectual property rights. NXP Semiconductors assumes no responsibility
|
|
* or liability for the use of the software, conveys no license or rights under any
|
|
* patent, copyright, mask work right, or any other intellectual property rights in
|
|
* or to any products. NXP Semiconductors reserves the right to make changes
|
|
* in the software without notification. NXP Semiconductors also makes no
|
|
* representation or warranty that such application will be suitable for the
|
|
* specified use without further testing or modification.
|
|
*
|
|
* @par
|
|
* Permission to use, copy, modify, and distribute this software and its
|
|
* documentation is hereby granted, under NXP Semiconductors' and its
|
|
* licensor's relevant copyrights in the software, without fee, provided that it
|
|
* is used in conjunction with NXP Semiconductors microcontrollers. This
|
|
* copyright, permission, and disclaimer notice must appear in all copies of
|
|
* this code.
|
|
*/
|
|
|
|
#ifndef __GPIO_11U6X_H_
|
|
#define __GPIO_11U6X_H_
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** @defgroup GPIO_11U6X CHIP: LPC11u6x GPIO driver
|
|
* @ingroup CHIP_11U6X_Drivers
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief GPIO port register block structure
|
|
*/
|
|
typedef struct { /*!< GPIO_PORT Structure */
|
|
__IO uint8_t B[128][32]; /*!< Offset 0x0000: Byte pin registers ports 0 to n; pins PIOn_0 to PIOn_31 */
|
|
__IO uint32_t W[32][32]; /*!< Offset 0x1000: Word pin registers port 0 to n */
|
|
__IO uint32_t DIR[32]; /*!< Offset 0x2000: Direction registers port n */
|
|
__IO uint32_t MASK[32]; /*!< Offset 0x2080: Mask register port n */
|
|
__IO uint32_t PIN[32]; /*!< Offset 0x2100: Portpin register port n */
|
|
__IO uint32_t MPIN[32]; /*!< Offset 0x2180: Masked port register port n */
|
|
__IO uint32_t SET[32]; /*!< Offset 0x2200: Write: Set register for port n Read: output bits for port n */
|
|
__O uint32_t CLR[32]; /*!< Offset 0x2280: Clear port n */
|
|
__O uint32_t NOT[32]; /*!< Offset 0x2300: Toggle port n */
|
|
} LPC_GPIO_T;
|
|
|
|
/**
|
|
* @brief Initialize GPIO block
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
void Chip_GPIO_Init(LPC_GPIO_T *pGPIO);
|
|
|
|
/**
|
|
* @brief De-Initialize GPIO block
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
void Chip_GPIO_DeInit(LPC_GPIO_T *pGPIO);
|
|
|
|
/**
|
|
* @brief Set a GPIO port/bit state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO port to set
|
|
* @param pin : GPIO pin to set
|
|
* @param setting : true for high, false for low
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_WritePortBit(LPC_GPIO_T *pGPIO, uint32_t port, uint8_t pin, bool setting)
|
|
{
|
|
pGPIO->B[port][pin] = setting;
|
|
}
|
|
|
|
/**
|
|
* @brief Set a GPIO pin state via the GPIO byte register
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pin : GPIO pin to set
|
|
* @param setting : true for high, false for low
|
|
* @return Nothing
|
|
* @note This function replaces Chip_GPIO_WritePortBit()
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPinState(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin, bool setting)
|
|
{
|
|
pGPIO->B[port][pin] = setting;
|
|
}
|
|
|
|
/**
|
|
* @brief Read a GPIO state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO port to read
|
|
* @param pin : GPIO pin to read
|
|
* @return true of the GPIO is high, false if low
|
|
* @note It is recommended to use the Chip_GPIO_GetPinState() function instead.
