987 lines
29 KiB
C
987 lines
29 KiB
C
/********************************** (C) COPYRIGHT *******************************
|
|
* File Name : system_ch32v20x.c
|
|
* Author : WCH
|
|
* Version : V1.0.0
|
|
* Date : 2021/06/06
|
|
* Description : CH32V20x Device Peripheral Access Layer System Source File.
|
|
* For HSE = 32Mhz (CH32V208x/CH32V203RBT6)
|
|
* For HSE = 8Mhz (other CH32V203x)
|
|
*********************************************************************************
|
|
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
|
* Attention: This software (modified or not) and binary are used for
|
|
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
|
*******************************************************************************/
|
|
#include "ch32v20x.h"
|
|
|
|
/*
|
|
* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after
|
|
* reset the HSI is used as SYSCLK source).
|
|
* If none of the define below is enabled, the HSI is used as System clock source.
|
|
*/
|
|
//#define SYSCLK_FREQ_HSE HSE_VALUE
|
|
// #define SYSCLK_FREQ_48MHz_HSE 48000000
|
|
//#define SYSCLK_FREQ_56MHz_HSE 56000000
|
|
// #define SYSCLK_FREQ_72MHz_HSE 72000000
|
|
// #define SYSCLK_FREQ_96MHz_HSE 96000000
|
|
//#define SYSCLK_FREQ_120MHz_HSE 120000000
|
|
//#define SYSCLK_FREQ_144MHz_HSE 144000000
|
|
//#define SYSCLK_FREQ_HSI HSI_VALUE
|
|
//#define SYSCLK_FREQ_48MHz_HSI 48000000
|
|
//#define SYSCLK_FREQ_56MHz_HSI 56000000
|
|
//#define SYSCLK_FREQ_72MHz_HSI 72000000
|
|
//#define SYSCLK_FREQ_96MHz_HSI 96000000
|
|
//#define SYSCLK_FREQ_120MHz_HSI 120000000
|
|
//#define SYSCLK_FREQ_144MHz_HSI 144000000
|
|
|
|
/* Clock Definitions */
|
|
#ifdef SYSCLK_FREQ_HSE
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_48MHz_HSE
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_56MHz_HSE
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_72MHz_HSE
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_96MHz_HSE
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSE; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_120MHz_HSE
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSE; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_144MHz_HSE
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSE; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_48MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_56MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_72MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_96MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_120MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /* System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_144MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /* System Clock Frequency (Core Clock) */
|
|
#else
|
|
uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */
|
|
|
|
#endif
|
|
|
|
__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
|
|
|
/* system_private_function_proto_types */
|
|
static void SetSysClock(void);
|
|
|
|
#ifdef SYSCLK_FREQ_HSE
|
|
static void SetSysClockToHSE( void );
|
|
#elif defined SYSCLK_FREQ_48MHz_HSE
|
|
static void SetSysClockTo48_HSE( void );
|
|
#elif defined SYSCLK_FREQ_56MHz_HSE
|
|
static void SetSysClockTo56_HSE( void );
|
|
#elif defined SYSCLK_FREQ_72MHz_HSE
|
|
static void SetSysClockTo72_HSE( void );
|
|
#elif defined SYSCLK_FREQ_96MHz_HSE
|
|
static void SetSysClockTo96_HSE( void );
|
|
#elif defined SYSCLK_FREQ_120MHz_HSE
|
|
static void SetSysClockTo120_HSE( void );
|
|
#elif defined SYSCLK_FREQ_144MHz_HSE
|
|
static void SetSysClockTo144_HSE( void );
|
|
#elif defined SYSCLK_FREQ_48MHz_HSI
|
|
static void SetSysClockTo48_HSI( void );
|
|
#elif defined SYSCLK_FREQ_56MHz_HSI
|
|
static void SetSysClockTo56_HSI( void );
|
|
#elif defined SYSCLK_FREQ_72MHz_HSI
|
|
static void SetSysClockTo72_HSI( void );
|
|
#elif defined SYSCLK_FREQ_96MHz_HSI
|
|
static void SetSysClockTo96_HSI( void );
|
|
#elif defined SYSCLK_FREQ_120MHz_HSI
|
|
static void SetSysClockTo120_HSI( void );
|
|
#elif defined SYSCLK_FREQ_144MHz_HSI
|
|
static void SetSysClockTo144_HSI( void );
|
|
|
|
#endif
|
|
|
|
/*********************************************************************
|
|
* @fn SystemInit
|
|
*
|
|
* @brief Setup the microcontroller system Initialize the Embedded Flash Interface,
|
|
* the PLL and update the SystemCoreClock variable.
