andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
d4abf43f226b5594c935c60c38d05a90359763e1
tinyUSB/hw/bsp/imxrt/family.c

641 lines
24 KiB
C
Raw Blame History

/*
* The MIT License (MIT)
*
* Copyright (c) 2018, hathach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
/* metadata:
manufacturer: NXP
*/
#include "bsp/board_api.h"
#include "board/clock_config.h"
#include "board/pin_mux.h"
#include "board.h"
// Suppress warning caused by mcu driver
#ifdef __GNUC__
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-parameter"
#endif
#include "fsl_clock.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
#include "fsl_lpuart.h"
#include "fsl_ocotp.h"
#ifdef __GNUC__
#pragma GCC diagnostic pop
#endif
/* --- Note about USB buffer RAM ---
For M7 core it's recommended to put USB buffer in DTCM for better performance (flexspi_nor linker default)
Otherwise you have to put the buffer in a non-cacheable section by configurate MPU manually or using BOARD_ConfigMPU():
- Define CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable")))
- (IAR only) Change __NCACHE_REGION_SIZE in linker script to cover the size of non-cacheable section, multiple of 2^N
For secondary M4 core, the USB controller doesn't support transfer from DTCM so OCRAM must be used:
- __NCACHE_REGION_SIZE is defined by the linker script by default
- Define CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable")))
*/
// static void BOARD_ConfigMPU(void);
// needed by fsl_flexspi_nor_boot
TU_ATTR_USED const uint8_t dcd_data[] = {0x00};
//--------------------------------------------------------------------+
//
//--------------------------------------------------------------------+
// unify naming convention
#if !defined(USBPHY1) && defined(USBPHY)
#define USBPHY1 USBPHY
#endif
static void init_usb_phy(uint8_t usb_id) {
USBPHY_Type *usb_phy;
if (usb_id == 0) {
usb_phy = USBPHY1;
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, BOARD_XTAL0_CLK_HZ);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, BOARD_XTAL0_CLK_HZ);
}
#ifdef USBPHY2
else if (usb_id == 1) {
usb_phy = USBPHY2;
CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, BOARD_XTAL0_CLK_HZ);
CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, BOARD_XTAL0_CLK_HZ);
}
#endif
else {
return;
}
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
// Enable all power for normal operation
// TODO may not be needed since it is called within CLOCK_EnableUsbhs0PhyPllClock()
usb_phy->PWD = 0;
// TX Timing
uint32_t phytx = usb_phy->TX;
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
usb_phy->TX = phytx;
}
void board_init(void) {
// BOARD_ConfigMPU();
BOARD_InitBootPins();
BOARD_BootClockRUN();
SystemCoreClockUpdate();
#ifdef TRACE_ETM
//CLOCK_EnableClock(kCLOCK_Trace);
#endif
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
NVIC_SetPriority(USB_OTG1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
#ifdef USBPHY2
NVIC_SetPriority(USB_OTG2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
#endif
#endif
board_led_write(true);
// UART
lpuart_config_t uart_config;
LPUART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
if (kStatus_Success != LPUART_Init(UART_PORT, &uart_config, UART_CLK_ROOT)) {
// failed to init uart, probably baudrate is not supported
// TU_BREAKPOINT();
}
//------------- USB -------------//
// Note: RT105x RT106x and later have dual USB controllers.
init_usb_phy(0);// USB0
#ifdef USBPHY2
init_usb_phy(1);// USB1
#endif
}
//--------------------------------------------------------------------+
// USB Interrupt Handler
//--------------------------------------------------------------------+
void USB_OTG1_IRQHandler(void) {
tusb_int_handler(0, true);
}
void USB_OTG2_IRQHandler(void) {
tusb_int_handler(1, true);
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state) {
GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON));
}
uint32_t board_button_read(void) {
return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
}
size_t board_get_unique_id(uint8_t id[], size_t max_len) {
(void) max_len;
#if FSL_FEATURE_OCOTP_HAS_TIMING_CTRL
OCOTP_Init(OCOTP, CLOCK_GetFreq(kCLOCK_IpgClk));
#else
OCOTP_Init(OCOTP, 0u);
#endif
// Reads shadow registers 0x01 - 0x04 (Configuration and Manufacturing Info)
// into 8 bit wide destination, avoiding punning.
