762 lines
27 KiB
C
762 lines
27 KiB
C
/**
|
|
******************************************************************************
|
|
* @file system_stm32f4xx.c
|
|
* @author MCD Application Team
|
|
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
|
|
*
|
|
* This file provides two functions and one global variable to be called from
|
|
* user application:
|
|
* - SystemInit(): This function is called at startup just after reset and
|
|
* before branch to main program. This call is made inside
|
|
* the "startup_stm32f4xx.s" file.
|
|
*
|
|
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
|
* by the user application to setup the SysTick
|
|
* timer or configure other parameters.
|
|
*
|
|
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
|
* be called whenever the core clock is changed
|
|
* during program execution.
|
|
*
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/** @addtogroup CMSIS
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup stm32f4xx_system
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Includes
|
|
* @{
|
|
*/
|
|
|
|
|
|
#include "stm32f4xx.h"
|
|
|
|
#if !defined (HSE_VALUE)
|
|
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
|
|
#endif /* HSE_VALUE */
|
|
|
|
#if !defined (HSI_VALUE)
|
|
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
|
#endif /* HSI_VALUE */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Defines
|
|
* @{
|
|
*/
|
|
|
|
/************************* Miscellaneous Configuration ************************/
|
|
/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
|
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
|
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
|
/* #define DATA_IN_ExtSRAM */
|
|
#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
|
|
STM32F412Zx || STM32F412Vx */
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
|
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
/* #define DATA_IN_ExtSDRAM */
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
|
|
STM32F479xx */
|
|
|
|
/*!< Uncomment the following line if you need to relocate your vector Table in
|
|
Internal SRAM. */
|
|
/* #define VECT_TAB_SRAM */
|
|
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
|
|
This value must be a multiple of 0x200. */
|
|
/******************************************************************************/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Variables
|
|
* @{
|
|
*/
|
|
/* This variable is updated in three ways:
|
|
1) by calling CMSIS function SystemCoreClockUpdate()
|
|
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
|
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
|
Note: If you use this function to configure the system clock; then there
|
|
is no need to call the 2 first functions listed above, since SystemCoreClock
|
|
variable is updated automatically.
|
|
*/
|
|
uint32_t SystemCoreClock = 16000000;
|
|
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
|
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
|
|
* @{
|
|
*/
|
|
|
|
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
|
static void SystemInit_ExtMemCtl(void);
|
|
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Setup the microcontroller system
|
|
* Initialize the FPU setting, vector table location and External memory
|
|
* configuration.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemInit(void)
|
|
{
|
|
/* FPU settings ------------------------------------------------------------*/
|
|
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
|
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
|
#endif
|
|
/* Reset the RCC clock configuration to the default reset state ------------*/
|
|
/* Set HSION bit */
|
|
RCC->CR |= (uint32_t)0x00000001;
|
|
|
|
/* Reset CFGR register */
|
|
RCC->CFGR = 0x00000000;
|
|
|
|
/* Reset HSEON, CSSON and PLLON bits */
|
|
RCC->CR &= (uint32_t)0xFEF6FFFF;
|
|
|
|
/* Reset PLLCFGR register */
|
|
RCC->PLLCFGR = 0x24003010;
|
|
|
|
/* Reset HSEBYP bit */
|
|
RCC->CR &= (uint32_t)0xFFFBFFFF;
|
|
|
|
/* Disable all interrupts */
|
|
RCC->CIR = 0x00000000;
|
|
|
|
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
|
SystemInit_ExtMemCtl();
|
|
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
|
|
|
/* Configure the Vector Table location add offset address ------------------*/
|
|
#ifdef VECT_TAB_SRAM
|
|
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
|
#else
|
|
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
|
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
|
* be used by the user application to setup the SysTick timer or configure
|
|
* other parameters.
|
|
*
|
|
* @note Each time the core clock (HCLK) changes, this function must be called
|
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
|
* based on this variable will be incorrect.
|
|
*
|
|
* @note - The system frequency computed by this function is not the real
|
|
* frequency in the chip. It is calculated based on the predefined
|
|
* constant and the selected clock source:
|
|
*
|
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
|
*
|
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
|
*
|
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
|
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
|
*
|
|
* (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
|
|
* 16 MHz) but the real value may vary depending on the variations
|
|
* in voltage and temperature.