|
|
*
|
|
* @return none
|
|
*/
|
|
void SystemInit (void)
|
|
{
|
|
// Enable Flash enhance read mode for full 224KB
|
|
#if defined(CH32_FLASH_ENHANCE_READ_MODE) && CH32_FLASH_ENHANCE_READ_MODE == 1
|
|
FLASH->KEYR = 0x45670123; // FLASH_Unlock_Fast();
|
|
FLASH->KEYR = 0xCDEF89AB;
|
|
|
|
FLASH->CTLR |= (1 << 24); // Enhanced Read Mode
|
|
|
|
FLASH->CTLR |= (1 << 15); // FLASH_Lock_Fast();
|
|
#endif
|
|
|
|
RCC->CTLR |= (uint32_t)0x00000001;
|
|
RCC->CFGR0 &= (uint32_t)0xF8FF0000;
|
|
RCC->CTLR &= (uint32_t)0xFEF6FFFF;
|
|
RCC->CTLR &= (uint32_t)0xFFFBFFFF;
|
|
RCC->CFGR0 &= (uint32_t)0xFF80FFFF;
|
|
RCC->INTR = 0x009F0000;
|
|
SetSysClock();
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn SystemCoreClockUpdate
|
|
*
|
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
|
*
|
|
* @return none
|
|
*/
|
|
void SystemCoreClockUpdate (void)
|
|
{
|
|
uint32_t tmp = 0, pllmull = 0, pllsource = 0, Pll_6_5 = 0;
|
|
|
|
tmp = RCC->CFGR0 & RCC_SWS;
|
|
|
|
switch (tmp)
|
|
{
|
|
case 0x00:
|
|
SystemCoreClock = HSI_VALUE;
|
|
break;
|
|
case 0x04:
|
|
SystemCoreClock = HSE_VALUE;
|
|
break;
|
|
case 0x08:
|
|
pllmull = RCC->CFGR0 & RCC_PLLMULL;
|
|
pllsource = RCC->CFGR0 & RCC_PLLSRC;
|
|
pllmull = ( pllmull >> 18) + 2;
|
|
|
|
if(pllmull == 17) pllmull = 18;
|
|
|
|
if (pllsource == 0x00)
|
|
{
|
|
if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE){
|
|
SystemCoreClock = HSI_VALUE * pllmull;
|
|
}
|
|
else{
|
|
SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
#if defined (CH32V20x_D8W)
|
|
if((RCC->CFGR0 & (3<<22)) == (3<<22))
|
|
{
|
|
SystemCoreClock = ((HSE_VALUE>>1)) * pllmull;
|
|
}
|
|
else
|
|
#endif
|
|
if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET)
|
|
{
|
|
#if defined (CH32V20x_D8) || defined (CH32V20x_D8W)
|
|
SystemCoreClock = ((HSE_VALUE>>2) >> 1) * pllmull;
|
|
#else
|
|
SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
#if defined (CH32V20x_D8) || defined (CH32V20x_D8W)
|
|
SystemCoreClock = (HSE_VALUE>>2) * pllmull;
|
|
#else
|
|
SystemCoreClock = HSE_VALUE * pllmull;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
if(Pll_6_5 == 1) SystemCoreClock = (SystemCoreClock / 2);
|
|
|
|
break;
|
|
default:
|
|
SystemCoreClock = HSI_VALUE;
|
|
break;
|
|
}
|
|
|
|
tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)];
|
|
SystemCoreClock >>= tmp;
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClock
|
|
*
|
|
* @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClock(void)
|
|
{
|
|
#ifdef SYSCLK_FREQ_HSE
|
|
SetSysClockToHSE();
|
|
#elif defined SYSCLK_FREQ_48MHz_HSE
|
|
SetSysClockTo48_HSE();
|
|
#elif defined SYSCLK_FREQ_56MHz_HSE
|
|
SetSysClockTo56_HSE();
|
|
#elif defined SYSCLK_FREQ_72MHz_HSE
|
|
SetSysClockTo72_HSE();
|
|
#elif defined SYSCLK_FREQ_96MHz_HSE
|
|
SetSysClockTo96_HSE();
|
|
#elif defined SYSCLK_FREQ_120MHz_HSE
|
|
SetSysClockTo120_HSE();
|
|
#elif defined SYSCLK_FREQ_144MHz_HSE
|
|
SetSysClockTo144_HSE();
|
|
#elif defined SYSCLK_FREQ_48MHz_HSI
|
|
SetSysClockTo48_HSI();
|
|
#elif defined SYSCLK_FREQ_56MHz_HSI
|
|
SetSysClockTo56_HSI();
|
|
#elif defined SYSCLK_FREQ_72MHz_HSI
|
|
SetSysClockTo72_HSI();
|
|
#elif defined SYSCLK_FREQ_96MHz_HSI
|
|
SetSysClockTo96_HSI();
|
|
#elif defined SYSCLK_FREQ_120MHz_HSI
|
|
SetSysClockTo120_HSI();
|
|
#elif defined SYSCLK_FREQ_144MHz_HSI
|
|
SetSysClockTo144_HSI();
|
|
|
|
#endif
|
|
|
|
/* If none of the define above is enabled, the HSI is used as System clock
|
|
* source (default after reset)
|
|
*/
|
|
}
|
|
|
|
#ifdef SYSCLK_FREQ_HSE
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockToHSE
|
|
*
|
|
* @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockToHSE(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
|
StartUpCounter++;
|
|
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
|
|
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1;
|
|
|
|
/* Select HSE as system clock source
|
|
* CH32V20x_D6 (HSE=8MHZ)
|
|
* CH32V20x_D8 (HSE=32MHZ)
|
|
* CH32V20x_D8W (HSE=32MHZ)
|
|
*/
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_HSE;
|
|
|
|
/* Wait till HSE is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04)
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
* configuration. User can add here some code to deal with this error
|
|
*/
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_48MHz_HSE
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo48_HSE
|
|
*
|
|
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo48_HSE(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
|
StartUpCounter++;
|
|
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
|
|
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 6 = 48 MHz (HSE=8MHZ)
|
|
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ)
|
|
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ)
|
|
*/
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* If HSE fails to start-up, the application will have wrong clock
|
|
* configuration. User can add here some code to deal with this error
|
|
*/
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_56MHz_HSE
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo56_HSE
|
|
*
|
|
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo56_HSE(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
|
StartUpCounter++;
|
|
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
|
|
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 7 = 56 MHz (HSE=8MHZ)
|
|
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ)
|
|
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ)
|
|
*/
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* If HSE fails to start-up, the application will have wrong clock
|
|
* configuration. User can add here some code to deal with this error
|
|
*/
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_72MHz_HSE
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo72_HSE
|
|
*
|
|
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo72_HSE(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