for (int i = 0; i < 4; ++i) {
uint32_t wr = OCOTP_ReadFuseShadowRegister(OCOTP, i + 1);
for (int j = 0; j < 4; j++) {
id[i * 4 + j] = wr & 0xff;
wr >>= 8;
}
}
OCOTP_Deinit(OCOTP);
return 16;
}
int board_uart_read(uint8_t *buf, int len) {
int count = 0;
while (count < len) {
uint8_t const rx_count = LPUART_GetRxFifoCount(UART_PORT);
if (!rx_count) {
// clear all error flag if any
uint32_t status_flags = LPUART_GetStatusFlags(UART_PORT);
status_flags &= (kLPUART_RxOverrunFlag | kLPUART_ParityErrorFlag | kLPUART_FramingErrorFlag |
kLPUART_NoiseErrorFlag);
LPUART_ClearStatusFlags(UART_PORT, status_flags);
break;
}
for (int i = 0; i < rx_count; i++) {
buf[count] = LPUART_ReadByte(UART_PORT);
count++;
}
}
return count;
}
int board_uart_write(void const *buf, int len) {
LPUART_WriteBlocking(UART_PORT, (uint8_t const *) buf, len);
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void) {
system_ticks++;
}
uint32_t board_millis(void) {
return system_ticks;
}
#endif
#ifndef __ICCARM__
// Implement _start() since we use linker flag '-nostartfiles'.
// Requires defined __STARTUP_CLEAR_BSS,
extern int main(void);
TU_ATTR_UNUSED void _start(void) {
// called by startup code
main();
while (1) {}
}
#ifdef __clang__
void _exit(int __status) {
while (1) {}
}
#endif
#endif
//--------------------------------------------------------------------
// MPU configuration
//--------------------------------------------------------------------
#if 0 // TODO move to per board specific
#if __CORTEX_M == 7
static void BOARD_ConfigMPU(void) {
#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
extern uint32_t Image$$RW_m_ncache$$Base[];
/* RW_m_ncache_unused is a auxiliary region which is used to get the whole size of noncache section */
extern uint32_t Image$$RW_m_ncache_unused$$Base[];
extern uint32_t Image$$RW_m_ncache_unused$$ZI$$Limit[];
uint32_t nonCacheStart = (uint32_t) Image$$RW_m_ncache$$Base;
uint32_t size = ((uint32_t) Image$$RW_m_ncache_unused$$Base == nonCacheStart) ? 0 : ((uint32_t) Image$$RW_m_ncache_unused$$ZI$$Limit - nonCacheStart);
#elif defined(__MCUXPRESSO)
#if defined(__USE_SHMEM)
extern uint32_t __base_rpmsg_sh_mem;
extern uint32_t __top_rpmsg_sh_mem;
uint32_t nonCacheStart = (uint32_t) (&__base_rpmsg_sh_mem);
uint32_t size = (uint32_t) (&__top_rpmsg_sh_mem) - nonCacheStart;
#else
extern uint32_t __base_NCACHE_REGION;
extern uint32_t __top_NCACHE_REGION;
uint32_t nonCacheStart = (uint32_t) (&__base_NCACHE_REGION);
uint32_t size = (uint32_t) (&__top_NCACHE_REGION) - nonCacheStart;
#endif
#elif defined(__ICCARM__) || defined(__GNUC__)
extern uint32_t __NCACHE_REGION_START[];
extern uint32_t __NCACHE_REGION_SIZE[];
uint32_t nonCacheStart = (uint32_t) __NCACHE_REGION_START;
uint32_t size = (uint32_t) __NCACHE_REGION_SIZE;
#endif
volatile uint32_t i = 0;
#if defined(__ICACHE_PRESENT) && __ICACHE_PRESENT
/* Disable I cache and D cache */
if (SCB_CCR_IC_Msk == (SCB_CCR_IC_Msk & SCB->CCR)) {
SCB_DisableICache();
}
#endif
#if defined(__DCACHE_PRESENT) && __DCACHE_PRESENT
if (SCB_CCR_DC_Msk == (SCB_CCR_DC_Msk & SCB->CCR)) {
SCB_DisableDCache();
}
#endif
/* Disable MPU */
ARM_MPU_Disable();
/* MPU configure:
* Use ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable,
* SubRegionDisable, Size)
* API in mpu_armv7.h.
* param DisableExec Instruction access (XN) disable bit,0=instruction fetches enabled, 1=instruction fetches
* disabled.
* param AccessPermission Data access permissions, allows you to configure read/write access for User and
* Privileged mode.
* Use MACROS defined in mpu_armv7.h:
* ARM_MPU_AP_NONE/ARM_MPU_AP_PRIV/ARM_MPU_AP_URO/ARM_MPU_AP_FULL/ARM_MPU_AP_PRO/ARM_MPU_AP_RO
* Combine TypeExtField/IsShareable/IsCacheable/IsBufferable to configure MPU memory access attributes.