|
|
*
|
|
* (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
|
|
* depends on the application requirements), user has to ensure that HSE_VALUE
|
|
* is same as the real frequency of the crystal used. Otherwise, this function
|
|
* may have wrong result.
|
|
*
|
|
* - The result of this function could be not correct when using fractional
|
|
* value for HSE crystal.
|
|
*
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemCoreClockUpdate(void)
|
|
{
|
|
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
|
|
|
|
/* Get SYSCLK source -------------------------------------------------------*/
|
|
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
|
|
|
switch (tmp)
|
|
{
|
|
case 0x00: /* HSI used as system clock source */
|
|
SystemCoreClock = HSI_VALUE;
|
|
break;
|
|
case 0x04: /* HSE used as system clock source */
|
|
SystemCoreClock = HSE_VALUE;
|
|
break;
|
|
case 0x08: /* PLL used as system clock source */
|
|
|
|
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
|
|
SYSCLK = PLL_VCO / PLL_P
|
|
*/
|
|
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
|
|
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
|
|
|
|
if (pllsource != 0)
|
|
{
|
|
/* HSE used as PLL clock source */
|
|
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
|
}
|
|
else
|
|
{
|
|
/* HSI used as PLL clock source */
|
|
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
|
}
|
|
|
|
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
|
SystemCoreClock = pllvco/pllp;
|
|
break;
|
|
default:
|
|
SystemCoreClock = HSI_VALUE;
|
|
break;
|
|
}
|
|
/* Compute HCLK frequency --------------------------------------------------*/
|
|
/* Get HCLK prescaler */
|
|
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
|
/* HCLK frequency */
|
|
SystemCoreClock >>= tmp;
|
|
}
|
|
|
|
#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
|
|| defined(STM32F469xx) || defined(STM32F479xx)
|
|
/**
|
|
* @brief Setup the external memory controller.
|
|
* Called in startup_stm32f4xx.s before jump to main.
|
|
* This function configures the external memories (SRAM/SDRAM)
|
|
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemInit_ExtMemCtl(void)
|
|
{
|
|
__IO uint32_t tmp = 0x00;
|
|
|
|
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
|
register __IO uint32_t index;
|
|
|
|
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
|
|
RCC->AHB1ENR |= 0x000001F8;
|
|
|
|
/* Delay after an RCC peripheral clock enabling */
|
|
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
|
|
|
/* Connect PDx pins to FMC Alternate function */
|
|
GPIOD->AFR[0] = 0x00CCC0CC;
|
|
GPIOD->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PDx pins in Alternate function mode */
|
|
GPIOD->MODER = 0xAAAA0A8A;
|
|
/* Configure PDx pins speed to 100 MHz */
|
|
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
|
/* Configure PDx pins Output type to push-pull */
|
|
GPIOD->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PDx pins */
|
|
GPIOD->PUPDR = 0x00000000;
|
|
|
|
/* Connect PEx pins to FMC Alternate function */
|
|
GPIOE->AFR[0] = 0xC00CC0CC;
|
|
GPIOE->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PEx pins in Alternate function mode */
|
|
GPIOE->MODER = 0xAAAA828A;
|
|
/* Configure PEx pins speed to 100 MHz */
|
|
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
|
/* Configure PEx pins Output type to push-pull */
|
|
GPIOE->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PEx pins */
|
|
GPIOE->PUPDR = 0x00000000;
|
|
|
|
/* Connect PFx pins to FMC Alternate function */
|
|
GPIOF->AFR[0] = 0xCCCCCCCC;
|
|
GPIOF->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PFx pins in Alternate function mode */
|
|
GPIOF->MODER = 0xAA800AAA;
|
|