|
StartUpCounter++;
|
|
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
|
|
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 9 = 72 MHz (HSE=8MHZ)
|
|
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ)
|
|
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ)
|
|
*/
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
|
|
RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* If HSE fails to start-up, the application will have wrong clock
|
|
* configuration. User can add here some code to deal with this error
|
|
*/
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_96MHz_HSE
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo96_HSE
|
|
*
|
|
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo96_HSE(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
|
StartUpCounter++;
|
|
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
|
|
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 12 = 96 MHz (HSE=8MHZ)
|
|
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ)
|
|
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ)
|
|
*/
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
|
|
RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* If HSE fails to start-up, the application will have wrong clock
|
|
* configuration. User can add here some code to deal with this error
|
|
*/
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_120MHz_HSE
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo120_HSE
|
|
*
|
|
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo120_HSE(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
|
StartUpCounter++;
|
|
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
|
|
if((RCC->CTLR & RCC_HSERDY) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if(HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (CH32V20x_D8W)
|
|
RCC->CFGR0 |= (uint32_t)(3<<22);
|
|
/* HCLK = SYSCLK/2 */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV2;
|
|
#else
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
#endif
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 15 = 120 MHz (HSE=8MHZ)
|
|
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 15 = 120 MHz (HSE=32MHZ)
|
|
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/2 * 15 = 240 MHz (HSE=32MHZ)
|
|
*/
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE |
|
|
RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* If HSE fails to start-up, the application will have wrong clock
|
|
* configuration. User can add here some code to deal with this error
|
|
*/
|
|
}
|
|
}
|
|
#elif defined SYSCLK_FREQ_144MHz_HSE
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo144_HSE
|
|
*
|
|
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo144_HSE(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
RCC->CTLR |= ((uint32_t)RCC_HSEON);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTLR & RCC_HSERDY;
|
|
StartUpCounter++;
|
|
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
|
|
if ((RCC->CTLR & RCC_HSERDY) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 18 = 144 MHz (HSE=8MHZ)
|
|
* CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ)
|
|
* CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ)
|
|
*/
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
|
|
RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* If HSE fails to start-up, the application will have wrong clock
|
|
* configuration. User can add here some code to deal with this error
|
|
*/
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_48MHz_HSI
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo48_HSI
|
|
*
|
|
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo48_HSI(void)
|
|
{
|
|
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
|
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_56MHz_HSI
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo56_HSI
|
|
*
|
|
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo56_HSI(void)
|
|
{
|
|
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
|
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSI * 7 = 48 MHz */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_72MHz_HSI
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo72_HSI
|
|
*
|
|
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo72_HSI(void)
|
|
{
|
|
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
|
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_96MHz_HSI
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo96_HSI
|
|
*
|
|
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo96_HSI(void)
|
|
{
|
|
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
|
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSI * 12 = 96 MHz */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_120MHz_HSI
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo120_HSI
|
|
*
|
|
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo120_HSI(void)
|
|
{
|
|
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
|
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSI * 15 = 120 MHz */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE |
|
|
RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
#elif defined SYSCLK_FREQ_144MHz_HSI
|
|
|
|
/*********************************************************************
|
|
* @fn SetSysClockTo144_HSI
|
|
*
|
|
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
|
|
*
|
|
* @return none
|
|
*/
|
|
static void SetSysClockTo144_HSI(void)
|
|
{
|
|
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
|
|
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSI * 18 = 144 MHz */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
|
|
|
|
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTLR |= RCC_PLLON;
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTLR & RCC_PLLRDY) == 0)
|
|
{
|
|
}
|
|
/* Select PLL as system clock source */
|
|
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
|
|
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
|
|
{
|
|
}
|
|
}
|
|
|
|
#endif
|