|
|
*/
|
|
STATIC INLINE bool Chip_GPIO_ReadPortBit(LPC_GPIO_T *pGPIO, uint32_t port, uint8_t pin)
|
|
{
|
|
return (bool) pGPIO->B[port][pin];
|
|
}
|
|
|
|
/**
|
|
* @brief Get a GPIO pin state via the GPIO byte register
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pin : GPIO pin to get state for
|
|
* @return true if the GPIO is high, false if low
|
|
* @note This function replaces Chip_GPIO_ReadPortBit()
|
|
*/
|
|
STATIC INLINE bool Chip_GPIO_GetPinState(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
|
|
{
|
|
return (bool) pGPIO->B[port][pin];
|
|
}
|
|
|
|
/**
|
|
* @brief Set a GPIO direction
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO port to set
|
|
* @param bit : GPIO bit to set
|
|
* @param setting : true for output, false for input
|
|
* @return Nothing
|
|
* @note It is recommended to use the Chip_GPIO_SetPinDIROutput(),
|
|
* Chip_GPIO_SetPinDIRInput() or Chip_GPIO_SetPinDIR() functions instead
|
|
* of this function.
|
|
*/
|
|
void Chip_GPIO_WriteDirBit(LPC_GPIO_T *pGPIO, uint32_t port, uint8_t bit, bool setting);
|
|
|
|
/**
|
|
* @brief Set GPIO direction for a single GPIO pin to an output
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pin : GPIO pin to set direction on as output
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPinDIROutput(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
|
|
{
|
|
pGPIO->DIR[port] |= 1UL << pin;
|
|
}
|
|
|
|
/**
|
|
* @brief Set GPIO direction for a single GPIO pin to an input
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pin : GPIO pin to set direction on as input
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPinDIRInput(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
|
|
{
|
|
pGPIO->DIR[port] &= ~(1UL << pin);
|
|
}
|
|
|
|
/**
|
|
* @brief Set GPIO direction for a single GPIO pin
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pin : GPIO pin to set direction for
|
|
* @param output : true for output, false for input
|
|
* @return Nothing
|
|
*/
|
|
void Chip_GPIO_SetPinDIR(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin, bool output);
|
|
|
|
/**
|
|
* @brief Read a GPIO direction (out or in)
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO port to read
|
|
* @param bit : GPIO bit to read
|
|
* @return true of the GPIO is an output, false if input
|
|
* @note It is recommended to use the Chip_GPIO_GetPinDIR() function instead.
|
|
*/
|
|
STATIC INLINE bool Chip_GPIO_ReadDirBit(LPC_GPIO_T *pGPIO, uint32_t port, uint8_t bit)
|
|
{
|
|
return (bool) (((pGPIO->DIR[port]) >> bit) & 1);
|
|
}
|
|
|
|
/**
|
|
* @brief Get GPIO direction for a single GPIO pin
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pin : GPIO pin to get direction for
|
|
* @return true if the GPIO is an output, false if input
|
|
*/
|
|
STATIC INLINE bool Chip_GPIO_GetPinDIR(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
|
|
{
|
|
return (bool) (((pGPIO->DIR[port]) >> pin) & 1);
|
|
}
|
|
|
|
/**
|
|
* @brief Set Direction for a GPIO port
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param portNum : port Number
|
|
* @param bitValue : GPIO bit to set
|
|
* @param out : Direction value, 0 = input, !0 = output
|
|
* @return None
|
|
* @note Bits set to '0' are not altered. It is recommended to use the
|
|
* Chip_GPIO_SetPortDIR() function instead.