* TypeExtField IsShareable IsCacheable IsBufferable Memory Attribute Shareability Cache
* 0 x 0 0 Strongly Ordered shareable
* 0 x 0 1 Device shareable
* 0 0 1 0 Normal not shareable Outer and inner write
* through no write allocate
* 0 0 1 1 Normal not shareable Outer and inner write
* back no write allocate
* 0 1 1 0 Normal shareable Outer and inner write
* through no write allocate
* 0 1 1 1 Normal shareable Outer and inner write
* back no write allocate
* 1 0 0 0 Normal not shareable outer and inner
* noncache
* 1 1 0 0 Normal shareable outer and inner
* noncache
* 1 0 1 1 Normal not shareable outer and inner write
* back write/read acllocate
* 1 1 1 1 Normal shareable outer and inner write
* back write/read acllocate
* 2 x 0 0 Device not shareable
* Above are normal use settings, if your want to see more details or want to config different inner/outer cache
* policy.
* please refer to Table 4-55 /4-56 in arm cortex-M7 generic user guide <dui0646b_cortex_m7_dgug.pdf>
* param SubRegionDisable Sub-region disable field. 0=sub-region is enabled, 1=sub-region is disabled.
* param Size Region size of the region to be configured. use ARM_MPU_REGION_SIZE_xxx MACRO in
* mpu_armv7.h.
*/
/*
* Add default region to deny access to whole address space to workaround speculative prefetch.
* Refer to Arm errata 1013783-B for more details.
*
*/
/* Region 0 setting: Instruction access disabled, No data access permission. */
MPU->RBAR = ARM_MPU_RBAR(0, 0x00000000U);
MPU->RASR = ARM_MPU_RASR(1, ARM_MPU_AP_NONE, 0, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_4GB);
/* Region 1 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(1, 0x80000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
/* Region 2 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(2, 0x60000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
/* Region 3 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(3, 0x00000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
/* Region 4 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(4, 0x00000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_256KB);
/* Region 5 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(5, 0x20000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_256KB);
#if defined(CACHE_MODE_WRITE_THROUGH) && CACHE_MODE_WRITE_THROUGH
/* Region 6 setting: Memory with Normal type, not shareable, write through */
MPU->RBAR = ARM_MPU_RBAR(6, 0x20200000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 0, 0, ARM_MPU_REGION_SIZE_1MB);
/* Region 7 setting: Memory with Normal type, not shareable, write through */
MPU->RBAR = ARM_MPU_RBAR(7, 0x20300000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 0, 0, ARM_MPU_REGION_SIZE_512KB);
#else
/* Region 6 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(6, 0x20200000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_1MB);
/* Region 7 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(7, 0x20300000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_512KB);
#endif
#if defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)
/* Region 8 setting: Memory with Normal type, not shareable, outer/inner write back. */
MPU->RBAR = ARM_MPU_RBAR(8, 0x30000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_RO, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_16MB);
#endif
#ifdef USE_SDRAM
#if defined(CACHE_MODE_WRITE_THROUGH) && CACHE_MODE_WRITE_THROUGH
/* Region 9 setting: Memory with Normal type, not shareable, write through */
MPU->RBAR = ARM_MPU_RBAR(9, 0x80000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 0, 0, ARM_MPU_REGION_SIZE_64MB);
#else
/* Region 9 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(9, 0x80000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_64MB);
#endif
#endif
while ((size >> i) > 0x1U) {
i++;
}
if (i != 0) {
/* The MPU region size should be 2^N, 5<=N<=32, region base should be multiples of size. */
assert(!(nonCacheStart % size));
assert(size == (uint32_t) (1 << i));
assert(i >= 5);
/* Region 10 setting: Memory with Normal type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(10, nonCacheStart);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 1, 0, 0, 0, 0, i - 1);