/* Configure PFx pins speed to 50 MHz */
|
|
GPIOF->OSPEEDR = 0xAA800AAA;
|
|
/* Configure PFx pins Output type to push-pull */
|
|
GPIOF->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PFx pins */
|
|
GPIOF->PUPDR = 0x00000000;
|
|
|
|
/* Connect PGx pins to FMC Alternate function */
|
|
GPIOG->AFR[0] = 0xCCCCCCCC;
|
|
GPIOG->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PGx pins in Alternate function mode */
|
|
GPIOG->MODER = 0xAAAAAAAA;
|
|
/* Configure PGx pins speed to 50 MHz */
|
|
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
|
/* Configure PGx pins Output type to push-pull */
|
|
GPIOG->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PGx pins */
|
|
GPIOG->PUPDR = 0x00000000;
|
|
|
|
/* Connect PHx pins to FMC Alternate function */
|
|
GPIOH->AFR[0] = 0x00C0CC00;
|
|
GPIOH->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PHx pins in Alternate function mode */
|
|
GPIOH->MODER = 0xAAAA08A0;
|
|
/* Configure PHx pins speed to 50 MHz */
|
|
GPIOH->OSPEEDR = 0xAAAA08A0;
|
|
/* Configure PHx pins Output type to push-pull */
|
|
GPIOH->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PHx pins */
|
|
GPIOH->PUPDR = 0x00000000;
|
|
|
|
/* Connect PIx pins to FMC Alternate function */
|
|
GPIOI->AFR[0] = 0xCCCCCCCC;
|
|
GPIOI->AFR[1] = 0x00000CC0;
|
|
/* Configure PIx pins in Alternate function mode */
|
|
GPIOI->MODER = 0x0028AAAA;
|
|
/* Configure PIx pins speed to 50 MHz */
|
|
GPIOI->OSPEEDR = 0x0028AAAA;
|
|
/* Configure PIx pins Output type to push-pull */
|
|
GPIOI->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PIx pins */
|
|
GPIOI->PUPDR = 0x00000000;
|
|
|
|
/*-- FMC Configuration -------------------------------------------------------*/
|
|
/* Enable the FMC interface clock */
|
|
RCC->AHB3ENR |= 0x00000001;
|
|
/* Delay after an RCC peripheral clock enabling */
|
|
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
|
|
|
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
|
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
|
|
|
/* SDRAM initialization sequence */
|
|
/* Clock enable command */
|
|
FMC_Bank5_6->SDCMR = 0x00000011;
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
while((tmpreg != 0) && (timeout-- > 0))
|
|
{
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
}
|
|
|
|
/* Delay */
|
|
for (index = 0; index<1000; index++);
|
|
|
|
/* PALL command */
|
|
FMC_Bank5_6->SDCMR = 0x00000012;
|
|
timeout = 0xFFFF;
|
|
while((tmpreg != 0) && (timeout-- > 0))
|
|
{
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
}
|
|
|
|
/* Auto refresh command */
|
|
FMC_Bank5_6->SDCMR = 0x00000073;
|
|
timeout = 0xFFFF;
|
|
while((tmpreg != 0) && (timeout-- > 0))
|
|
{
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
}
|
|
|
|
/* MRD register program */
|
|
FMC_Bank5_6->SDCMR = 0x00046014;
|
|
timeout = 0xFFFF;
|
|
while((tmpreg != 0) && (timeout-- > 0))
|
|
{
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
}
|
|
|
|
/* Set refresh count */
|
|
tmpreg = FMC_Bank5_6->SDRTR;
|
|
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
|
|
|
/* Disable write protection */
|
|
tmpreg = FMC_Bank5_6->SDCR[0];
|
|
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
|
/* Configure and enable Bank1_SRAM2 */
|
|
FMC_Bank1->BTCR[2] = 0x00001011;
|
|
FMC_Bank1->BTCR[3] = 0x00000201;
|
|
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
/* Configure and enable Bank1_SRAM2 */
|
|
FMC_Bank1->BTCR[2] = 0x00001091;
|
|
FMC_Bank1->BTCR[3] = 0x00110212;
|
|
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
|
|
(void)(tmp);
|
|
}
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
|
/**
|
|
* @brief Setup the external memory controller.
|
|
* Called in startup_stm32f4xx.s before jump to main.