|
|
*/
|
|
void Chip_GPIO_SetDir(LPC_GPIO_T *pGPIO, uint8_t portNum, uint32_t bitValue, uint8_t out);
|
|
|
|
/**
|
|
* @brief Set GPIO direction for a all selected GPIO pins to an output
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pinMask : GPIO pin mask to set direction on as output (bits 0..b for pins 0..n)
|
|
* @return Nothing
|
|
* @note Sets multiple GPIO pins to the output direction, each bit's position that is
|
|
* high sets the corresponding pin number for that bit to an output.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPortDIROutput(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pinMask)
|
|
{
|
|
pGPIO->DIR[port] |= pinMask;
|
|
}
|
|
|
|
/**
|
|
* @brief Set GPIO direction for a all selected GPIO pins to an input
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pinMask : GPIO pin mask to set direction on as input (bits 0..b for pins 0..n)
|
|
* @return Nothing
|
|
* @note Sets multiple GPIO pins to the input direction, each bit's position that is
|
|
* high sets the corresponding pin number for that bit to an input.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPortDIRInput(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pinMask)
|
|
{
|
|
pGPIO->DIR[port] &= ~pinMask;
|
|
}
|
|
|
|
/**
|
|
* @brief Set GPIO direction for a all selected GPIO pins to an input or output
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pinMask : GPIO pin mask to set direction on (bits 0..b for pins 0..n)
|
|
* @param outSet : Direction value, false = set as inputs, true = set as outputs
|
|
* @return Nothing
|
|
* @note Sets multiple GPIO pins to the input direction, each bit's position that is
|
|
* high sets the corresponding pin number for that bit to an input.
|
|
*/
|
|
void Chip_GPIO_SetPortDIR(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pinMask, bool outSet);
|
|
|
|
/**
|
|
* @brief Get GPIO direction for a all GPIO pins
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @return a bitfield containing the input and output states for each pin
|
|
* @note For pins 0..n, a high state in a bit corresponds to an output state for the
|
|
* same pin, while a low state corresponds to an input state.
|
|
*/
|
|
STATIC INLINE uint32_t Chip_GPIO_GetPortDIR(LPC_GPIO_T *pGPIO, uint8_t port)
|
|
{
|
|
return pGPIO->DIR[port];
|
|
}
|
|
|
|
/**
|
|
* @brief Set GPIO port mask value for GPIO masked read and write
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : port Number
|
|
* @param mask : Mask value for read and write (only low bits are enabled)
|
|
* @return Nothing
|
|
* @note Controls which bits are set or unset when using the masked
|
|
* GPIO read and write functions. A low state indicates the pin is settable
|
|
* and readable via the masked write and read functions.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPortMask(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t mask)
|
|
{
|
|
pGPIO->MASK[port] = mask;
|
|
}
|
|
|
|
/**
|
|
* @brief Get GPIO port mask value used for GPIO masked read and write
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : port Number
|
|
* @return Returns value set with the Chip_GPIO_SetPortMask() function.
|
|
* @note A high bit in the return value indicates that that GPIO pin for the
|
|
* port cannot be set using the masked write function.
|
|
*/
|
|
STATIC INLINE uint32_t Chip_GPIO_GetPortMask(LPC_GPIO_T *pGPIO, uint8_t port)
|
|
{
|
|
return pGPIO->MASK[port];
|
|
}
|
|
|
|
/**
|
|
* @brief Set all GPIO raw pin states (regardless of masking)
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param value : Value to set all GPIO pin states (0..n) to
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPortValue(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t value)
|
|
{
|
|
pGPIO->PIN[port] = value;
|
|
}
|
|
|
|
/**
|
|
* @brief Get all GPIO raw pin states (regardless of masking)
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @return Current (raw) state of all GPIO pins
|
|
*/
|
|
STATIC INLINE uint32_t Chip_GPIO_GetPortValue(LPC_GPIO_T *pGPIO, uint8_t port)
|
|
{
|
|
return pGPIO->PIN[port];
|
|
}
|
|
|
|
/**
|
|
* @brief Set all GPIO pin states, but mask via the MASKP0 register
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param value : Value to set all GPIO pin states (0..n) to
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetMaskedPortValue(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t value)
|
|
{
|
|
pGPIO->MPIN[port] = value;
|
|
}
|
|
|
|
/**
|
|
* @brief Get all GPIO pin statesm but mask via the MASKP0 register
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @return Current (masked) state of all GPIO pins
|
|
*/
|
|
