210 lines
6.8 KiB
C
210 lines
6.8 KiB
C
/*
|
|
* @brief LPC13xx GPIO group driver
|
|
*
|
|
* @note
|
|
* Copyright(C) NXP Semiconductors, 2013
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Software that is described herein is for illustrative purposes only
|
|
* which provides customers with programming information regarding the
|
|
* LPC products. This software is supplied "AS IS" without any warranties of
|
|
* any kind, and NXP Semiconductors and its licensor disclaim any and
|
|
* all warranties, express or implied, including all implied warranties of
|
|
* merchantability, fitness for a particular purpose and non-infringement of
|
|
* intellectual property rights. NXP Semiconductors assumes no responsibility
|
|
* or liability for the use of the software, conveys no license or rights under any
|
|
* patent, copyright, mask work right, or any other intellectual property rights in
|
|
* or to any products. NXP Semiconductors reserves the right to make changes
|
|
* in the software without notification. NXP Semiconductors also makes no
|
|
* representation or warranty that such application will be suitable for the
|
|
* specified use without further testing or modification.
|
|
*
|
|
* @par
|
|
* Permission to use, copy, modify, and distribute this software and its
|
|
* documentation is hereby granted, under NXP Semiconductors' and its
|
|
* licensor's relevant copyrights in the software, without fee, provided that it
|
|
* is used in conjunction with NXP Semiconductors microcontrollers. This
|
|
* copyright, permission, and disclaimer notice must appear in all copies of
|
|
* this code.
|
|
*/
|
|
|
|
#ifndef __GPIOGROUP_13XX_H_
|
|
#define __GPIOGROUP_13XX_H_
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** @defgroup GPIOGP_13XX CHIP: LPC13xx GPIO group driver
|
|
* @ingroup CHIP_13XX_Drivers
|
|
* @{
|
|
*/
|
|
|
|
#if defined(CHIP_LPC1347)
|
|
|
|
/**
|
|
* @brief GPIO grouped interrupt register block structure
|
|
*/
|
|
typedef struct { /*!< GPIO_GROUP_INTn Structure */
|
|
__IO uint32_t CTRL; /*!< GPIO grouped interrupt control register */
|
|
__I uint32_t RESERVED0[7];
|
|
__IO uint32_t PORT_POL[8]; /*!< GPIO grouped interrupt port polarity register */
|
|
__IO uint32_t PORT_ENA[8]; /*!< GPIO grouped interrupt port m enable register */
|
|
uint32_t RESERVED1[1000];
|
|
} LPC_GPIOGROUPINT_T;
|
|
|
|
/**
|
|
* LPC13xx GPIO group bit definitions
|
|
*/
|
|
#define GPIOGR_INT (1 << 0) /*!< GPIO interrupt pending/clear bit */
|
|
#define GPIOGR_COMB (1 << 1) /*!< GPIO interrupt OR(0)/AND(1) mode bit */
|
|
#define GPIOGR_TRIG (1 << 2) /*!< GPIO interrupt edge(0)/level(1) mode bit */
|
|
|
|
/**
|
|
* @brief Clear interrupt pending status for the selected group
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @return None
|
|
*/
|
|
STATIC INLINE void Chip_GPIOGP_ClearIntStatus(LPC_GPIOGROUPINT_T *pGPIOGPINT, uint8_t group)
|
|
{
|
|
uint32_t temp;
|
|
|
|
temp = pGPIOGPINT[group].CTRL;
|
|
pGPIOGPINT[group].CTRL = temp | GPIOGR_INT;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns current GPIO group inetrrupt pending status
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @return true if the group interrupt is pending, otherwise false.