|
|
* This function configures the external memories (SRAM/SDRAM)
|
|
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemInit_ExtMemCtl(void)
|
|
{
|
|
__IO uint32_t tmp = 0x00;
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
|
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
#if defined (DATA_IN_ExtSDRAM)
|
|
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
|
register __IO uint32_t index;
|
|
|
|
#if defined(STM32F446xx)
|
|
/* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
|
|
clock */
|
|
RCC->AHB1ENR |= 0x0000007D;
|
|
#else
|
|
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
|
|
clock */
|
|
RCC->AHB1ENR |= 0x000001F8;
|
|
#endif /* STM32F446xx */
|
|
/* Delay after an RCC peripheral clock enabling */
|
|
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
|
|
|
#if defined(STM32F446xx)
|
|
/* Connect PAx pins to FMC Alternate function */
|
|
GPIOA->AFR[0] |= 0xC0000000;
|
|
GPIOA->AFR[1] |= 0x00000000;
|
|
/* Configure PDx pins in Alternate function mode */
|
|
GPIOA->MODER |= 0x00008000;
|
|
/* Configure PDx pins speed to 50 MHz */
|
|
GPIOA->OSPEEDR |= 0x00008000;
|
|
/* Configure PDx pins Output type to push-pull */
|
|
GPIOA->OTYPER |= 0x00000000;
|
|
/* No pull-up, pull-down for PDx pins */
|
|
GPIOA->PUPDR |= 0x00000000;
|
|
|
|
/* Connect PCx pins to FMC Alternate function */
|
|
GPIOC->AFR[0] |= 0x00CC0000;
|
|
GPIOC->AFR[1] |= 0x00000000;
|
|
/* Configure PDx pins in Alternate function mode */
|
|
GPIOC->MODER |= 0x00000A00;
|
|
/* Configure PDx pins speed to 50 MHz */
|
|
GPIOC->OSPEEDR |= 0x00000A00;
|
|
/* Configure PDx pins Output type to push-pull */
|
|
GPIOC->OTYPER |= 0x00000000;
|
|
/* No pull-up, pull-down for PDx pins */
|
|
GPIOC->PUPDR |= 0x00000000;
|
|
#endif /* STM32F446xx */
|
|
|
|
/* Connect PDx pins to FMC Alternate function */
|
|
GPIOD->AFR[0] = 0x000000CC;
|
|
GPIOD->AFR[1] = 0xCC000CCC;
|
|
/* Configure PDx pins in Alternate function mode */
|
|
GPIOD->MODER = 0xA02A000A;
|
|
/* Configure PDx pins speed to 50 MHz */
|
|
GPIOD->OSPEEDR = 0xA02A000A;
|
|
/* Configure PDx pins Output type to push-pull */
|
|
GPIOD->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PDx pins */
|
|
GPIOD->PUPDR = 0x00000000;
|
|
|
|
/* Connect PEx pins to FMC Alternate function */
|
|
GPIOE->AFR[0] = 0xC00000CC;
|
|
GPIOE->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PEx pins in Alternate function mode */
|
|
GPIOE->MODER = 0xAAAA800A;
|
|
/* Configure PEx pins speed to 50 MHz */
|
|
GPIOE->OSPEEDR = 0xAAAA800A;
|
|
/* Configure PEx pins Output type to push-pull */
|
|
GPIOE->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PEx pins */
|
|
GPIOE->PUPDR = 0x00000000;
|
|
|
|
/* Connect PFx pins to FMC Alternate function */
|
|
GPIOF->AFR[0] = 0xCCCCCCCC;
|
|
GPIOF->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PFx pins in Alternate function mode */
|
|
GPIOF->MODER = 0xAA800AAA;
|
|
/* Configure PFx pins speed to 50 MHz */
|
|
GPIOF->OSPEEDR = 0xAA800AAA;
|
|
/* Configure PFx pins Output type to push-pull */
|
|
GPIOF->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PFx pins */
|
|
GPIOF->PUPDR = 0x00000000;
|
|
|
|
/* Connect PGx pins to FMC Alternate function */
|
|
GPIOG->AFR[0] = 0xCCCCCCCC;
|
|
GPIOG->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PGx pins in Alternate function mode */
|
|
GPIOG->MODER = 0xAAAAAAAA;
|
|
/* Configure PGx pins speed to 50 MHz */
|
|
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
|
