74 lines
3.6 KiB
C
74 lines
3.6 KiB
C
/** \addtogroup group_configuration
|
|
* @{ */
|
|
|
|
//--------------------------------------------------------------------+
|
|
// COMMON CONFIGURATION
|
|
//--------------------------------------------------------------------+
|
|
|
|
/// \brief tell the stack which mode (host/device/otg) the usb controller0 will be operated on. Possible value is
|
|
/// from \ref TUSB_MODE. Note the hardware usb controller must support the selected mode.
|
|
#define TUSB_CFG_CONTROLLER_0_MODE
|
|
|
|
/** USB controller in MCU often has limited access to specific RAM section. The Stack will use this macro to place internal variables
|
|
into the USB RAM section as follows. if your mcu's usb controller has no such limit, define TUSB_CFG_ATTR_USBRAM as empty macro.
|
|
|
|
@code
|
|
TUSB_CFG_ATTR_USBRAM uint8_t usb_xfer_buffer[10];
|
|
@endcode
|
|
*/
|
|
#define TUSB_CFG_ATTR_USBRAM
|
|
|
|
#define TUSB_CFG_MCU ///< Select one of the supported MCU, the value must be from \ref config_mcu_selection
|
|
#define TUSB_CFG_OS ///< Select one of the supported RTOS, the value must be from \ref TUSB_OS RTOS.
|
|
#define TUSB_CFG_OS_TASK_PRIO ///< If \ref TUSB_CFG_OS is configured to use a real RTOS (other than TUSB_OS_NONE). This determines the priority of the usb stack task.
|
|
|
|
//--------------------------------------------------------------------+
|
|
// HOST CONFIGURATION
|
|
//--------------------------------------------------------------------+
|
|
/** \defgroup TUSB_CFG_HOST Host Options
|
|
* @{ */
|
|
|
|
/** \brief Maximum number of device host stack can manage
|
|
* \n If hub class is not enabled, set this equal to number of controllers in host mode
|
|
* \n If hub class is enabled, make sure hub is also counted */
|
|
#define TUSB_CFG_HOST_DEVICE_MAX
|
|
|
|
/// \brief Buffer size used for getting device configuration descriptor. You may want to increase this from default (256)
|
|
/// to support lengthy composite device especially with Audio or Video class
|
|
#define TUSB_CFG_HOST_ENUM_BUFFER_SIZE
|
|
|
|
/** \defgroup config_host_class Class Driver
|
|
* \brief For each Class Driver a value of 1 means enable, value of 0 mean disable
|
|
* @{ */
|
|
#define TUSB_CFG_HOST_HUB ///< Enable Hub Class
|
|
#define TUSB_CFG_HOST_HID_KEYBOARD ///< Enable HID Class for Keyboard
|
|
#define TUSB_CFG_HOST_HID_MOUSE ///< Enable HID Class for Mouse
|
|
#define TUSB_CFG_HOST_HID_GENERIC ///< Enable HID Class for Generic (not supported yet)
|
|
#define TUSB_CFG_HOST_MSC ///< Enable Mass Storage Class (SCSI subclass only)
|
|
#define TUSB_CFG_HOST_CDC ///< Enable Virtual Serial (Communication Device Class)
|
|
#define TUSB_CFG_HOST_CDC_RNDIS ///< Enable Remote Network Device (require TUSB_CFG_HOST_CDC to be enabled)
|
|
/** @} */
|
|
|
|
/** @} */ // group Host
|
|
|
|
//--------------------------------------------------------------------+
|
|
// DEVICE CONFIGURATION
|
|
//--------------------------------------------------------------------+
|
|
/** \defgroup TUSB_CFG_DEVICE Device Options
|
|
* \brief For each Class Driver a value of 1 means enable, value of 0 mean disable
|
|
* @{ */
|
|
|
|
/** \defgroup config_device_class Class Driver
|
|
* \brief For each Class Driver a value of 1 means enable, value of 0 mean disable
|
|
* @{ */
|
|
#define TUSB_CFG_DEVICE_HID_KEYBOARD ///< Enable HID Class for Keyboard
|
|
#define TUSB_CFG_DEVICE_HID_MOUSE ///< Enable HID Class for Mouse
|
|
#define TUSB_CFG_DEVICE_HID_GENERIC ///< Enable HID Class for Generic (not supported yet)
|
|
#define TUSB_CFG_DEVICE_MSC ///< Enable Mass Storage Class (SCSI subclass only)
|
|
#define TUSB_CFG_DEVICE_CDC ///< Enable Virtual Serial (Communication Device Class)
|
|
/** @} */
|
|
|
|
/** @} */ // group Device
|
|
|
|
/** @} */
|