|
|
*/
|
|
STATIC INLINE bool Chip_GPIOGP_GetIntStatus(LPC_GPIOGROUPINT_T *pGPIOGPINT, uint8_t group)
|
|
{
|
|
return (bool) ((pGPIOGPINT[group].CTRL & GPIOGR_INT) != 0);
|
|
}
|
|
|
|
/**
|
|
* @brief Selected GPIO group functionality for trigger on any pin in group (OR mode)
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @return None
|
|
*/
|
|
STATIC INLINE void Chip_GPIOGP_SelectOrMode(LPC_GPIOGROUPINT_T *pGPIOGPINT, uint8_t group)
|
|
{
|
|
pGPIOGPINT[group].CTRL &= ~GPIOGR_COMB;
|
|
}
|
|
|
|
/**
|
|
* @brief Selected GPIO group functionality for trigger on all matching pins in group (AND mode)
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @return None
|
|
*/
|
|
STATIC INLINE void Chip_GPIOGP_SelectAndMode(LPC_GPIOGROUPINT_T *pGPIOGPINT, uint8_t group)
|
|
{
|
|
pGPIOGPINT[group].CTRL |= GPIOGR_COMB;
|
|
}
|
|
|
|
/**
|
|
* @brief Selected GPIO group functionality edge trigger mode
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @return None
|
|
*/
|
|
STATIC INLINE void Chip_GPIOGP_SelectEdgeMode(LPC_GPIOGROUPINT_T *pGPIOGPINT, uint8_t group)
|
|
{
|
|
pGPIOGPINT[group].CTRL &= ~GPIOGR_TRIG;
|
|
}
|
|
|
|
/**
|
|
* @brief Selected GPIO group functionality level trigger mode
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @return None
|
|
*/
|
|
STATIC INLINE void Chip_GPIOGP_SelectLevelMode(LPC_GPIOGROUPINT_T *pGPIOGPINT, uint8_t group)
|
|
{
|
|
pGPIOGPINT[group].CTRL |= GPIOGR_TRIG;
|
|
}
|
|
|
|
/**
|
|
* @brief Set selected pins for the group and port to low level trigger
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @param port : GPIO port number
|
|
* @param pinMask : Or'ed value of pins to select for low level (bit 0 = pin 0, 1 = pin1, etc.)
|
|
* @return None
|
|
*/
|
|
STATIC INLINE void Chip_GPIOGP_SelectLowLevel(LPC_GPIOGROUPINT_T *pGPIOGPINT,
|
|
uint8_t group,
|
|
uint8_t port,
|
|
uint32_t pinMask)
|
|
{
|
|
pGPIOGPINT[group].PORT_POL[port] &= ~pinMask;
|
|
}
|
|
|
|
/**
|
|
* @brief Set selected pins for the group and port to high level trigger
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @param port : GPIO port number
|
|
* @param pinMask : Or'ed value of pins to select for high level (bit 0 = pin 0, 1 = pin1, etc.)
|
|
* @return None
|
|
*/
|
|
STATIC INLINE void Chip_GPIOGP_SelectHighLevel(LPC_GPIOGROUPINT_T *pGPIOGPINT,
|
|
uint8_t group,
|
|
uint8_t port,
|
|
uint32_t pinMask)
|
|
{
|
|
pGPIOGPINT[group].PORT_POL[port] |= pinMask;
|
|
}
|
|
|
|
/**
|
|
* @brief Disabled selected pins for the group interrupt
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @param port : GPIO port number
|
|
* @param pinMask : Or'ed value of pins to disable interrupt for (bit 0 = pin 0, 1 = pin1, etc.)
|
|
* @return None
|
|
* @note Disabled pins do not contrinute to the group interrupt.
|
|
*/
|
|
STATIC INLINE void Chip_GPIOGP_DisableGroupPins(LPC_GPIOGROUPINT_T *pGPIOGPINT,
|
|
uint8_t group,
|
|
uint8_t port,
|
|
uint32_t pinMask)
|
|
{
|
|
pGPIOGPINT[group].PORT_ENA[port] &= ~pinMask;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable selected pins for the group interrupt
|
|
* @param pGPIOGPINT : Pointer to GPIO group register block
|
|
* @param group : GPIO group number
|
|
* @param port : GPIO port number
|
|
* @param pinMask : Or'ed value of pins to enable interrupt for (bit 0 = pin 0, 1 = pin1, etc.)
|
|
* @return None
|
|
* @note Enabled pins contribute to the group interrupt.
|
|
*/
|
|
STATIC INLINE void Chip_GPIOGP_EnableGroupPins(LPC_GPIOGROUPINT_T *pGPIOGPINT,
|
|
uint8_t group,
|
|
uint8_t port,
|
|
uint32_t pinMask)
|
|
{
|
|
pGPIOGPINT[group].PORT_ENA[port] |= pinMask;
|
|
}
|
|
|
|
#endif /* defined(CHIP_LPC1347) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __GPIOGROUP_13XX_H_ */
|