/* Configure PGx pins Output type to push-pull */
|
|
GPIOG->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PGx pins */
|
|
GPIOG->PUPDR = 0x00000000;
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
|
|| defined(STM32F469xx) || defined(STM32F479xx)
|
|
/* Connect PHx pins to FMC Alternate function */
|
|
GPIOH->AFR[0] = 0x00C0CC00;
|
|
GPIOH->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PHx pins in Alternate function mode */
|
|
GPIOH->MODER = 0xAAAA08A0;
|
|
/* Configure PHx pins speed to 50 MHz */
|
|
GPIOH->OSPEEDR = 0xAAAA08A0;
|
|
/* Configure PHx pins Output type to push-pull */
|
|
GPIOH->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PHx pins */
|
|
GPIOH->PUPDR = 0x00000000;
|
|
|
|
/* Connect PIx pins to FMC Alternate function */
|
|
GPIOI->AFR[0] = 0xCCCCCCCC;
|
|
GPIOI->AFR[1] = 0x00000CC0;
|
|
/* Configure PIx pins in Alternate function mode */
|
|
GPIOI->MODER = 0x0028AAAA;
|
|
/* Configure PIx pins speed to 50 MHz */
|
|
GPIOI->OSPEEDR = 0x0028AAAA;
|
|
/* Configure PIx pins Output type to push-pull */
|
|
GPIOI->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PIx pins */
|
|
GPIOI->PUPDR = 0x00000000;
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
|
|
/*-- FMC Configuration -------------------------------------------------------*/
|
|
/* Enable the FMC interface clock */
|
|
RCC->AHB3ENR |= 0x00000001;
|
|
/* Delay after an RCC peripheral clock enabling */
|
|
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
|
|
|
/* Configure and enable SDRAM bank1 */
|
|
#if defined(STM32F446xx)
|
|
FMC_Bank5_6->SDCR[0] = 0x00001954;
|
|
#else
|
|
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
|
#endif /* STM32F446xx */
|
|
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
|
|
|
/* SDRAM initialization sequence */
|
|
/* Clock enable command */
|
|
FMC_Bank5_6->SDCMR = 0x00000011;
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
while((tmpreg != 0) && (timeout-- > 0))
|
|
{
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
}
|
|
|
|
/* Delay */
|
|
for (index = 0; index<1000; index++);
|
|
|
|
/* PALL command */
|
|
FMC_Bank5_6->SDCMR = 0x00000012;
|
|
timeout = 0xFFFF;
|
|
while((tmpreg != 0) && (timeout-- > 0))
|
|
{
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
}
|
|
|
|
/* Auto refresh command */
|
|
#if defined(STM32F446xx)
|
|
FMC_Bank5_6->SDCMR = 0x000000F3;
|
|
#else
|
|
FMC_Bank5_6->SDCMR = 0x00000073;
|
|
#endif /* STM32F446xx */
|
|
timeout = 0xFFFF;
|
|
while((tmpreg != 0) && (timeout-- > 0))
|
|
{
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
}
|
|
|
|
/* MRD register program */
|
|
#if defined(STM32F446xx)
|
|
FMC_Bank5_6->SDCMR = 0x00044014;
|
|
#else
|
|
FMC_Bank5_6->SDCMR = 0x00046014;
|
|
#endif /* STM32F446xx */
|
|
timeout = 0xFFFF;
|
|
while((tmpreg != 0) && (timeout-- > 0))
|
|
{
|
|
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
|
}
|
|
|
|
/* Set refresh count */
|
|
tmpreg = FMC_Bank5_6->SDRTR;
|
|
#if defined(STM32F446xx)
|
|
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
|
|
#else
|
|
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
|
#endif /* STM32F446xx */
|
|
|
|
/* Disable write protection */
|
|
tmpreg = FMC_Bank5_6->SDCR[0];
|
|
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
|
#endif /* DATA_IN_ExtSDRAM */
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
|
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
|
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
|
|
|
#if defined(DATA_IN_ExtSRAM)
|
|