}
/* Region 11 setting: Memory with Device type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(11, 0x40000000);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_16MB);
/* Region 12 setting: Memory with Device type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(12, 0x41000000);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_2MB);
/* Region 13 setting: Memory with Device type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(13, 0x41400000);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1MB);
/* Region 14 setting: Memory with Device type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(14, 0x41800000);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_2MB);
/* Region 15 setting: Memory with Device type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(15, 0x42000000);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1MB);
/* Enable MPU */
ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk | MPU_CTRL_HFNMIENA_Msk);
/* Enable I cache and D cache */
#if defined(__DCACHE_PRESENT) && __DCACHE_PRESENT
SCB_EnableDCache();
#endif
#if defined(__ICACHE_PRESENT) && __ICACHE_PRESENT
SCB_EnableICache();
#endif
}
#elif __CORTEX_M == 4
static void BOARD_ConfigMPU(void) {
#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
extern uint32_t Image$$RW_m_ncache$$Base[];
/* RW_m_ncache_unused is a auxiliary region which is used to get the whole size of noncache section */
extern uint32_t Image$$RW_m_ncache_unused$$Base[];
extern uint32_t Image$$RW_m_ncache_unused$$ZI$$Limit[];
uint32_t nonCacheStart = (uint32_t) Image$$RW_m_ncache$$Base;
uint32_t nonCacheSize = ((uint32_t) Image$$RW_m_ncache_unused$$Base == nonCacheStart) ? 0 : ((uint32_t) Image$$RW_m_ncache_unused$$ZI$$Limit - nonCacheStart);
#elif defined(__MCUXPRESSO)
extern uint32_t __base_NCACHE_REGION;
extern uint32_t __top_NCACHE_REGION;
uint32_t nonCacheStart = (uint32_t) (&__base_NCACHE_REGION);
uint32_t nonCacheSize = (uint32_t) (&__top_NCACHE_REGION) - nonCacheStart;
#elif defined(__ICCARM__) || defined(__GNUC__)
extern uint32_t __NCACHE_REGION_START[];
extern uint32_t __NCACHE_REGION_SIZE[];
uint32_t nonCacheStart = (uint32_t) __NCACHE_REGION_START;
uint32_t nonCacheSize = (uint32_t) __NCACHE_REGION_SIZE;
#endif
#if defined(__USE_SHMEM)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
extern uint32_t Image$$RPMSG_SH_MEM$$Base[];
/* RPMSG_SH_MEM_unused is a auxiliary region which is used to get the whole size of RPMSG_SH_MEM section */
extern uint32_t Image$$RPMSG_SH_MEM_unused$$Base[];
extern uint32_t Image$$RPMSG_SH_MEM_unused$$ZI$$Limit[];
uint32_t rpmsgShmemStart = (uint32_t) Image$$RPMSG_SH_MEM$$Base;
uint32_t rpmsgShmemSize = (uint32_t) Image$$RPMSG_SH_MEM_unused$$ZI$$Limit - rpmsgShmemStart;
#elif defined(__MCUXPRESSO)
extern uint32_t __base_rpmsg_sh_mem;
extern uint32_t __top_rpmsg_sh_mem;
uint32_t rpmsgShmemStart = (uint32_t) (&__base_rpmsg_sh_mem);
uint32_t rpmsgShmemSize = (uint32_t) (&__top_rpmsg_sh_mem) - rpmsgShmemStart;
#elif defined(__ICCARM__) || defined(__GNUC__)
extern uint32_t __RPMSG_SH_MEM_START[];
extern uint32_t __RPMSG_SH_MEM_SIZE[];
uint32_t rpmsgShmemStart = (uint32_t) __RPMSG_SH_MEM_START;
uint32_t rpmsgShmemSize = (uint32_t) __RPMSG_SH_MEM_SIZE;
#endif
#endif
uint32_t i = 0;
/* Only config non-cacheable region on system bus */
assert(nonCacheStart >= 0x20000000);
/* Disable code bus cache */
if (LMEM_PCCCR_ENCACHE_MASK == (LMEM_PCCCR_ENCACHE_MASK & LMEM->PCCCR)) {
/* Enable the processor code bus to push all modified lines. */
LMEM->PCCCR |= LMEM_PCCCR_PUSHW0_MASK | LMEM_PCCCR_PUSHW1_MASK | LMEM_PCCCR_GO_MASK;
/* Wait until the cache command completes. */
while ((LMEM->PCCCR & LMEM_PCCCR_GO_MASK) != 0U) {
}
/* As a precaution clear the bits to avoid inadvertently re-running this command. */
LMEM->PCCCR &= ~(LMEM_PCCCR_PUSHW0_MASK | LMEM_PCCCR_PUSHW1_MASK);
/* Now disable the cache. */
LMEM->PCCCR &= ~LMEM_PCCCR_ENCACHE_MASK;
}
/* Disable system bus cache */
if (LMEM_PSCCR_ENCACHE_MASK == (LMEM_PSCCR_ENCACHE_MASK & LMEM->PSCCR)) {
/* Enable the processor system bus to push all modified lines. */