STATIC INLINE uint32_t Chip_GPIO_GetMaskedPortValue(LPC_GPIO_T *pGPIO, uint8_t port)
|
|
{
|
|
return pGPIO->MPIN[port];
|
|
}
|
|
|
|
/**
|
|
* @brief Set a GPIO port/bit to the high state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param portNum : port number
|
|
* @param bitValue : bit(s) in the port to set high
|
|
* @return None
|
|
* @note Any bit set as a '0' will not have it's state changed. This only
|
|
* applies to ports configured as an output. It is recommended to use the
|
|
* Chip_GPIO_SetPortOutHigh() function instead.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetValue(LPC_GPIO_T *pGPIO, uint8_t portNum, uint32_t bitValue)
|
|
{
|
|
pGPIO->SET[portNum] = bitValue;
|
|
}
|
|
|
|
/**
|
|
* @brief Set selected GPIO output pins to the high state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pins : pins (0..n) to set high
|
|
* @return None
|
|
* @note Any bit set as a '0' will not have it's state changed. This only
|
|
* applies to ports configured as an output.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPortOutHigh(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pins)
|
|
{
|
|
pGPIO->SET[port] = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Set an individual GPIO output pin to the high state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip'
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pin : pin number (0..n) to set high
|
|
* @return None
|
|
* @note Any bit set as a '0' will not have it's state changed. This only
|
|
* applies to ports configured as an output.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPinOutHigh(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
|
|
{
|
|
pGPIO->SET[port] = (1 << pin);
|
|
}
|
|
|
|
/**
|
|
* @brief Set a GPIO port/bit to the low state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param portNum : port number
|
|
* @param bitValue : bit(s) in the port to set low
|
|
* @return None
|
|
* @note Any bit set as a '0' will not have it's state changed. This only
|
|
* applies to ports configured as an output.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_ClearValue(LPC_GPIO_T *pGPIO, uint8_t portNum, uint32_t bitValue)
|
|
{
|
|
pGPIO->CLR[portNum] = bitValue;
|
|
}
|
|
|
|
/**
|
|
* @brief Set selected GPIO output pins to the low state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pins : pins (0..n) to set low
|
|
* @return None
|
|
* @note Any bit set as a '0' will not have it's state changed. This only
|
|
* applies to ports configured as an output.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPortOutLow(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pins)
|
|
{
|
|
pGPIO->CLR[port] = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Set an individual GPIO output pin to the low state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pin : pin number (0..n) to set low
|
|
* @return None
|
|
* @note Any bit set as a '0' will not have it's state changed. This only
|
|
* applies to ports configured as an output.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPinOutLow(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
|
|
{
|
|
pGPIO->CLR[port] = (1 << pin);
|
|
}
|
|
|
|
/**
|
|
* @brief Toggle selected GPIO output pins to the opposite state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pins : pins (0..n) to toggle
|
|
* @return None
|
|
* @note Any bit set as a '0' will not have it's state changed. This only
|
|
* applies to ports configured as an output.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPortToggle(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pins)
|
|
{
|
|
pGPIO->NOT[port] = pins;
|
|
}
|
|
|
|
/**
|
|
* @brief Toggle an individual GPIO output pin to the opposite state
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param port : GPIO Port number where @a pin is located
|
|
* @param pin : pin number (0..n) to toggle
|
|
* @return None
|
|
* @note Any bit set as a '0' will not have it's state changed. This only
|
|
* applies to ports configured as an output.
|
|
*/
|
|
STATIC INLINE void Chip_GPIO_SetPinToggle(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
|
|
{
|
|
pGPIO->NOT[port] = (1 << pin);
|
|
}
|
|
|
|
/**
|
|
* @brief Read current bit states for the selected port
|
|
* @param pGPIO : The base of GPIO peripheral on the chip
|
|
* @param portNum : port number to read
|
|
* @return Current value of GPIO port
|
|
* @note The current states of the bits for the port are read, regardless of
|
|
* whether the GPIO port bits are input or output.
|
|
*/
|
|
STATIC INLINE uint32_t Chip_GPIO_ReadValue(LPC_GPIO_T *pGPIO, uint8_t portNum)
|
|
{
|
|
return pGPIO->PIN[portNum];
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __GPIO_11U6X_H_ */
|