/*-- GPIOs Configuration -----------------------------------------------------*/
|
|
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
|
RCC->AHB1ENR |= 0x00000078;
|
|
/* Delay after an RCC peripheral clock enabling */
|
|
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
|
|
|
|
/* Connect PDx pins to FMC Alternate function */
|
|
GPIOD->AFR[0] = 0x00CCC0CC;
|
|
GPIOD->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PDx pins in Alternate function mode */
|
|
GPIOD->MODER = 0xAAAA0A8A;
|
|
/* Configure PDx pins speed to 100 MHz */
|
|
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
|
/* Configure PDx pins Output type to push-pull */
|
|
GPIOD->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PDx pins */
|
|
GPIOD->PUPDR = 0x00000000;
|
|
|
|
/* Connect PEx pins to FMC Alternate function */
|
|
GPIOE->AFR[0] = 0xC00CC0CC;
|
|
GPIOE->AFR[1] = 0xCCCCCCCC;
|
|
/* Configure PEx pins in Alternate function mode */
|
|
GPIOE->MODER = 0xAAAA828A;
|
|
/* Configure PEx pins speed to 100 MHz */
|
|
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
|
/* Configure PEx pins Output type to push-pull */
|
|
GPIOE->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PEx pins */
|
|
GPIOE->PUPDR = 0x00000000;
|
|
|
|
/* Connect PFx pins to FMC Alternate function */
|
|
GPIOF->AFR[0] = 0x00CCCCCC;
|
|
GPIOF->AFR[1] = 0xCCCC0000;
|
|
/* Configure PFx pins in Alternate function mode */
|
|
GPIOF->MODER = 0xAA000AAA;
|
|
/* Configure PFx pins speed to 100 MHz */
|
|
GPIOF->OSPEEDR = 0xFF000FFF;
|
|
/* Configure PFx pins Output type to push-pull */
|
|
GPIOF->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PFx pins */
|
|
GPIOF->PUPDR = 0x00000000;
|
|
|
|
/* Connect PGx pins to FMC Alternate function */
|
|
GPIOG->AFR[0] = 0x00CCCCCC;
|
|
GPIOG->AFR[1] = 0x000000C0;
|
|
/* Configure PGx pins in Alternate function mode */
|
|
GPIOG->MODER = 0x00085AAA;
|
|
/* Configure PGx pins speed to 100 MHz */
|
|
GPIOG->OSPEEDR = 0x000CAFFF;
|
|
/* Configure PGx pins Output type to push-pull */
|
|
GPIOG->OTYPER = 0x00000000;
|
|
/* No pull-up, pull-down for PGx pins */
|
|
GPIOG->PUPDR = 0x00000000;
|
|
|
|
/*-- FMC/FSMC Configuration --------------------------------------------------*/
|
|
/* Enable the FMC/FSMC interface clock */
|
|
RCC->AHB3ENR |= 0x00000001;
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
|
/* Delay after an RCC peripheral clock enabling */
|
|
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
|
/* Configure and enable Bank1_SRAM2 */
|
|
FMC_Bank1->BTCR[2] = 0x00001011;
|
|
FMC_Bank1->BTCR[3] = 0x00000201;
|
|
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
/* Delay after an RCC peripheral clock enabling */
|
|
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
|
/* Configure and enable Bank1_SRAM2 */
|
|
FMC_Bank1->BTCR[2] = 0x00001091;
|
|
FMC_Bank1->BTCR[3] = 0x00110212;
|
|
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
|
|
|| defined(STM32F412Zx) || defined(STM32F412Vx)
|
|
/* Delay after an RCC peripheral clock enabling */
|
|
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
|
|
/* Configure and enable Bank1_SRAM2 */
|
|
FSMC_Bank1->BTCR[2] = 0x00001011;
|
|
FSMC_Bank1->BTCR[3] = 0x00000201;
|
|
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
|
|
|
|
#endif /* DATA_IN_ExtSRAM */
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
|
|
STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
|
|
(void)(tmp);
|
|
}
|
|
#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|