LMEM->PSCCR |= LMEM_PSCCR_PUSHW0_MASK | LMEM_PSCCR_PUSHW1_MASK | LMEM_PSCCR_GO_MASK;
/* Wait until the cache command completes. */
while ((LMEM->PSCCR & LMEM_PSCCR_GO_MASK) != 0U) {
}
/* As a precaution clear the bits to avoid inadvertently re-running this command. */
LMEM->PSCCR &= ~(LMEM_PSCCR_PUSHW0_MASK | LMEM_PSCCR_PUSHW1_MASK);
/* Now disable the cache. */
LMEM->PSCCR &= ~LMEM_PSCCR_ENCACHE_MASK;
}
/* Disable MPU */
ARM_MPU_Disable();
#if defined(CACHE_MODE_WRITE_THROUGH) && CACHE_MODE_WRITE_THROUGH
/* Region 0 setting: Memory with Normal type, not shareable, write through */
MPU->RBAR = ARM_MPU_RBAR(0, 0x20200000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 0, 0, ARM_MPU_REGION_SIZE_1MB);
/* Region 1 setting: Memory with Normal type, not shareable, write through */
MPU->RBAR = ARM_MPU_RBAR(1, 0x20300000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 0, 0, ARM_MPU_REGION_SIZE_512KB);
/* Region 2 setting: Memory with Normal type, not shareable, write through */
MPU->RBAR = ARM_MPU_RBAR(2, 0x80000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 0, 0, ARM_MPU_REGION_SIZE_64MB);
while ((nonCacheSize >> i) > 0x1U) {
i++;
}
if (i != 0) {
/* The MPU region size should be 2^N, 5<=N<=32, region base should be multiples of size. */
assert(!(nonCacheStart % nonCacheSize));
assert(nonCacheSize == (uint32_t) (1 << i));
assert(i >= 5);
/* Region 3 setting: Memory with device type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(3, nonCacheStart);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, i - 1);
}
#if defined(__USE_SHMEM)
i = 0;
while ((rpmsgShmemSize >> i) > 0x1U) {
i++;
}
if (i != 0) {
/* The MPU region size should be 2^N, 5<=N<=32, region base should be multiples of size. */
assert(!(rpmsgShmemStart % rpmsgShmemSize));
assert(rpmsgShmemSize == (uint32_t) (1 << i));
assert(i >= 5);
/* Region 4 setting: Memory with device type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(4, rpmsgShmemStart);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, i - 1);
}
#endif
#else
while ((nonCacheSize >> i) > 0x1U) {
i++;
}
if (i != 0) {
/* The MPU region size should be 2^N, 5<=N<=32, region base should be multiples of size. */
assert(!(nonCacheStart % nonCacheSize));
assert(nonCacheSize == (uint32_t) (1 << i));
assert(i >= 5);
/* Region 0 setting: Memory with device type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(0, nonCacheStart);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, i - 1);
}
#if defined(__USE_SHMEM)
i = 0;
while ((rpmsgShmemSize >> i) > 0x1U) {
i++;
}
if (i != 0) {
/* The MPU region size should be 2^N, 5<=N<=32, region base should be multiples of size. */
assert(!(rpmsgShmemStart % rpmsgShmemSize));
assert(rpmsgShmemSize == (uint32_t) (1 << i));
assert(i >= 5);
/* Region 1 setting: Memory with device type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(1, rpmsgShmemStart);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, i - 1);
}
#endif
#endif
/* Enable MPU */
ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk | MPU_CTRL_HFNMIENA_Msk);
/* Enables the processor system bus to invalidate all lines in both ways.
and Initiate the processor system bus cache command. */
LMEM->PSCCR |= LMEM_PSCCR_INVW0_MASK | LMEM_PSCCR_INVW1_MASK | LMEM_PSCCR_GO_MASK;
/* Wait until the cache command completes */
while ((LMEM->PSCCR & LMEM_PSCCR_GO_MASK) != 0U) {
}
/* As a precaution clear the bits to avoid inadvertently re-running this command. */
LMEM->PSCCR &= ~(LMEM_PSCCR_INVW0_MASK | LMEM_PSCCR_INVW1_MASK);
/* Now enable the system bus cache. */
LMEM->PSCCR |= LMEM_PSCCR_ENCACHE_MASK;
/* Enables the processor code bus to invalidate all lines in both ways.
and Initiate the processor code bus code cache command. */
LMEM->PCCCR |= LMEM_PCCCR_INVW0_MASK | LMEM_PCCCR_INVW1_MASK | LMEM_PCCCR_GO_MASK;
/* Wait until the cache command completes. */
while ((LMEM->PCCCR & LMEM_PCCCR_GO_MASK) != 0U) {
}
/* As a precaution clear the bits to avoid inadvertently re-running this command. */
LMEM->PCCCR &= ~(LMEM_PCCCR_INVW0_MASK | LMEM_PCCCR_INVW1_MASK);
/* Now enable the code bus cache. */
LMEM->PCCCR |= LMEM_PCCCR_ENCACHE_MASK;
}
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink